Releasing v24.11

Makefile

@@ -84,7 +84,7 @@ develop:
 	@echo ""
 	@pip uninstall -y $(PKG_NAME)
 	@pip install $(DEPENDENCIES)
-	@$(PYTHON) setup.py develop --no-deps
+	@pip install -e . --no-deps
 	@echo ""
 	@echo "Completed building and installing: $@"
 	@echo ""
@@ -97,7 +97,7 @@ undevelop:
 	@echo "Uninstalling $(PKG_NAME) development distributable: $@"
 	@echo ""
 
-	@$(PYTHON) setup.py develop --no-deps -q --uninstall
+	@pip uninstall $(PKG_NAME) -y
 
 	@echo ""
 	@echo "Completed uninstalling: $@"

docs/changelog/2024/november.rst

@@ -0,0 +1,29 @@
+November 2024
+==========
+
+November 26 - Unicon v24.11
+------------------------
+
+
+
+.. csv-table:: Module Versions
+    :header: "Modules", "Versions"
+
+        ``unicon.plugins``, v24.11
+        ``unicon``, v24.11
+
+
+
+
+Changelogs
+^^^^^^^^^^
+--------------------------------------------------------------------------------
+                                      Fix                                       
+--------------------------------------------------------------------------------
+
+* unicon/bases
+    * Router/connection_provider
+        * Updated designate_handles to not change state of standby if it is locked.
+        * Added quad device specific unlock_standby method to execute configs only on Active console
+
+

docs/changelog/index.rst

@@ -4,6 +4,7 @@ Changelog
 .. toctree::
    :maxdepth: 2
 
+   2024/november
    2024/october
    2024/September
    2024/august

docs/changelog_plugins/2024/november.rst

@@ -0,0 +1,50 @@
+November 2024
+==========
+
+November 26 - Unicon.Plugins v24.11
+------------------------
+
+
+
+.. csv-table:: Module Versions
+    :header: "Modules", "Versions"
+
+        ``unicon.plugins``, v24.11
+        ``unicon``, v24.11
+
+
+
+
+Changelogs
+^^^^^^^^^^
+--------------------------------------------------------------------------------
+                                      Fix                                       
+--------------------------------------------------------------------------------
+
+* iosxe
+    * Added UT for Quad device to test scenario when standby console is disabled
+
+* iosxr
+    * SPITFIRE plugin
+        * Added UNICON_BACKEND_DECODE_ERROR_LIMIT with a default value of 10, to handle scenarios when the device is slow
+
+* hvrp
+    * Update config pattern
+    * Update configure service to handle immediate vs two-stage config mode
+
+* nxos
+    * modify regex to handle new error pattern for NXOS
+
+* generic
+    * Modified enable_secret regex pattern to accommodate various outputs
+    * Updated password_handler to pass password if password key in context dict
+
+
+--------------------------------------------------------------------------------
+                                      Add                                       
+--------------------------------------------------------------------------------
+
+* iosxe
+    * Update prompt recovery command
+
+

docs/changelog_plugins/index.rst

@@ -4,6 +4,7 @@ Plugins Changelog
 .. toctree::
    :maxdepth: 2
 
+   2024/november
    2024/october
    2024/September
    2024/august

src/unicon/plugins/__init__.py

@@ -1,4 +1,4 @@
-__version__ = '24.10'
+__version__ = '24.11'
 
 supported_chassis = [
     'single_rp',

src/unicon/plugins/generic/patterns.py

@@ -73,7 +73,7 @@ def __init__(self):
 
         self.config_start = r'Enter configuration commands, one per line\.\s+End with CNTL/Z\.\s*$'
 
