ALUMINUM_SCRAP has different rate for output C__ALUMINUM_SCRAP (300.0 vs 360.0) -- 360 is correct
BLACK_POWDER_ALT_FINE_BLACK_POWDER has different rate for output C__COMPACTED_COAL (3.75 vs 3.8) -- 3.75 is correct
COMPUTER_ALT_CATERIUM_COMPUTER has different rate for output C__CIRCUIT_BOARD (26.25 vs 26.3) -- 26.25 is correct
COMPUTER_ALT_CRYSTAL_COMPUTER has different rate for output C__CRYSTAL_OSCILLATOR (2.8125 vs 2.8) -- 2.8125 is correct
COOLING_SYSTEM_ALT_COOLING_DEVICE has different rate for output C__HEAT_SINK (9.375 vs 9.4) -- 9.375 is correct
COOLING_SYSTEM_ALT_COOLING_DEVICE has different rate for output C__MOTOR (1.875 vs 1.9) -- 1.875 is correct
COPPER_POWDER was not defined before -- Introduced in update 4 https://satisfactory.fandom.com/wiki/Patch_0.4.0.0 is correct
CRYSTAL_OSCILLATOR_ALT_INSULATED_CRYSTAL_OSCILLATOR has different rate for output C__QUARTZ_CRYSTAL (18.75 vs 18.8) -- 18.75 is correct
CRYSTAL_OSCILLATOR_ALT_INSULATED_CRYSTAL_OSCILLATOR has different rate for output C__RUBBER (13.125 vs 13.1) -- 13.125 is correct
CRYSTAL_OSCILLATOR_ALT_INSULATED_CRYSTAL_OSCILLATOR has different rate for output C__AI_LIMITER (1.875 vs 1.9) -- 1.875 is correct
HEAVY_MODULAR_FRAME_ALT_HEAVY_ENCASED_FRAME has different rate for output C__ENCASED_INDUSTRIAL_BEAM (9.375 vs 9.4) -- 9.375 is correct
HEAVY_MODULAR_FRAME_ALT_HEAVY_ENCASED_FRAME has different rate for output C__STEEL_PIPE (33.75 vs 33.8) -- 33.75 is correct
HEAVY_MODULAR_FRAME_ALT_HEAVY_ENCASED_FRAME has different rate for output C__CONCRETE (20.625 vs 20.6) -- 20.625 is correct
HEAVY_MODULAR_FRAME_ALT_HEAVY_FLEXIBLE_FRAME has different rate for output C__MODULAR_FRAME (18.75 vs 18.8) -- 18.75 is correct
HEAVY_MODULAR_FRAME_ALT_HEAVY_FLEXIBLE_FRAME has different rate for output C__ENCASED_INDUSTRIAL_BEAM (11.25 vs 11.3) -- 11.25 is correct
HIGH_SPEED_CONNECTOR has different rate for output C__CIRCUIT_BOARD (3.75 vs 3.8) -- 3.75 is correct
MOTOR_ALT_ELECTRIC_MOTOR has different rate for output C__ELECTROMAGNETIC_CONTROL_ROD (7.5 vs 3.8) -- 3.75 is correct
MOTOR_ALT_RIGOUR_MOTOR has different rate for output C__ROTOR (3.75 vs 3.8) -- 3.75 is correct
MOTOR_ALT_RIGOUR_MOTOR has different rate for output C__STATOR (3.75 vs 3.8) -- 3.75 is correct
MOTOR_ALT_RIGOUR_MOTOR has different rate for output C__CRYSTAL_OSCILLATOR (1.25 vs 1.3) -- 1.25 is correct
NOBELISK_ALT_SEISMIC_NOBELISK has different rate for output C__CRYSTAL_OSCILLATOR (1.25 vs 1.5) -- 1.5 is correct
Missing input R__CRUDE_OIL in old enum -- I just have crude as a raw ingredient in my system i.e. no recipes is correct
Missing output C__HEAVY_OIL_RESIDUE in old enum (but both have same count; likely a duplicate error from me
POWER_SHARD was not defined before -- didn't feel this one was necessary, I never both automating these is correct
RADIO_CONTROL_UNIT has different rate for output C__CRYSTAL_OSCILLATOR (1.25 vs 1.3) -- 1.25 is correct
RADIO_CONTROL_UNIT has different rate for output C__COMPUTER (1.25 vs 1.3) -- 1.25 is correct
REINFORCED_IRON_PLATE_ALT_ADHERED_IRON_PLATE has different rate for output C__IRON_PLATE (11.25 vs 11.3) -- 11.25 is correct
REINFORCED_IRON_PLATE_ALT_ADHERED_IRON_PLATE has different rate for output C__RUBBER (3.75 vs 3.8) -- 3.75 is correct
REINFORCED_IRON_PLATE_ALT_STITCHED_IRON_PLATE has different rate for output C__IRON_PLATE (18.75 vs 18.8) -- 18.75 is correct
SILICA_ALT_CHEAP_SILICA has different rate for output R__RAW_QUARTZ (11.25 vs 11.3) -- 11.25 is correct
SILICA_ALT_CHEAP_SILICA has different rate for output R__LIMESTONE (18.75 vs 18.8) -- 18.75 is correct
Missing input C__STEEL_INGOT in old enum (but both have same count; likely a duplicate error from me
STEEL_INGOT_ALT_COMPACTED_STEEL_INGOT has different rate for output C__COMPACTED_COAL (11.25 vs 11.3) -- 11.25 is correct
SUPERCOMPUTER has different rate for output C__COMPUTER (3.75 vs 3.8) -- 3.75 is correct
SUPERCOMPUTER has different rate for output C__AI_LIMITER (3.75 vs 3.8) -- 3.75 is correct
SUPERCOMPUTER has different rate for output C__HIGH_SPEED_CONNECTOR (5.625 vs 5.6) -- 5.625 is correct
TURBO_MOTOR has different rate for output C__RADIO_CONTROL_UNIT (3.75 vs 3.8) -- 3.75 is correct
TURBO_MOTOR_ALT_TURBO_ELECTRIC_MOTOR has different rate for output C__MOTOR (6.5625 vs 6.6) -- 6.5625 is correct
TURBO_MOTOR_ALT_TURBO_ELECTRIC_MOTOR has different rate for output C__RADIO_CONTROL_UNIT (8.4375 vs 8.4) -- 8.4375 is correct
TURBO_MOTOR_ALT_TURBO_ELECTRIC_MOTOR has different rate for output C__ELECTROMAGNETIC_CONTROL_ROD (4.6875 vs 4.7) -- 4.6875 is correct
TURBO_MOTOR_ALT_TURBO_ELECTRIC_MOTOR has different rate for output C__ROTOR (6.5625 vs 6.6) -- 6.5625 is correct
TURBO_MOTOR_ALT_TURBO_PRESSURE_MOTOR has different rate for output C__PRESSURE_CONVERSION_CUBE (1.875 vs 1.9) -- 1.875 is correct