AxxSolder V2.2.4
Stable release of AxxSolder v2.2.4
Changes from previous release (AxxSolder v2.2.3):
- It was found that when using C245 cartridges, the ADC saturates for temperatures over 445 deg C. This is catastrophic if the SET temperature is over 445 deg C as the PID controller will just continue to pump out more and more energy into the tip without getting the temperature up over 445 deg C.
This is fixed by setting the max allowed temperature to be 430 deg C in this release.
In future hardware this will be solved by decreasing the op-amp gain slightly.