Skip to content

CyberCyclone/kubernetes-elasticsearch-cluster

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

kubernetes-elasticsearch-cluster

Elasticsearch 6.5.4 cluster on top of Kubernetes made easy.

These files are the project manifests and image generation files used on the article https://medium.com/@carlosedp/log-aggregation-with-elasticsearch-fluentd-and-kibana-stack-on-arm64-kubernetes-cluster-516fb64025f9.

The images in this project were built for the ARM64 and AMD64 platform. A hybrid cluster (Intel and ARM) can be created using these files.

Table of Contents

Abstract

Elasticsearch best-practices recommend to separate nodes in three roles:

  • Master nodes - intended for clustering management only, no data, no HTTP API
  • Client nodes - intended for client usage, no data, with HTTP API
  • Data nodes - intended for storing and indexing data, no HTTP API

This is the recommended way to deploy ElasticSearch in case your nodes are not CPU/Memory limited. The manifests on separate-roles show how to provision a production grade scenario consisting of 1 master, 1 client and 2 data nodes. The set of manifests in the root deploys a three-node ES cluster where all nodes perform all roles.

<a id="important-notes">

(Very) Important notes

  • Elasticsearch pods need for an init-container to run in privileged mode, so it can set some VM options. For that to happen, the kubelet should be running with args --allow-privileged, otherwise the init-container will fail to run.

  • By default, ES_JAVA_OPTS is set to -Xms512m -Xmx512m for the master node and -Xms1G -Xmx1G for the client and data nodes. This is a low value but possible to be used on ARM boards with 4GB of RAM. One can change this in the deployment descriptors available in this repository. In the full-role nodes, all nodes start with 1GB heap.

  • In this project,the pods use the Default StorageClass for storing data in each data node container. It could be adapted to other storage targets according to one's needs.

  • The all pods (master, data and ingest) are deployed as a StatefulSet. These use a volumeClaimTemplates to provision persistent storage for each pod.

  • By default, PROCESSORS is set to 1 with a limit of 3 CPUs. This may not be enough for some deployments, especially at startup time. Adjust resources.limits.cpu and/or livenessProbe accordingly if required. Note that resources.limits.cpu must be an integer.

<a id="pre-requisites">

Pre-requisites

  • Kubernetes cluster with (tested with v1.9.3 and 1.13.1 on-premises cluster).
  • kubectl configured to access the cluster master API Server
  • For curator jobs to be cleaned atomatically, the - --feature-gates=TTLAfterFinished=true feature gate should be enabled on the static manifests (/etc/kubernetes/manifests).

<a id="build-images">

Build images

The project uses images built for the ARM64 and AMD64 (x86) platform stored in my Dockerhub account. The images can be built in the images dir with the provided script or manually. As default, the images will be built by the script for the platform it's running on.

Deploy

Use the deploy script or follow it manually (these commands deploy the full stack).

You have two options, one deployng nodes with separate roles (master, client and data) or having all nodes with all roles. This can be uncommented on the deploy script or using the instruction below.

Create the namespace and cofiguration:

kubectl create namespace logging
alias kctl='kubectl --namespace logging'

kctl apply -f es-configmap.yaml

Or to have a three-node cluster with all roles, use this:

kctl apply -f es-full-svc.yaml
kctl apply -f es-full-statefulset.yaml

To have separate roles on each node, use this:

# Deploy Elasticsearch master node and wait until it's up
kctl apply -f ./separate-roles/es-master-svc.yaml
kctl apply -f ./separate-roles/es-master-statefulset.yaml
until kctl rollout status statefulset es-master  > /dev/null 2>&1; do sleep 1; printf "."; done

# Deploy Elasticsearch client node and wait until it's up
kctl apply -f ./separate-roles/es-ingest-svc.yaml
kctl apply -f ./separate-roles/es-ingest-statefulset.yaml
until kctl rollout status deployment es-client  > /dev/null 2>&1; do sleep 1; printf "."; done

# Deploy Elasticsearch data node and wait until it's up
kctl apply -f ./separate-roles/es-data-svc.yaml
kctl apply -f ./separate-roles/es-data-statefulset.yaml
until kctl rollout status statefulset es-data  > /dev/null 2>&1; do sleep 1; printf "."; done

