DeMiSTified board ports from original MiSTer core by Pierco (Pierre Cornier) https://github.com/MiSTer-devel/TatungEinstein_MiSTer/
More info about Demistify on deca folder.
Follows original readme content.
This is the port of the Tatung Einstein TC01 for MiSTer FPGA by Pierco (Pierre Cornier).
Insert a DSK file then press CTRL+TAB to load it. Use the DIR command to list the files if it's not a bootable disk. If you want to run a COM file, just type the name without the extension and press the [ENTER] key. For XBS basic files, you will need to load the XBasic first (insert the disk and type XBAS), then load your XBS file with LOAD "filename" and type RUN.
I want to thank Stan Hodge and Alan Steremberg for their help! And I would also like to thank Fabrizio Di Vittorio for allowing me to include his diagnostic ROM with the core. You can enable it in OSD.
https://github.com/fdivitto/TatungEinsteinDiagnosticFirmware
The diagnostic ROM will fail at the floppy disc controller.
- PIO connected to port M001 for printer.
- PCI for serial communication.