Replies: 17 comments 21 replies
-
Allsky doesn't support that camera. We currently support the Raspberry Pi cameras plus a few Arducam ones.
Then attach the output of those commands as well as |
Beta Was this translation helpful? Give feedback.
-
Hi! |
Beta Was this translation helpful? Give feedback.
-
no /tmp/camera.json.txt file... |
Beta Was this translation helpful? Give feedback.
-
any idea? is this a issue? |
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
Waveshare IMX219-D160 PRETTY_NAME="Raspbian GNU/Linux 12 (bookworm)" no libcamera software needed |
Beta Was this translation helpful? Give feedback.
-
@ebonnevi, that camera isn't supported by Allsky yet, but I can add support.
Then attach |
Beta Was this translation helpful? Give feedback.
-
@ebonnevi, I am pretty sure this camera has a maximum exposure time of 11 seconds which means it is not very useful as an allsky camera.
and post the output. |
Beta Was this translation helpful? Give feedback.
-
@ebonnevi,
If that fails, let me know whatever messages appear and attach |
Beta Was this translation helpful? Give feedback.
-
@nikivan1, Nick, would you please also run the commands above when your imx219 camera is attached? |
Beta Was this translation helpful? Give feedback.
-
it failed at "make capture_RPI"
error message:
~~~
Building capture_RPi.o ...
In file included from capture_RPi.cpp:30:
ASI_functions.cpp: In function 'void saveCameraInfo(ASI_CAMERA_INFO, const
char*, int, int, double, const char*)':
ASI_functions.cpp:1175:28: error: 'NO_DEFAULT' was not declared in this
scope; did you mean 'IS_DEFAULT'?
1175 | if (def == NO_DEFAULT)
| ^~~~~~~~~~
| IS_DEFAULT
make: *** [Makefile:131: capture_RPi.o] Error 1
~~~
|
Beta Was this translation helpful? Give feedback.
-
Version: v2023.05.01_04
…On Mon, Mar 4, 2024 at 3:48 PM Eric Claeys ***@***.***> wrote:
What version of Allsky are you running? Look at the top of the WebUI if
you don't know.
—
Reply to this email directly, view it on GitHub
<#3384 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/APXAQORJP5632AXUTHJNMPTYWTMYHAVCNFSM6AAAAABCQTHXSWVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DMNZRG44DS>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Hmmm. It should have worked in that release. |
Beta Was this translation helpful? Give feedback.
-
Yes it's working now!
thank a lot for your help!
…On Mon, Mar 4, 2024 at 3:51 PM Eric Claeys ***@***.***> wrote:
Hmmm. It should have worked in that release.
Please run grep NO_DEFAULT ~/allsky/src/include/allsky_common.h.
Then try with this file.
ASI_functions.cpp.txt
<https://github.com/AllskyTeam/allsky/files/14487041/ASI_functions.cpp.txt>
—
Reply to this email directly, view it on GitHub
<#3384 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/APXAQORBC6TEWSM3AOJQ76TYWTNFHAVCNFSM6AAAAABCQTHXSWVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DMNZRHAZDG>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
@EricClaeys After rerunning the installation script, this camera is working now. Thank you for your support. |
Beta Was this translation helpful? Give feedback.
-
@nikivan1, Nick, Great to hear!! The change is also in the next release so it'll be "official". I assume you are a "happy customer"? |
Beta Was this translation helpful? Give feedback.
-
libcamera-hello |
Beta Was this translation helpful? Give feedback.
-
Here is the result of running libcamera-hello
Made DRM preview window
[0:08:26.061765005] [1872] INFO Camera camera_manager.cpp:297 libcamera v0.0.5+83-bde9b04f
[0:08:26.150645972] [1873] WARN RPI vc4.cpp:383 Mismatch between Unicam and CamHelper for embedded data usage!
[0:08:26.151987727] [1873] INFO RPI vc4.cpp:437 Registered camera /base/soc/i2c0mux/i2c@1/imx219@10 to Unicam device /dev/media3 and ISP device /dev/media0
[0:08:26.152090794] [1873] INFO RPI pipeline_base.cpp:1101 Using configuration file '/usr/share/libcamera/pipeline/rpi/vc4/rpi_apps.yaml'
[0:08:26.153697953] [1872] INFO Camera camera.cpp:1033 configuring streams: (0) 1640x1232-YUV420
[0:08:26.154601292] [1873] INFO RPI vc4.cpp:565 Sensor: /base/soc/i2c0mux/i2c@1/imx219@10 - Selected sensor format: 1640x1232-SBGGR10_1X10 - Selected unicam format: 1640x1232-pBAA
I can see the image on the TV connected to the RPi via HDMI.
But the installation process of AllSky fails with the following message:
*** ERROR:
No camera detected - installation aborted.
Beta Was this translation helpful? Give feedback.
All reactions