GitHub - ASukhanov/MPCEX: Online software for MPCEX detector of PHENIX experiment at RHIC

ASukhanov / MPCEX Public

Notifications You must be signed in to change notification settings
Fork 0
Star 0

Online software for MPCEX detector of PHENIX experiment at RHIC

Notifications

Name		Name	Last commit message	Last commit date
Latest commit History 216 Commits
README		README
alternating_cellid_test.sh		alternating_cellid_test.sh
carrier_config.sh		carrier_config.sh
chipskop.sh		chipskop.sh
chipskop.stp		chipskop.stp
chipskop_grab.sh		chipskop_grab.sh
common_onReboot.sh		common_onReboot.sh
dialog_jtag.sh		dialog_jtag.sh
dialog_run.sh		dialog_run.sh
doall.sh		doall.sh
dqc.py		dqc.py
dqcapture.py		dqcapture.py
dump16.stp		dump16.stp
dump_event.sh		dump_event.sh
dumpfem.stp		dumpfem.stp
femoff.sh		femoff.sh
femon.sh		femon.sh
femstart.sh		femstart.sh
gtm_lkl.sh		gtm_lkl.sh
gtm_scan.sh		gtm_scan.sh
jtag_flash.sh		jtag_flash.sh
jtag_flash_carrier.sh		jtag_flash_carrier.sh
jtag_path.py		jtag_path.py
low_voltage_control.sh		low_voltage_control.sh
mount_disks.sh		mount_disks.sh
mpcex_lv_controller.py		mpcex_lv_controller.py
mpcex_lv_controller.sh		mpcex_lv_controller.sh
onReboot_template.sh		onReboot_template.sh
on_FEM_powerup.sh		on_FEM_powerup.sh
plot_chipskop.py		plot_chipskop.py
rpi_cmd.sh		rpi_cmd.sh
rpi_parallel_cmd.sh		rpi_parallel_cmd.sh
rpi_serial_cmd.sh		rpi_serial_cmd.sh
run.sh		run.sh
send_calstrobe_to_carrier.sh		send_calstrobe_to_carrier.sh
sequencer.sh		sequencer.sh
set_fem_id.sh		set_fem_id.sh
setfem.py		setfem.py
splayer_dump.py		splayer_dump.py
spy_arm.sh		spy_arm.sh
spy_event.sh		spy_event.sh
spy_fem.sh		spy_fem.sh
svx1.stp		svx1.stp
svx3.stp		svx3.stp
svx3_91.stp		svx3_91.stp
svx3_d1.stp		svx3_d1.stp
svx6.stp		svx6.stp
svx_download.sh		svx_download.sh
svxall.stp		svxall.stp
svxall_gain_high_drive_low.stp		svxall_gain_high_drive_low.stp
test_carrier_data.sh		test_carrier_data.sh
test_one_event.sh		test_one_event.sh
test_sdo.sh		test_sdo.sh
test_serial_commands.sh		test_serial_commands.sh
udp_receiver.py		udp_receiver.py
udp_sender.py		udp_sender.py
view_carriers.sh		view_carriers.sh
view_status.sh		view_status.sh

Repository files navigation

Slow control and test software for MPCEX detector of PHENIX experiment at RHIC. 
All programs (except dqcapture.py) are executed on the Raspberry Pi's. 

Usage:

After power cycling of FEM:
  ./onReboot.s

Download of carrier boards on FEMa:
  ./doall.sh a

To enable FEMs:
  ./femon.sh ab

To disable FEMs:
  ./femoff.sh ab
//,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
//'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
// Stress Test
//
Start Cell ID checker on two FEMs, it make sense to run them in a separate ssh 
session. They do not interfere with other FEM operations although loads 
the CPU significantly.
  ./cellids.sh a

Start stress test of both FEMs using their local GTM simulators:
  ./gtm_scan.sh ab

If gtm_scan.sh have been interrupted, then the GTM simulators will be left generating the latest pattern.
To stop the GTM simulators:
	./gtm_local ab -g stop 
//,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
//'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
FPGA device info of the FEMa:
  ./jtag_flash.sh a

Flash the latest FEMr1*.stp file into the FEMa:
  ./jtag_flash.sh a program

Flash the carrier board a0:
  ./jtag_flash.sh a0 -f CARB_U1-r124.stp -p
//,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,