-        self.enable_secret = r'^.*?(Enter|Confirm) enable secret:\s*$'
+        self.enable_secret = r'^.*?(Enter|Confirm) enable secret( \[<Use current secret>\])?:\s*$'
         self.enable_password = r'^.*?enable[\r\n]*.*?[Pp]assword( for )?(\S+)?: ?$'
 
         self.enter_your_selection_2 = r'^.*?Enter your selection( \[2])?:\s*$'

src/unicon/plugins/generic/statements.py

@@ -368,6 +368,8 @@ def password_handler(spawn, context, session):
         if context.get('username', '') == spawn.last_sent.rstrip() or ssh_tacacs_handler(spawn, context):
             if (tacacs_password := context.get('tacacs_password')):
                 spawn.sendline(tacacs_password)
+            elif context.get('password'):
+                spawn.sendline(context['password'])
         else:
             spawn.sendline(context['line_password'])
 

src/unicon/plugins/hvrp/patterns.py

@@ -21,12 +21,12 @@ def __init__(self):
         self.username = r'^.*[Ll]ogin:'
         self.password = r'^.*[Pp]assword:'
 
-        # <HOSTNAME-01> | <HOSTNAME>#
+        # <HOSTNAME>
         self.enable_prompt = r'^(.*)\<%N.*\>$'
 
-
-        # [~HOSTNAME] | <HOSTNAME-01> # # breaks on [\y\n] # Warning: All the configuration will be saved to the next startup configuration. Continue? [y/n]:
-        self.config_prompt = r'^.*\[(~|\*)%N.*\]'
+        # [~HOSTNAME] # two-stage config mode
+        # [HOSTNAME]  # immediate config mode
+        self.config_prompt = r'^.*\[(?P<two_stage>~|\*)?%N.*\]'
 
         # Exit with uncommitted changes? [yes,no] (yes)
         self.commit_changes_prompt = r'Exit with uncommitted changes? [yes,no] (yes)\s*'

src/unicon/plugins/hvrp/service_implementation.py

@@ -22,4 +22,22 @@ def __init__(self, connection, context, **kwargs):
         self.start_state = 'config'
         self.end_state = 'enable'
         self.service_name = 'config'
-        self.commit_cmd = 'commit'
+
+    def pre_service(self, *args, **kwargs):
+        super().pre_service(*args, **kwargs)
+
+        # Check if device is operating in two-stage configuration mode.
+        # =============================================================
+        spawn = self.get_spawn()
+        two_stage = spawn.match.last_match.groupdict().get('two_stage')
+
+        # In the two-stage mode, if the user has modified configurations but has
+        # not submit the modification, the system prompt ~ is changed to *,
+        # prompting the user that the configurations are not submitted. After
+        # the user runs the commit command to submit the configurations, the
+        # system prompt * is restored to ~.
+
+        if two_stage:
+            self.commit_cmd = 'commit'
+        else:
+            self.commit_cmd = ''

src/unicon/plugins/iosxe/quad/statemachine.py

@@ -11,9 +11,6 @@ class IosXEQuadStateMachine(IosXEDualRpStateMachine):
     def create(self):
         super().create()
 
-        # Remove standby_locked state
-        self.remove_state('standby_locked')
-
         # Add RPR state
         rpr = State('rpr', patterns.rpr_state)
         self.add_state(rpr)

src/unicon/plugins/iosxe/settings.py

@@ -12,6 +12,8 @@ def __init__(self):
         # A single cycle of retries wasn't enough to recover an iosxe device
         # just rebooted after a "write erase".
         self.PROMPT_RECOVERY_RETRIES = 2
+        self.PROMPT_RECOVERY_COMMANDS = ['\r', '\x1e', '\x03']
+
         self.ERROR_PATTERN = [
             r'^%\s*[Ii]nvalid (command|input)',
             r'^%\s*[Ii]ncomplete (command|input)',

src/unicon/plugins/iosxr/spitfire/settings.py

@@ -27,6 +27,7 @@ def __init__(self):
             'session-timeout 0'
         ]
         self.CONFIG_TIMEOUT = 600
+        self.UNICON_BACKEND_DECODE_ERROR_LIMIT = 10
         self.STANDBY_STATE_REGEX = r'Standby node .* is (.*)'
 
