Skip to content

PS4 9.00 & 11.00 PPPwn Auto Jailbreak
Compare
Choose a tag to compare
@CrazeeGhost CrazeeGhost released this 13 May 19:16
v4.0-b1
6af6103
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.

Changes

  • Using the C++ version of the PPPwn exploit
  • Added support for FW 9.00

Instructions

PS4 Setup

  • Go to Settings and then Network
  • Select Set Up Internet connection and choose Use a LAN Cable
  • Choose Custom setup and choose PPPoE for IP Address Settings
  • Enter anything for PPPoE User ID and PPPoE Password
  • Choose Automatic for DNS Settings and MTU Settings
  • Choose Do Not Use for Proxy Server

Pi Setup

  1. Download and burn image onto a 2GB or larger micro SD card
  2. If exploiting FW 9.00, navigate to the boot drive on the SD card and change contents of pppwn-cpp.txt to 900
  3. Insert the micro SD card into a Raspberry Pi and connect it to your PS4 via an Ethernet cable
  4. Download and extract SiSTR0's GoldHEN
  5. Copy goldhen.bin to the root of an exFAT formatted USB drive
  6. Plug the USB Drive into a USB port on your PS4
  7. Power On the PS4 and the Raspberry Pi
  8. Wait for notifications confirming GoldHEN was loaded. This should happen within 5 minutes depending on how many attempts are required for that instance. If nothing happens within 10 minutes of boot up, I recommend restarting both the Raspberry Pi and the PS4.

Notes

  • This Jailbreak is for PS4 running software versions 9.00 and 11.00 only
  • Tested on Raspberry Pi 3 Model B
  • After the first successful load of GoldHEN, you do not need to repeat steps 5 & 6 for subsequent runs on the same PS4

Credits

Assets 3
Loading