IPEM Serial Monitor Example

DitroniX IPEM-1 ATM90E32 ATM90E36 IoT Power Energy Monitor Board - Development Code

Attempting to connect to TestAP ... Connected to TestAP

Connection Details:

• WiFi SSID TestAP (Wifi Station Mode)
• WiFi IP 192.168.1.61 (Static)
• WiFi MASK 255.255.255.0
• WiFi GW 192.168.1.1
• WiFi DNS 1 192.168.1.1
• WiFi DNS 2 8.8.4.4
• WiFi MAC 16:3A:8D:16:9A:08
• WiFi Hostname IPEM-9A08
• WiFi RSSI -78 dBm (Signal Good)

Initialise WebServer

• HTTP Web Server Started
• Webpage can be found http://192.168.1.61

Register Status and Startup Report

• IPEM-1 ATM90E32 ATM90E36 IoT Power Energy Monitor
• ESP32 Serial ID: 089A858D3A08 Firmware Version: 230522
• Board Location: House

Wi-Fi is Enabled

Domoticz Publishing is Disabled

EEPROM Check: 20 (Validation OK)

Peripherals Test

• Testing RGB LED
• Scanning I2C Bus for Devices ...
  • I2C device found at address Decimal 60 = Hex 0x3C OLED
  • I2C device found at address Decimal 80 = Hex 0x50 EEPROM
  • I2C Bus Scan Complete

AC/DC Voltage Input Detected

Connecting to the ATM90E32

ATM90E32 Connected - OK

IPEM Hardware Setup and Power-Up Test - Board Initialized

Mains RMS Voltage

• Voltage 1: 246.15 V (Single Line Voltage Selected)

Mains RMS Current

• Current CT1: 1.29 A
• Current CT2: 1.29 A
• Current CT3: 1.29 A
• Actual Total Current: 3.87 A (CT1CT2CT3)

Calculated RMS Power

• Power V1*I1: 317.53 W
• Power V1*I2: 317.53 W
• Power V1*I3: 317.53 W
• Calculated Total Power: 957.19 W (CT1CT2CT3)

Active Power (Absorbed or Used by the Load)

• Active Power CT1: 315.52 W (Import)
• Active Power CT2: 318.92 W (Import)
• Active Power CT3: 320.92 W (Import)
• Total Active Power: 636.44 W (Import)
• Calculated Total Active Power: 955.36 W (CT1CT2CT3)

Re-Active Power

• ReActive Power CT1: 18.95 VAR
• ReActive Power CT2: 18.35 VAR
• ReActive Power CT3: 19.07 VAR
• Total ReActive Power: 38.00 VAR (CT1CT2CT3)
• Calculated Total Reactive Power: 56.37 W (CT1CT2CT3)

Apparent Power (Total Amount of Power Flowing from Source to Load)

• Apparent Power CT1: 316.15 VA
• Apparent Power CT2: 319.50 VA
• Apparent Power CT3: 321.38 VA
• Total Apparent Power: 637.60 VA (CT1CT2CT3)
• Calculated Total Apparent Power: 957.03 W (CT1CT2CT3)

Other Power Information

• Total Fundamental Power: 635.67 pH(t)
• Total Harmonic Power: 0.95

Power Factor

• Power Factor CT1: 1.00 PF
• Power Factor CT2: 1.00 PF
• Power Factor CT3: 1.00 PF
• Total Power Factor: 1.00 PF

Phase Angle

• Phase Angle CT1: 3.40
• Phase Angle CT2: 3.20
• Phase Angle CT3: 3.30

Other Information

• Chip Temperature: 27.00 °C
• Mains Frequency: 49.98 Hz
• PCB Temperature Sensor (NTC_IN VN): 24.60 ºC
• ADC Raw: 2673 > ADC Adjusted: 2673 > Calculated: 25.46 V