         # Default commands: Enter key , Ctrl-C, Enter Key

src/unicon/plugins/nxos/setting.py

@@ -42,8 +42,8 @@ def __init__(self):
             r'^%\s*[Nn]ot supported.*',
             r'^%\s*[Ff]ail.*',
             r'^%\s*[Aa]bort.*'
-            r'^%\s*[Ee](RROR|rror).*',
-            r'^%\s*Ambiguous command'
+            r'^%?\s*[Ee](RROR|rror).*',
+            r'^%\s*Ambiguous command',
         ]
 
         self.GUESTSHELL_CONFIG_CMDS = []

src/unicon/plugins/tests/mock_data/hvrp/hvrp_mock_data.yaml

@@ -81,4 +81,15 @@ bgp_config_uncommitted_change:
         - "0:,0,2,0"
       new_state: bgp_config
 
+exec2:
+  prompt: <%N>
+  commands:
+    "system-view":
+      new_state: config2
 
+config2:
+  prompt: "[%N]"
+  commands:
+    "bgp 65000": ""
+    "return":
+      new_state: exec2

src/unicon/plugins/tests/mock_data/iosxe/cat9k_vwlc_reload_logs.txt

@@ -0,0 +1,118 @@
+
+
+           Cisco Systems, Inc.
+
+           170 West Tasman Drive
+
+           San Jose, California 95134-1706
+
+
+
+
+Cisco IOS Software [IOSXE], C9800-CL Software (C9800-CL-K9_IOSXE), Experimental Version 17.17.20240919:014147 [BLD_POLARIS_DEV_LATEST_20240919_003342:/nobackup/mcpre/s2c-build-ws 101]
+
+Copyright (c) 1986-2024 by Cisco Systems, Inc.
+
+Compiled Wed 18-Sep-24 18:42 by mcpre
+
+
+
+This software version supports only Smart Licensing as the software licensing mechanism.
+
+
+
+Please read the following carefully before proceeding. By downloading,
+
+installing, and/or using any Cisco software product, application, feature,
+
+license, or license key (collectively, the "Software"), you accept and
+
+agree to the following terms. If you do not agree, do not proceed and do not
+
+use this Software.
+
+
+This Software and its use are governed by Cisco's General Terms and any 
+
+relevant supplemental terms found at
+
+https://www.cisco.com/site/us/en/about/legal/contract-experience/index.html.
+
+If you have a negotiated agreement with Cisco that includes this Software, the
+
+terms of that agreement apply as well. In the event of a conflict, the order 
+
+of precedence stated in your negotiated agreement controls.
+
+
+Cisco Software is licensed on a term and/or subscription-basis. The license to
+
+the Software is valid only for the duration of the specified term, or in the
+
+case of a subscription-based license, only so long as all required subscription
+
+payments are current and fully paid-up. While Cisco may provide you
+
+licensing-related alerts, it is your sole responsibility to monitor your usage.
+
+Using Cisco Software without a valid license is not permitted and may result in
+
+fees charged to your account. Cisco reserves the right to terminate access to,
+
+or restrict the functionality of, any Cisco Software, or any features thereof,
+
+that are being used without a valid license.
+
+
+
+% Failed to initialize nvram
+
+
+Database already initialized
+
+FIPS: Flash Key Check : Key Not Found, FIPS Mode Not Enabled
+
+platform initcisco C9800-CL (VXE) processor (revision VXE) with 4016588K/3075K bytes of memory.
+
+Processor board ID 9U9NBR9CPLO
+
+Router operating mode: Autonomous
+
+1 Virtual Ethernet interface
+
+3 Gigabit Ethernet interfaces
+
+32768K bytes of non-volatile configuration memory.
+
+8084084K bytes of physical memory.
+
+6201343K bytes of virtual hard disk at bootflash:.
+
+0K bytes of Cloud S3 Storage at cloudfs:.
+
+Installation mode is BUNDLE 
+
+
+
+No startup-config, starting autoinstall/pnp/ztp...
+
+
+Autoinstall will terminate if any input is detected on console
+
+
+Autoinstall trying DHCPv4 on Vlan1
+
+
+--------------------------------------------------
+
+ System is booted with ASCII based startup configuration 
+
+ due to missing binary configuration or previous condition.
+
+ Please perform "write mem" to generate binary
+
+ configuration. System uses binary-config internally to
+
+ reduce overall bootime significantly.
+
+--------------------------------------------------