ADC121C021

ADC121C021 Analog to Digital Converter.

The ADC121C021 is a 1-Channel Analog to Digital Converter.

This Device is available from ControlEverything.com [SKU: ADC121C021_I2CADC]

https://www.controleverything.com/content/Analog-Digital-Converters?sku=ADC121C021_I2CADC

This Sample code can be used with Raspberry Pi, Arduino, Particle Photon, Beaglebone Black and Onion Omega.

Java

Download and install pi4j library on Raspberry pi. Steps to install pi4j are provided at:

http://pi4j.com/install.html

Download (or git pull) the code in pi.

Compile the java program.

$> pi4j ADC121C021.java

Run the java program.

$> pi4j ADC121C021

Python

Download and install smbus library on Raspberry pi. Steps to install smbus are provided at:

https://pypi.python.org/pypi/smbus-cffi/0.5.1

Download (or git pull) the code in pi. Run the program.

$> python ADC121C021.py

Arduino

Download and install Arduino Software (IDE) on your machine. Steps to install Arduino are provided at:

https://www.arduino.cc/en/Main/Software

Download (or git pull) the code and double click the file to run the program.

Compile and upload the code on Arduino IDE and see the output on Serial Monitor.

Particle Photon

Login to your Photon and setup your device according to steps provided at:

https://docs.particle.io/guide/getting-started/connect/photon/

Download (or git pull) the code. Go to online IDE and copy the code.

https://build.particle.io/build/

Verify and flash the code on your Photon. Code output is shown in logs at dashboard:

https://dashboard.particle.io/user/logs

##C

Download (or git pull) the code in Beaglebone Black.

Compile the c program.

$>gcc ADC121C021.c -o ADC121C021

Run the c program.

$>./ADC121C021

Onion Omega

Get Started and setting up the Onion Omega according to steps provided at :

https://wiki.onion.io/Get-Started

To install the Python module, run the following commands:

opkg update

opkg install python-light pyOnionI2C

Download (or git pull) the code in Onion Omega. Run the program.

$> python ADC121C021.py

ESP8266

Install the Boards Manager on your Arduino IDE. The Steps are provided at:

http://www.arduinesp.com/getting-started

Download (or git pull) the code and double click the file to run the program.

Compile and upload the code on Arduino IDE and see the output on Serial Monitor.

Copy the IP Address of your ESP8266 from Serial Monitor and paste it in your Web Browser to see the result on Web Server.

Note: Your system and ESP8266 should be connected to same Wi-Fi Network.

#####The code output is digital value of an analog input.