Skip to content

PS4 11.00 Auto PPPwn Jailbreak
Compare
Choose a tag to compare
@CrazeeGhost CrazeeGhost released this 09 May 18:17
· 1 commit to main since this release
v3.0-b1
5200c7f
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.

Instructions

PS4 Setup

  • Go to Settings and then Network
  • Select Set Up Internet connection and choose Use a LAN Cable
  • Choose Custom setup and choose PPPoE for IP Address Settings
  • Enter anything for PPPoE User ID and PPPoE Password
  • Choose Automatic for DNS Settings and MTU Settings
  • Choose Do Not Use for Proxy Server

Pi Setup

  1. Download and burn image onto a 2GB or larger micro SD card
  2. Insert the micro SD card into a Raspberry Pi and connect it to your PS4 via an Ethernet cable
  3. Download SiSTR0's GoldHEN
  4. Copy goldhen.bin to the root of an exFAT formatted USB drive
  5. Plug the USB Drive into a USB port on your PS4
  6. Power On the PS4 and the Raspberry Pi
  7. Wait for notifications confirming GoldHEN was loaded. This should happen within 5-20 minutes depending on how many attempts are required for that instance. If nothing happens within 20 minutes of boot up, I recommend restarting both the Raspberry Pi and the PS4.

Notes

  • This Jailbreak is for PS4 running software version 11.00 only
  • Tested on Raspberry Pi 3 Model B
  • After the first successful load of GoldHEN, you do not need to repeat steps 4 & 5 for subsequent runs on the same PS4
  • SSH username is pi and password is pppwn in case you need to access the Pi

Credits

Assets 3
Loading