This is common to any option:

# Deploy Curator
kctl apply -f es-curator-configmap.yaml
kctl apply -f es-curator-cronjob.yaml

# Deploy Cerebro
kctl apply -f cerebro.yaml
kctl apply -f cerebro-external-ingress.yaml

# Deploy Kibana
kctl apply -f kibana-configmap.yaml
kctl apply -f kibana-svc.yaml
kctl apply -f kibana-deployment.yaml
kctl apply -f kibana-external-ingress.yaml

# Deploy Fluentd
kctl apply -f fluentd-configmap.yaml
kctl apply -f fluentd-daemonset.yaml

Let's check if everything is working properly: Check one of the Elasticsearch master nodes logs:

$ kubectl get svc,deployment,statefulsets,pods -l component=elasticsearch
NAME                                     TYPE        CLUSTER-IP      EXTERNAL-IP   PORT(S)          AGE
service/elasticsearch                    NodePort    10.106.88.175   <none>        9200:30230/TCP   73m
service/elasticsearch-data-discovery     ClusterIP   None            <none>        9300/TCP         6h8m
service/elasticsearch-discovery          ClusterIP   None            <none>        9300/TCP         6h4m
service/elasticsearch-ingest-discovery   ClusterIP   None            <none>        9300/TCP         6h11m

NAME                         READY   AGE
statefulset.apps/es-data     2/2     102m
statefulset.apps/es-ingest   1/1     98m
statefulset.apps/es-master   1/1     6h50m

NAME              READY   STATUS    RESTARTS   AGE
pod/es-data-0     1/1     Running   0          59m
pod/es-data-1     1/1     Running   0          95m
pod/es-ingest-0   1/1     Running   0          98m
pod/es-master-0   1/1     Running   0          6h46m

Check one of the Elasticsearch master nodes logs:

$ kubectl logs po/es-master-6f6449b7f-jwbcb
chown: changing ownership of '/elasticsearch/config/elasticsearch.yml': Read-only file system
[2019-01-16T14:06:37,974][WARN ][o.e.c.l.LogConfigurator  ] [es-master-0] Some logging configurations have %marker but don't have %node_name. We will automatically add %node_name to the pattern to ease the migration for users who customize log4j2.properties but will stop this behavior in 7.0. You should manually replace `%node_name` with `[%node_name]%marker ` in these locations:
  /elasticsearch/config/log4j2.properties
[2019-01-16T14:06:42,312][INFO ][o.e.e.NodeEnvironment    ] [es-master-0] using [1] data paths, mounts [[/data (192.168.1.62:/data/kubernetes-storage/logging-elasticsearch-master-es-master-0-pvc-3f9d2bc1-1997-11e9-b14b-00e04c3bb2dc)]], net usable_space [821.8gb], net total_space [879.2gb], types [nfs4]
[2019-01-16T14:06:42,314][INFO ][o.e.e.NodeEnvironment    ] [es-master-0] heap size [494.9mb], compressed ordinary object pointers [true]
[2019-01-16T14:06:42,348][INFO ][o.e.n.Node               ] [es-master-0] node name [es-master-0], node ID [FZPGD1bqRbW105MYCBtnYw]
[2019-01-16T14:06:42,350][INFO ][o.e.n.Node               ] [es-master-0] version[6.5.4], pid[1], build[default/tar/d2ef93d/2018-12-17T21:17:40.758843Z], OS[Linux/4.4.138/aarch64], JVM[Oracle Corporation/OpenJDK 64-Bit Server VM/1.8.0_181/25.181-b13]
[2019-01-16T14:06:42,351][INFO ][o.e.n.Node               ] [es-master-0] JVM arguments [-XX:+UseConcMarkSweepGC, -XX:CMSInitiatingOccupancyFraction=75, -XX:+UseCMSInitiatingOccupancyOnly, -XX:+DisableExplicitGC, -XX:+AlwaysPreTouch, -Xss1m, -Djava.awt.headless=true, -Dfile.encoding=UTF-8, -Djna.nosys=true, -Djdk.io.permissionsUseCanonicalPath=true, -Dio.netty.noUnsafe=true, -Dio.netty.noKeySetOptimization=true, -Dlog4j.shutdownHookEnabled=false, -Dlog4j2.disable.jmx=true, -Dlog4j.skipJansi=true, -XX:+HeapDumpOnOutOfMemoryError, -Xms512m, -Xmx512m, -Des.path.home=/elasticsearch, -Des.path.conf=/elasticsearch/config, -Des.distribution.flavor=default, -Des.distribution.type=tar]
[2019-01-16T14:06:58,712][WARN ][o.e.d.c.s.Settings       ] [es-master-0] [http.enabled] setting was deprecated in Elasticsearch and will be removed in a future release! See the breaking changes documentation for the next major version.
[2019-01-16T14:07:22,304][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [aggs-matrix-stats]
[2019-01-16T14:07:22,305][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [analysis-common]
[2019-01-16T14:07:22,305][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [ingest-common]
[2019-01-16T14:07:22,305][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [lang-expression]
[2019-01-16T14:07:22,306][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [lang-mustache]
[2019-01-16T14:07:22,306][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [lang-painless]
[2019-01-16T14:07:22,306][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [mapper-extras]
[2019-01-16T14:07:22,306][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [parent-join]
[2019-01-16T14:07:22,306][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [percolator]
[2019-01-16T14:07:22,307][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [rank-eval]
[2019-01-16T14:07:22,307][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [reindex]
[2019-01-16T14:07:22,308][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [repository-url]
[2019-01-16T14:07:22,308][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [transport-netty4]
[2019-01-16T14:07:22,309][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [tribe]
[2019-01-16T14:07:22,309][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [x-pack-ccr]
[2019-01-16T14:07:22,309][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [x-pack-core]
[2019-01-16T14:07:22,310][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [x-pack-deprecation]
[2019-01-16T14:07:22,310][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [x-pack-graph]
[2019-01-16T14:07:22,311][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [x-pack-logstash]
[2019-01-16T14:07:22,311][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [x-pack-ml]
[2019-01-16T14:07:22,312][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [x-pack-monitoring]
[2019-01-16T14:07:22,312][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [x-pack-rollup]
[2019-01-16T14:07:22,312][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [x-pack-security]
[2019-01-16T14:07:22,313][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [x-pack-sql]
[2019-01-16T14:07:22,313][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [x-pack-upgrade]
[2019-01-16T14:07:22,313][INFO ][o.e.p.PluginsService     ] [es-master-0] loaded module [x-pack-watcher]
[2019-01-16T14:07:22,316][INFO ][o.e.p.PluginsService     ] [es-master-0] no plugins loaded
[2019-01-16T14:08:38,128][INFO ][o.e.x.s.a.s.FileRolesStore] [es-master-0] parsed [0] roles from file [/elasticsearch/config/roles.yml]
[2019-01-16T14:08:56,727][INFO ][o.e.d.DiscoveryModule    ] [es-master-0] using discovery type [zen] and host providers [settings]
[2019-01-16T14:09:04,910][INFO ][o.e.n.Node               ] [es-master-0] initialized
[2019-01-16T14:09:04,912][INFO ][o.e.n.Node               ] [es-master-0] starting ...
[2019-01-16T14:09:06,029][INFO ][o.e.t.TransportService   ] [es-master-0] publish_address {10.44.0.2:9300}, bound_addresses {10.44.0.2:9300}
[2019-01-16T14:09:06,210][INFO ][o.e.b.BootstrapChecks    ] [es-master-0] bound or publishing to a non-loopback address, enforcing bootstrap checks
[2019-01-16T14:09:09,707][INFO ][o.e.c.s.MasterService    ] [es-master-0] zen-disco-elected-as-master ([0] nodes joined), reason: new_master {es-master-0}{FZPGD1bqRbW105MYCBtnYw}{9cYQt93zRFyW5szy5vSkJA}{10.44.0.2}{10.44.0.2:9300}{xpack.installed=true}
[2019-01-16T14:09:09,738][INFO ][o.e.c.s.ClusterApplierService] [es-master-0] new_master {es-master-0}{FZPGD1bqRbW105MYCBtnYw}{9cYQt93zRFyW5szy5vSkJA}{10.44.0.2}{10.44.0.2:9300}{xpack.installed=true}, reason: apply cluster state (from master [master {es-master-0}{FZPGD1bqRbW105MYCBtnYw}{9cYQt93zRFyW5szy5vSkJA}{10.44.0.2}{10.44.0.2:9300}{xpack.installed=true} committed version [1] source [zen-disco-elected-as-master ([0] nodes joined)]])
[2019-01-16T14:09:09,805][INFO ][o.e.n.Node               ] [es-master-0] started

