This site will take you through all resources available in this repo. If you haven't read the main page I would strongly recomend to do so before getting these files 3d printed etc. Reason is your case may have a different dimensions which potentially may force you to tweak the CAD files to adapt them to your usecase.
NOTE: Files without FreeCAD version are not built by me personally. These files will not be stored in this repo because the license upon which these files are published must not be simply overwritten. An author and license info will be provided in Additional information column while stl links will take you to the original source of file.
| Element view | Section | STL file | FreeCAD file | Additional information |
|---|---|---|---|---|
 |
Power Supply |  |
 |
Main mount for Mean Well RS-25-5 power supply - 5V/5A/25W. |
 |
Power Supply | |
|
An element of PS mount to prevent movement inside the case. |
 |
Power Supply | |
|
A small element that should be glued on top of connection slot to provide stabilization. |
 |
A500 case rear | |
|
Provides a mount for ethernet, power fuse, power switch, 2x HDMI female connectors and power connector. |
 |
A500 case rear | |
n/a | 🚩 External resource Provides a mount for 2x USB ports. You need to cut off "audio" part to allow audio composite ports usage. This part is built by: Matthew Martin (aka mattsoft) and is licensed under the Creative Commons - Attribution license. |
 |
Raspberry Pi | |
n/a | 🚩 External resource This element will allow to mount RPi inside the case with where it's SD card slot is easly accessable via side trapdoor This part is built by: Matthew Martin (aka mattsoft) and is licensed under the Creative Commons - Attribution license. |
 |
Keyboard converter | |
n/a | 🚩 External resource A mount for Amiga 500 USB Keyboard Controller. This part is built by: Matthew Martin (aka mattsoft) and is licensed under the Creative Commons - Attribution license. |
 |
Keyboard converter | |
n/a | 🚩 External resource Adapters/covers which may be usable to keep mounts in place. This part is built by: Matthew Martin (aka mattsoft) and is licensed under the Creative Commons - Attribution license. |
 |
Floppy drive | |
|
Left mount for floppy drive. May need tweaking to adapt to other manufacturers. Suitable for ALPS floppy drive. |
 |
Floppy drive | |
|
Right mount for floppy drive. May need tweaking to adapt to other manufacturers. Suitable for ALPS floppy drive. |
 |
Floppy drive | |
|
Element that connects both sides of floppy mount. Suitable for ALPS floppy drive. |
 |
Floppy drive | |
|
Support for floppy mount. Build 1 unit of it. Suitable for ALPS floppy drive. |
 |
Floppy drive | |
|
Support for floppy mount. Build 2 units of it. Suitable for ALPS floppy drive. |
| work in progress |