AllSky and Raspberry Pi Connect

[GeneHun2]

Hello All. I am very, very new to Raspberry Pi5 and not very good at code. I installed AllSky successfully with my ZWO ASI662 and ran it last night and it worked fine. Here is my issue. I can't seem to use Raspberry Pi Connect now that I have installed Allsky. Is this normal, abnormal? What can I do to continue to remotely log into my RPi5 with Raspberry Pi Connect? l need some hints on what to look for and how to fix if possible.
Any help would be greatly appreciated.

[EricClaeys]

@GeneHun2, welcome to Allsky! I hope you enjoy it as much as I have.

Allsky does not change anything in the network, although it will usually change the name of the Pi to allsky, so I would start there.

I am not familiar with Raspberry Pi Connect - does it use the name, or IP address of the Pi to connect?

[GeneHun2]

Thank you for the reply. I will change the name in RP Connect and see how that works.

[Kilis71]

I recommend you use VNC to connect remotely

[GeneHun2]

Thank you.

[Jsorace04]

Hi @GeneHun2, this is the same camera I was looking to buy. Are you able to share some nighttime shots from your allsky camera?

Thanks

[GeneHun2]

Well I don't have any nighttime shots. I am still leaning how to get the pics from my raspberry and I have it off line right now setting up my weather station. I have a lot to learn! But here is a daytime shot.

[GeneHun2]

Please understand that this shot is just one of my first test shots. I ran allsky for a few days and the pics look really good.

[Jsorace04]

Looks good! If you get any nighttime shots please share if you can!