amdgpu-simple-settings-tool

Original creator DominiLux

Project extended: Sysdrum

New features: DarkJarris

License: Apache Version 2.0

This is now a beta release written in unix style bash script. It is a simple utility that allows you to set the fan speeds and check thermals for AMD cards that supports both the AMDGPU open and AMD GPU PRO driver.

Stable Branch

The current master branch is the stable release.

Installation Instructions:

• sudo apt-get install git
• git clone https://github.com/sysdrum/amdgpu-simple-settings-tool
• cd amdgpu-pro-fans
• Run ./create_desktop_file.sh
• If you move amdgpu-pro-fans just Run the ./create_desktop_file again to update everything.

Dependencies:

• dialog - is required to for the menu to work.

Adjusting the MENU Example:

• Menu has default settings of 40/60/80/100
• | ./amdgpu-pro-fans.sh -s 80 |
• That would set all of your fan speeds to 80 percent of their maximum speed.
• You can edit fanspeeddlg-promenu.sh and update the ranges.
• At anytime you can run ./create_desktop_file.sh to reset the changes to default.

Automatic Control

The bash file AutomaticFanSet.sh will lopp every 5 seconds, and get a amdgpu-pro-fans output of your current fans temperature, add a modifier, and feed it right back into amdgpu-pro-fans as a fan speed percentage.

When run on startup, it will automatically raise and lower your fan speeds, even on GPUs where the automatic fan controller is not working.

CLI Usages:

sudo ./amdgpu-pro-fans.sh -s [speed 0 - 100]
./amdgpu-pro-fans.sh -t
./amdgpu-pro-fans.sh -r
./amdgpu-pro-fans.sh -h
./amdgpu-pro-fans.sh -v [0,1] (default 1)

Examples

sudo ./amdgpu-pro-fans.sh -s 80
This would set all of your fan speeds to 80 percent of their maximum speed.

./amdgpu-pro-fans.sh -t
This will show the current temperature in Centigrade.

./amdgpu-pro-fans.sh -r
This will show current fan speed percentage.

./amdgpu-pro-fans.sh -h
This shows the help feature

./amdgpu-pro-fans.sh -v
This sets verbosity. 0 is simple output, 1 is verbose output. default is 1.

If you wish to change verbosity to 0, use the flag before asking for output, examples given:
./amdgpu-pro-fans.sh -v 1 -r
Fan speed on Card0 is 100%

./amdgpu-pro-fans.sh -v 0 -r
100

./amdgpu-pro-fans.sh -v 1 -a 0 -r
Fan speed on Card0 is 100%

./amdgpu-pro-fans.sh -v 0 -a 0 -r
100

./amdgpu-pro-fans.sh -t -v 0
$0: invalid option -- ' '
$0: invalid option -- '-'
Temperature on Card0 is 51%

./amdgpu-pro-fans.sh -t -v 0 -a 0
$0: invalid option -- ' '
$0: invalid option -- '-'
Temperature on Card0 is 51%

By using these features, it is possible to make a GUI front-end that can run this script and interpret the answers. If writing a GUI, set verbosity to 0 on your calls to get simple answers back you can check against.

Notes:

AMD Product Family Compatibility
AMD Radeon™ VII Graphics​	AMD Radeon™ Pro WX-series​
AMD Radeon™ RX Vega Series Graphics​	AMD Radeon™ Pro WX 9100​
AMD Radeon™ Vega Frontier Edition	AMD Radeon™ Pro WX 8200
AMD Radeon™ RX 550/560/570/580/590 Series Graphics	AMD FirePro™ W9100
AMD Radeon™ RX 460/470/480 Graphics	AMD FirePro™ W8100​
AMD Radeon™ Pro Duo	​​AMD FirePro™ W7100
AMD Radeon™ R9 Fury/Fury X/Nano Graphics	AMD FirePro™ W5100
AMD Radeon™ R9 380/380X/390/390X Graphics	AMD FirePro™ W4300
AMD Radeon™ R9 285/290/290X Graphics	AMD FirePro™ W4100
AMD Radeon™ R7 240/250/250X/260/260X/350	AMD FirePro™ W2100​
AMD Radeon™ HD7700/7800/8500/8600	​AMD FirePro™ W600
​AMD Radeon™ R9 360 Graphics	AMD FirePro™ S-Series
​AMD Radeon™ R5 340	​​

Orignal project:

https://github.com/DominiLux/amdgpu-pro-fans
Dev replaced the project with:
https://github.com/DominiLux/GPUMAGIC