As we can assert, the cluster is up and running. Easy, wasn't it?

Access the service

Don't forget that services in Kubernetes are only acessible from containers in the cluster. For different behavior one should configure the creation of an external load-balancer or use an ingress as currently included in the project.

Note: if you are using one of the cloud providers which support external load balancers, setting the type field to "LoadBalancer" will provision a load balancer for your Service. You can add the field in es-ingest-svc.yaml.

$ kubectl get svc elasticsearch
NAME            TYPE        CLUSTER-IP      EXTERNAL-IP   PORT(S)    AGE
elasticsearch   ClusterIP   10.100.220.56   <none>        9200/TCP   3m

From any host on the Kubernetes cluster (that's running kube-proxy or similar), run:

$ curl http://10.100.220.56:9200

One should see something similar to the following:

{
  "name" : "es-ingest-0",
  "cluster_name" : "myesdb",
  "cluster_uuid" : "y_wU9c5rRZKqRF8jlxKJMg",
  "version" : {
    "number" : "6.5.4",
    "build_flavor" : "default",
    "build_type" : "tar",
    "build_hash" : "d2ef93d",
    "build_date" : "2018-12-17T21:17:40.758843Z",
    "build_snapshot" : false,
    "lucene_version" : "7.5.0",
    "minimum_wire_compatibility_version" : "5.6.0",
    "minimum_index_compatibility_version" : "5.0.0"
  },
  "tagline" : "You Know, for Search"
}

Or if one wants to see cluster information:

$ curl http://10.100.220.56:9200/_cluster/health?pretty

One should see something similar to the following:

{
  "cluster_name" : "myesdb",
  "status" : "green",
  "timed_out" : false,
  "number_of_nodes" : 4,
  "number_of_data_nodes" : 2,
  "active_primary_shards" : 70,
  "active_shards" : 138,
  "relocating_shards" : 0,
  "initializing_shards" : 0,
  "unassigned_shards" : 0,
  "delayed_unassigned_shards" : 0,
  "number_of_pending_tasks" : 0,
  "number_of_in_flight_fetch" : 0,
  "task_max_waiting_in_queue_millis" : 0,
  "active_shards_percent_as_number" : 100.0
}

One of the main advantages of running Elasticsearch on top of Kubernetes is how resilient the cluster becomes, particularly during node restarts. However if all data pods are scheduled onto the same node(s), this advantage decreases significantly and may even result in no data pods being available.

It is then highly recommended, in the context of the solution described in this repository, that one adopts pod anti-affinity in order to guarantee that two data pods will never run on the same node.

Here's an example:

spec:
  affinity:
    podAntiAffinity:
      preferredDuringSchedulingIgnoredDuringExecution:
      - weight: 100
        podAffinityTerm:
          labelSelector:
            matchExpressions:
            - key: component
              operator: In
              values:
              - elasticsearch
            - key: role
              operator: In
              values:
              - data
          topologyKey: kubernetes.io/hostname
  containers:
  - (...)

If one wants to ensure that no more than n Elasticsearch nodes will be unavailable at a time, one can optionally (change and) apply the following manifests:

kubectl create -f pdb/es-master-pdb.yaml
kubectl create -f pdb/es-data-pdb.yaml

Note: This is an advanced subject and one should only put it in practice if one understands clearly what it means both in the Kubernetes and Elasticsearch contexts. For more information, please consult Pod Disruptions.

