Skip to content

Running with Kubernetes

Jump to bottom
Pierre Lasorak edited this page May 22, 2023 · 3 revisions

New instructions soon

The places for testing is here: https://docs.google.com/spreadsheets/d/15vliuqYNvufHopZXSUW8jl8Ki8yDupwpy44ao3ZOWAE/edit?usp=sharing

Old instructions

Clone the np04daq-configs and checkout feature/k8s,

git clone ssh://git@gitlab.cern.ch:7999/dune-daq/online/np04daq-configs.git # this needs to to be updated to a new place
cd np04daq-configs 
git checkout feature/k8s

This branch uses a special image in the configuration (np04docker.cern.ch/dunedaq-local/k8s-v400-rc3:rc-v4.0.0-3-01) which has Eric’s modifications to IPM. Other modifications are:

  • Removing the cern.ch postfix from the hostname
  • Setting the parameter start_connectivity_service to false
  • Adding a use_k8s = true and the name of the image as described above

Run the daq-config bash script:

./recreate_np04_daq_configurations.sh

Upload the new nanorc configuration of your choice

upload-conf [np04_daq_APA_conf] [flx-k8s-test]

Here are some examples of [np04_daq_APA_conf]'s that you can upload:

  • np02_coldbox_daq_100mHz_conf/
  • np02_coldbox_daq_268ms_conf/
  • np02_coldbox_daq_5Hz/
  • np02_coldbox_daq_conf/
  • np02_coldbox_daq_hma_conf/
  • np02_coldbox_daq_tp_conf/
  • np02_coldbox_flxcard_conf/
  • np02_coldbox_flxcard_WIB12_conf/
  • np02_coldbox_flxcard_WIB34_conf/
  • np02_coldbox_flxcard_WIB56_conf/
  • np02_coldbox_timing_tlu_conf/
  • np02_coldbox_wib_conf/
  • np02_coldbox_wib_pulser_conf/
  • np02_coldbox_wib_WIB12_conf/
  • np02_coldbox_wib_WIB34_conf/
  • np02_coldbox_wib_WIB56_conf/
  • np04_daq_APA1_conf/
  • np04_daq_APA1_tp_conf/
  • np04_daq_APA2_conf/
  • np04_daq_APA2_tp_conf/
  • np04_daq_APA3_conf/
  • np04_daq_APA4_conf/
  • np04_daq_conf/
  • np04_daq_DAPHNE_conf/
  • np04_daq_DAPHNE_test_conf/
  • np04_daq_TPC_conf/
  • np04_flxcard_APA1_conf/
  • np04_flxcard_APA2_conf/
  • np04_flxcard_APA3_conf/
  • np04_flxcard_APA4_conf/
  • np04_flxcard_conf/
  • np04_flxcard_TPC_conf/

For this to work you need to be able to use kubectl which can be is done by,

export KUBECONFIG=/nfs/home/np04daq/np04-kubernetes/config

Remember to inform np04_shifterassistant on slack that you are taking one of the APA’s for a spin and make sure no one else is running anything on it first.

Now you can run the nanorc using the following command:

nanorc --pm k8s://np04-srv-015:31000 db://[flx-k8s-test] [yourname-flx-k8s-test-run]
Clone this wiki locally