Skip to content

PC2 implementation of a sync script between slurm and ClusterCockpit

License

Notifications You must be signed in to change notification settings

ClusterCockpit/cc-slurm-sync

 
 

Repository files navigation

Introduction

This script syncs the slurm jobs with the cluster cockpit backend. It uses the slurm command line tools to gather the relevant slurm infos and reads the corresponding info from cluster cockpit via its api. After reading the data, it stops all jobs in cluster cockpit which are not running any more according to slurm and afterwards it creates all new running jobs in cluster cockpit.

The script has to run on the slurm controller node and needs permissions to run the slurm commands squeue and sacct and read data from the slurm state save location.

Requirements / Branches

Depending on your slurm version, you have different dependencies.

Running slurm 22.05 and later

The rest api and its component openapi is changing from version to version. Therefore, we decided to create one branch per slurm major versoin. This should help to track the changes according to each slurm version. If you are running slurm version 23.11.02 you have to checkout the branch slurm-23-11. The master branch will be the development branch for general functionalities. Version specific changes will be merged to the corresponding version branch.

Running slurm < 22.05

If you are runnning slurm 21.08 or something else lower than 22.05, you have to use the commit with tag "openapi_0.0.37", because the data structure of the json output chaned between 21.08 and 22.05.

This script expects a certain data structure in the output of squeue. We have noticed during development that squeue --json does not distinguish between individual CPUs in the resources used and in the output the allocation of CPU 1 and 2 is considered to be the same. However, this may be different for shared nodes if multiple jobs request a certain set of resources.

The cause can be found in the code of the API interface and is based on the fact that the core ID is taken modulo the number of cores on a socket.

The included patch corrects this behavior. It is necessary to recompile slurm for this. The patch is for openapi 0.0.37 but should work with other versions as well.

Getting started

The easiest way is to clone the Git repository. This way you always get the latest updates.

git clone https://github.com/pc2/cc-slurm-sync.git
cd cc-slurm-sync

Configuration file

Before you start, you have to create a configuration file. You can use config.json.example as a starting point. Simply copy or rename it to config.json.

Confiuration options

clustername Type in your clustername here. This value must be the same as the value used in cc-backend to identify the cluster. It might be different to the cluster name used in slurm.

slurm

  • squeue Path to the squeue binary. Defaults to /usr/bin/squeue
  • sacct Path to the sacct binary. Defaults to /usr/bin/sacct
  • scontrol Path to the scontrol binary. Defaults to /usr/bin/scontrol
  • state_save_location Statesave location of slurm. This option has no default value and is mandatory.

cc-backend

  • host The url of the cc-backend api. Must be a valid url excluding trailing /api. This option is mandatory.
  • apikey The JWT token to authenticate against cc-backend. This option is mandatory.

accelerators

This part describes accelerators which might be used in jobs. The format is as follows:

"accelerators" : {
	"n2gpu" : {
		"0": "00000000:03:00.0",
		"1": "00000000:44:00.0",
		"2": "00000000:84:00.0",
		"3": "00000000:C4:00.0"
	},
	"n2dgx" : {
		"0": "00000000:07:00.0",
		"1": "00000000:0F:00.0",
		"2": "00000000:47:00.0",
		"3": "00000000:4E:00.0",
		"4": "00000000:87:00.0",
		"5": "00000000:90:00.0",
		"6": "00000000:B7:00.0",
		"7": "00000000:BD:00.0"
	}
},

The first level (n2gpu) describes the prefix of the host names in which corresponding accelerators are installed. The second level describes the ID in Slurm followed by the device id.

How to get this data? It depends on the accelerators. The following example is for a host with four NVidia A100 GPUs. This should be similar on all hosts with NVidia GPUs:

# nvidia-smi 
Thu Aug 25 14:50:05 2022       
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 510.47.03    Driver Version: 510.47.03    CUDA Version: 11.6     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|                               |                      |               MIG M. |
|===============================+======================+======================|
|   0  NVIDIA A100-SXM...  On   | 00000000:03:00.0 Off |                    0 |
| N/A   58C    P0   267W / 400W |   7040MiB / 40960MiB |     88%      Default |
|                               |                      |             Disabled |
+-------------------------------+----------------------+----------------------+
|   1  NVIDIA A100-SXM...  On   | 00000000:44:00.0 Off |                    0 |
| N/A   59C    P0   337W / 400W |   7040MiB / 40960MiB |     96%      Default |
|                               |                      |             Disabled |
+-------------------------------+----------------------+----------------------+
|   2  NVIDIA A100-SXM...  On   | 00000000:84:00.0 Off |                    0 |
| N/A   57C    P0   266W / 400W |   7358MiB / 40960MiB |     89%      Default |
|                               |                      |             Disabled |
+-------------------------------+----------------------+----------------------+
|   3  NVIDIA A100-SXM...  On   | 00000000:C4:00.0 Off |                    0 |
| N/A   56C    P0   271W / 400W |   7358MiB / 40960MiB |     89%      Default |
|                               |                      |             Disabled |
+-------------------------------+----------------------+----------------------+

You will find the four GPUs identified by ids starting at 0. In the second coloum, you can find the Bus-ID or identifier of the GPU. These are the values which have to be defined in the code example above. The mechanism in the background assumes that all nodes starting with this prefix have the same configuration and assignment of ID to bus ID. So if you have another configuration, you have to start a new prefix, only matching the hosts with this configuration.

node_regex

This option is unique to every cluster system. This regex describes the sytax of the hostnames which are used as computing resources in jobs. \ have to be escaped

Example: ^(n2(lcn|cn|fpga|gpu)[\\d{2,4}\\,\\-\\[\\]]+)+$

nodes

The "cores_per_socket" value is used within the transformation of the slurm data to ClusterCockpit data structure. CC uses rising ids to identify each core. Slurm seperates the cores by socket. So the scipts needs to know, how many cores per socket are available to calculate the cc representation of the allocated resources.

Running the script

Simply run slurm-clusercockpit-sync.py inside the same directory which contains the config.json file. A brief help is also available:

  • -c, --config You can use a different config file for testing or other purposes. Otherwise it would use config.json in the actual directory.
  • -j, --jobid In a test setup it might be useful to sync individual job ids instead of syncing all jobs.
  • -l, --limit Synchronize only this number of jobs in the respective direction. Stopping a job might take some short time. If a massive amount of jobs have to get stopped, the script might run a long time and miss new starting jobs if they start end end within the execution time of the script.
  • --direction Mostly a debug option. Only synchronize starting or stopping jobs. The default is both directions.

The script terminates after synchronization of all jobs.

Getting help

This script is to be seen as an example implementation and may have to be adapted for other installations. I tried to keep the script as general as possible and to catch some differences between clusters already. If adjustments are necessary, I am happy about pull requests or notification about that on other ways to get an implementation that runs on as many systems as possible without adjustments in the long run.

About

PC2 implementation of a sync script between slurm and ClusterCockpit

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 100.0%