The image used in this repo is standard. However, one can install additional plug-ins at will by simply specifying the ES_PLUGINS_INSTALL environment variable in the desired pod descriptors. For instance, to install Google Cloud Storage and S3 plug-ins it would be like follows:

- name: "ES_PLUGINS_INSTALL"
  value: "repository-gcs,repository-s3"

This is not tested in current image, please report on Issues any errors or successes.

Additionally, one can run a CronJob that will periodically run Curator to clean up indices (or do other actions on the Elasticsearch cluster).

kubectl create -f es-curator-config.yaml
kubectl create -f es-curator_v1beta1.yaml

Please, confirm the job has been created.

$ kubectl get cronjobs
NAME      SCHEDULE    SUSPEND   ACTIVE    LAST-SCHEDULE
curator   1 0 * * *   False     0         <none>

The job is configured to run once a day at 1 minute past midnight and delete indices that are older than 30 days.

Notes

  • One can change the schedule by editing the cron notation in es-curator-cronjob.yaml.
  • One can change the action (e.g. delete older than 3 days) by editing the es-curator-configmap.yaml.
  • The definition of the action_file.yaml is quite self-explaining for simple set-ups. For more advanced configuration options, please consult the Curator Documentation.

If one wants to remove the curator job, just run:

kubectl delete cronjob curator
kubectl delete configmap curator-config

Kibana will be available through service kibana, and one will be able to access it from within the cluster or proxy it through the Kubernetes API Server, as follows:

There is also an Ingress to expose the service publicly or simply use the service nodeport. In the case one proceeds to do so, one must change the environment variable SERVER_BASEPATH to the match their environment.

FAQ

Why does NUMBER_OF_MASTERS differ from number of master-replicas?

The default value for this environment variable is 2, meaning a cluster will need a minimum of 2 master nodes to operate. If a cluster has 3 masters and one dies, the cluster still works. Minimum master nodes are usually n/2 + 1, where n is the number of master nodes in a cluster. If a cluster has 5 master nodes, one should have a minimum of 3, less than that and the cluster stops. If one scales the number of masters, make sure to update the minimum number of master nodes through the Elasticsearch API as setting environment variable will only work on cluster setup. More info: https://www.elastic.co/guide/en/elasticsearch/guide/1.x/_important_configuration_changes.html#_minimum_master_nodes

How can I customize elasticsearch.yaml?

Read a different config file by settings env var ES_PATH_CONF=/path/to/my/config/ (see the Elasticsearch docs for more) or edit the provided ConfigMap in file es-configmap.yaml.

Troubleshooting

No up-and-running site-local

One of the errors one may come across when running the setup is the following error:

