This repo will hold the flasher-tool to upload/flash a custom verion of Wifi Marauder along with 3D files to print different cases for the CYD AKA Cheap Yellow Display. This build features a few great fixes and customzations.
-
RGB LED enabled for builds w/o GPS thanks to lsdlsd88
-
Detect Pwnagotchi enabled in the WiFi Sniffers submenu. (currently for builds without GPS. Fix hopefully soon)
-
SwiftPair Spam now 100% functional — Samsung, Google, and BLE spam crashing should now be nonexistent.
-
Evil Portal storage adjustment — Moves all portals into a folder instead of root of sd card.
-
For info on adding an external antenna, click here.
- 🛰 GPS is enabled on builds not labled (NoGPS) in the flasher tool and it is fully operational through the 4-pin connector located near the MicroUSB port of the CYD module.
Check HERE for details on supported GPS hardware.
Successfully tested on both of these devices:
No hardware modifications required thanks to integration with @ggaljoen's TFT_eSPI fork.
-
Simple Install: You can choose to use the CM-Box flasher tool to flash the latest version of CM-Box (Custom Marauder box) to your CYD.
-
Hands-On Install: Or you can choose to build from source (CYD-ESP32Marauder) for a more hands on experince. Both options result in the same installation the second option gives you the ability to modify the files further if your comfy with that.
CM-Box flasher tool
Arduino Sketch Files
- CYD aka Cheap Yellow Display. (Can be found HERE)
- 1 rocker switch (Can be found HERE) 19mm x 13mm
- 1 Voltmeter (Can be found HERE)
- 1 Lipo battery (Can be found HERE)
- x4 M3x20mm hex head screws. (Can be found HERE)
- Download and print the stl files located in 3D files folder. All files are ready to print.
- Consult parts list above^
- Process coming soon. (Pics are being taken of a new build for ref.)
If you flashed from the Custom Marauder Flasher tool for CYD or built from CYD-ESP32Marauder then You must create a folder on the root of your sd card titled "portals". This is where you will store the Evil Portal html files along with the index.html file.
Head over to the 3D files section to download the stl files need to print the CM-Box. The files are only for the 1 micro usb version at this time.
A huge thank you goes to two wonderful people. Whom without I would have not made it as far as I did learning.
Thanks to Fr4nkFletcher for all your guidance and late night replies.
And thank you to smoochiee for helping with the bootscreen and the badass tuts for building our own Marauder.
A big thank you as well goes to the creators and supporters of the ESP32 Cheap Yellow Display project and the community Discord, especially @cod5fgzj, ggaljoen.
And of course JustCallMeKokofor the foundational work on ESP32 Marauder.