Parts list

Raspberry Pi Zero W* / supported alternatives:
- Raspberry Pi Zero WH (best option, with populated header) link
- Raspberry Pi Zero W (without header, you have to solder a header) link
- Raspberry Pi Zero 2 W (possible, but you have to create an image from scratch) link
Micro SD Card (16 - 64 GB tested) link
DC-DC Adjustable Step Up Power Module (5V->12V) e.g. LM2587S or HW-637
Multi Coin Acceptor (programmable, e.g. Coin Acceptor 616 or this)
Display with HAT / supported alternatives:
- PaPiRus Zero 2.0 "- ePaper pHAT
- Inky pHAT 2.13inch ePaper/eInk/EPD
- Waveshare 2.13inch e-Paper HAT link
- Waveshare 2.13inch e-Paper HAT (D) link (Recommendation for Pocket Edition!)
- Waveshare 2.66inch e-Paper E-Ink Display Module + HAT
- Waveshare 2.7inch E-Ink display HAT link
Micro USB cable link
Jumper cable link
A good USB power supply. Power adapter or power pack with 2 amps.

Push Button (Recommended option!). Optionally with LED (3V) e.g. this example. For the LED you will also need a resistor.
Lockout Relay Module (Makes sense!) e.g. HW-482 or KY-019
Raspberry Pi Camera 5MP OV5647
ATM Case (self printing DXF files or STL files for Pocket Edition plus threaded insert or buy from Fulmo)

Provide feedback