[2016-11-29T01:28:36,515][WARN ][o.e.b.ElasticsearchUncaughtExceptionHandler] [] uncaught exception in thread [main]
org.elasticsearch.bootstrap.StartupException: java.lang.IllegalArgumentException: No up-and-running site-local (private) addresses found, got [name:lo (lo), name:eth0 (eth0)]
	at org.elasticsearch.bootstrap.Elasticsearch.init(Elasticsearch.java:116) ~[elasticsearch-5.0.1.jar:5.0.1]
	at org.elasticsearch.bootstrap.Elasticsearch.execute(Elasticsearch.java:103) ~[elasticsearch-5.0.1.jar:5.0.1]
	at org.elasticsearch.cli.SettingCommand.execute(SettingCommand.java:54) ~[elasticsearch-5.0.1.jar:5.0.1]
	at org.elasticsearch.cli.Command.mainWithoutErrorHandling(Command.java:96) ~[elasticsearch-5.0.1.jar:5.0.1]
	at org.elasticsearch.cli.Command.main(Command.java:62) ~[elasticsearch-5.0.1.jar:5.0.1]
	at org.elasticsearch.bootstrap.Elasticsearch.main(Elasticsearch.java:80) ~[elasticsearch-5.0.1.jar:5.0.1]
	at org.elasticsearch.bootstrap.Elasticsearch.main(Elasticsearch.java:73) ~[elasticsearch-5.0.1.jar:5.0.1]
Caused by: java.lang.IllegalArgumentException: No up-and-running site-local (private) addresses found, got [name:lo (lo), name:eth0 (eth0)]
	at org.elasticsearch.common.network.NetworkUtils.getSiteLocalAddresses(NetworkUtils.java:187) ~[elasticsearch-5.0.1.jar:5.0.1]
	at org.elasticsearch.common.network.NetworkService.resolveInternal(NetworkService.java:246) ~[elasticsearch-5.0.1.jar:5.0.1]
 	at org.elasticsearch.common.network.NetworkService.resolveInetAddresses(NetworkService.java:220) ~[elasticsearch-5.0.1.jar:5.0.1]
 	at org.elasticsearch.common.network.NetworkService.resolveBindHostAddresses(NetworkService.java:130) ~[elasticsearch-5.0.1.jar:5.0.1]
 	at org.elasticsearch.transport.TcpTransport.bindServer(TcpTransport.java:575) ~[elasticsearch-5.0.1.jar:5.0.1]
 	at org.elasticsearch.transport.netty4.Netty4Transport.doStart(Netty4Transport.java:182) ~[?:?]
 	at org.elasticsearch.common.component.AbstractLifecycleComponent.start(AbstractLifecycleComponent.java:68) ~[elasticsearch-5.0.1.jar:5.0.1]
 	at org.elasticsearch.transport.TransportService.doStart(TransportService.java:182) ~[elasticsearch-5.0.1.jar:5.0.1]
 	at org.elasticsearch.common.component.AbstractLifecycleComponent.start(AbstractLifecycleComponent.java:68) ~[elasticsearch-5.0.1.jar:5.0.1]
 	at org.elasticsearch.node.Node.start(Node.java:525) ~[elasticsearch-5.0.1.jar:5.0.1]
 	at org.elasticsearch.bootstrap.Bootstrap.start(Bootstrap.java:211) ~[elasticsearch-5.0.1.jar:5.0.1]
 	at org.elasticsearch.bootstrap.Bootstrap.init(Bootstrap.java:288) ~[elasticsearch-5.0.1.jar:5.0.1]
 	at org.elasticsearch.bootstrap.Elasticsearch.init(Elasticsearch.java:112) ~[elasticsearch-5.0.1.jar:5.0.1]
 	... 6 more
[2016-11-29T01:28:37,448][INFO ][o.e.n.Node               ] [kIEYQSE] stopping ...
[2016-11-29T01:28:37,451][INFO ][o.e.n.Node               ] [kIEYQSE] stopped
[2016-11-29T01:28:37,452][INFO ][o.e.n.Node               ] [kIEYQSE] closing ...
[2016-11-29T01:28:37,464][INFO ][o.e.n.Node               ] [kIEYQSE] closed

This is related to how the container binds to network ports (defaults to _local_). It will need to match the actual node network interface name, which depends on what OS and infrastructure provider one uses. For instance, if the primary interface on the node is p1p1 then that is the value that needs to be set for the NETWORK_HOST environment variable. Please see the documentation for reference of options.

In order to workaround this, set NETWORK_HOST environment variable in the pod descriptors as follows:

- name: "NETWORK_HOST"
  value: "_eth0_" #_p1p1_ if interface name is p1p1, _ens4_ if interface name is ens4, and so on.

(IPv6) org.elasticsearch.bootstrap.StartupException: BindTransportException

Intermittent failures occur when the local network interface has both IPv4 and IPv6 addresses, and Elasticsearch tries to bind to the IPv6 address first. If the IPv4 address is chosen first, Elasticsearch starts correctly.

In order to workaround this, set NETWORK_HOST environment variable in the pod descriptors as follows:

- name: "NETWORK_HOST"
  value: "_eth0:ipv4_" #_p1p1:ipv4_ if interface name is p1p1, _ens4:ipv4_ if interface name is ens4, and so on.

About

Elasticsearch cluster on top of Kubernetes for ARM64 and x64 platforms

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Shell 57.4%
  • Dockerfile 38.3%
  • Makefile 2.9%
  • Ruby 1.4%