Replies: 8 comments 20 replies
-
|
Not sure what I did. Decreased size of the compass rose and everything is back |
Beta Was this translation helpful? Give feedback.
-
|
Tried a couple of times a few days ago and it worked. If activate the new overlay mode still works. But... Now when I try to run the editor, it just sits there loading forever (the rotating balls thing). Sorry for nicking the thread BobW55, but I think my issue might be realated to yours. |
Beta Was this translation helpful? Give feedback.
-
|
Well... sorry for the inconvenience. Looks like the module deactivated for days kind of automatically. |
Beta Was this translation helpful? Give feedback.
-
|
@BobW55 The Pi rarely needs to be rebooted due to Allsky. Only after an installation. Restarting the Allsky service should do it. |
Beta Was this translation helpful? Give feedback.
-
|
Yes this I know. Had to the other night, bad storm, multiple power failures. really messed up the RPi till I rebooted. |
Beta Was this translation helpful? Give feedback.
-
|
I assume that wasn't an Allsky issue, correct? |
Beta Was this translation helpful? Give feedback.
-
Are you running the latest version of the dev branch - This was an issue but I fixed it a while ago. |
Beta Was this translation helpful? Give feedback.
-
|
OK I think I found the issue. If you place a graphic or picture, and any part of it falls outside the frame of the allsky image, the overlay will fail. |
Beta Was this translation helpful? Give feedback.
-
|
I suspect I might have placed some text so close to the border that it is actully a couple of bits off. Maybe I could manually edit the setup file and ammend it (if I knew wich one is it...) |
Beta Was this translation helpful? Give feedback.
-
|
Found it. But I cannot see anything wrong.... |
Beta Was this translation helpful? Give feedback.
-
|
Interesting that the first "fontPath" doesn't start with |
Beta Was this translation helpful? Give feedback.
-
|
@Alex-developer, Didn't you fix this a month or so ago? Or was that fix for rotated pictures? |
Beta Was this translation helpful? Give feedback.
-
|
I am not on Discord. As far as I know I am on the latest. |
Beta Was this translation helpful? Give feedback.
-
|
Sorry for the stupid question. Rookie one. I clone again the dev branch and install again does it repect the existing setup? |
Beta Was this translation helpful? Give feedback.
-
|
@ea1ii If you rename the current "allsky" directory to "allsky-OLD" then download and install the new version, the install.sh script will see the old one and ask if you want to keep its images, darks, and configuration. You'll need to manually copy the old config.sh and ftp-settings.sh files (I think). |
Beta Was this translation helpful? Give feedback.
-
|
Cheers |
Beta Was this translation helpful? Give feedback.
-
|
Well..., that worked perfectly. I was editing the overlays succesfully for a while. But it seems is not myself proof. Eventually removed the fonts with nano and it works again. PSE find attached a back up from the offending setup for debuggin purposes. |
Beta Was this translation helpful? Give feedback.
-
|
@BobW55 If you create a Discord login we can invite you. We do almost all our test-related discussions there. |
Beta Was this translation helpful? Give feedback.
-
|
Have discord. = Bobbo
Send invite.
…On Sun, Jan 22, 2023 at 1:31 AM EricClaeys ***@***.***> wrote:
@BobW55 <https://github.com/BobW55> If you create a Discord login we can
invite you. We do almost all our test-related discussions there.
—
Reply to this email directly, view it on GitHub
<#2131 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A4JBJ2ZCE3S2PF7L2HCRBP3WTTH2TANCNFSM6AAAAAAUA4Q6UQ>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
--
Bob Waterfield
K8POS
|
Beta Was this translation helpful? Give feedback.
-
|
That would help wouldn't it. Tell how often I get on discord.
#147
…On Sun, Jan 22, 2023 at 8:00 AM Dentonknifeworks ***@***.***> wrote:
BobW55 what is your discord ID # ?
go into discord and right click-your user icon and copy ID need that to
find you in discord
—
Reply to this email directly, view it on GitHub
<#2131 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A4JBJ2YMUA4EZG3QXETDL53WTUVPRANCNFSM6AAAAAAUA4Q6UQ>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
--
Bob Waterfield
K8POS
|
Beta Was this translation helpful? Give feedback.
-
|
Email me at dentonknifeworks at gmail dot com I will send you an invite |
Beta Was this translation helpful? Give feedback.
-
|
It's possible that there could be several reasons why the overlays stopped working. One possible reason could be a software update or change that caused a conflict or error with the overlay module. Another possible reason could be a hardware issue, such as a connection problem with the camera or Raspberry Pi. It would be helpful to check the logs or error messages to see if there are any clues as to what caused the problem. Additionally, you can try restarting the AllSky software or rebooting the Raspberry Pi to see if that resolves the issue. |
Beta Was this translation helpful? Give feedback.
-
|
Figured it out, had a picture half in half out of frame. Allsky did not like it. |
Beta Was this translation helpful? Give feedback.
-
|
@BobW55 FYI, we believe it's likely that bikeDiavm is ChapGPT, whose answers seem reasonable but indicate no real knowledge of Allsky. |
Beta Was this translation helpful? Give feedback.
-
Use overlays is enabled in Settings
the overlay module is selected and Checked for day and night time.
Several data selections are placed on overlay editor screen and saved.
Was working and then just quit.
Beta Was this translation helpful? Give feedback.
All reactions