Skip to content

Latest commit

 

History

History
 
 

ST_STM32F769I_DISCOVERY

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
common
common
 
 
managed_helpers
managed_helpers
 
 
nanoBooter
nanoBooter
 
 
nanoCLR
nanoCLR
 
 
CMakeLists.txt
CMakeLists.txt
 
 
CMakePresets.json
CMakePresets.json
 
 
README.md
README.md
 
 
board.c
board.c
 
 
board.h
board.h
 
 
ffconf.h
ffconf.h
 
 
launch.json
launch.json
 
 
mbedtls_config.h
mbedtls_config.h
 
 
stm32f7xx_hal_conf.h
stm32f7xx_hal_conf.h
 
 
target_BlockStorage.c
target_BlockStorage.c
 
 
target_BlockStorage.h
target_BlockStorage.h
 
 
target_common.c
target_common.c
 
 
target_common.h.in
target_common.h.in
 
 
target_external_memory.c
target_external_memory.c
 
 
target_lwip_sntp_opts.h
target_lwip_sntp_opts.h
 
 
target_lwipopts.h
target_lwipopts.h
 
 
target_nf_dev_onewire_config.cpp
target_nf_dev_onewire_config.cpp
 
 
target_nf_dev_onewire_config.h
target_nf_dev_onewire_config.h
 
 
target_nf_device_can_config.cpp
target_nf_device_can_config.cpp
 
 
target_nf_device_can_config.h
target_nf_device_can_config.h
 
 
target_system_device_adc_config.cpp
target_system_device_adc_config.cpp
 
 
target_system_device_dac_config.cpp
target_system_device_dac_config.cpp
 
 
target_system_device_i2c_config.cpp
target_system_device_i2c_config.cpp
 
 
target_system_device_pwm_config.cpp
target_system_device_pwm_config.cpp
 
 
target_system_device_spi_config.cpp
target_system_device_spi_config.cpp
 
 
target_system_io_ports_config.cpp
target_system_io_ports_config.cpp
 
 
target_system_io_ports_config.h
target_system_io_ports_config.h
 
 
target_windows_storage_config.h
target_windows_storage_config.h
 
 

README.md

Configuration of ChibiOS, HAL and MCU

For a successful build the following changes are required:

For memory maps, uuid etc. the reference document used was: http://www.st.com/content/ccc/resource/technical/document/reference_manual/group0/96/8b/0d/ec/16/22/43/71/DM00224583/files/DM00224583.pdf/jcr:content/translations/en.DM00224583.pdf

In halconf.g (in both nanoBooter and nanoCLR folders), when compared with a default file available from (https://github.com/ChibiOS/ChibiOS/tree/master/demos/STM32/RT-STM32F769I-DISCOVERY):

  • HAL_USE_SERIAL to TRUE
  • SERIAL_DEFAULT_BITRATE to 921600

In mcuconf.h (in both nanoBooter and nanoCLR folders), when compared with a default file available from (https://github.com/ChibiOS/ChibiOS/tree/master/demos/STM32/RT-STM32F769I-DISCOVERY):

  • STM32_SERIAL_USE_USART1 to TRUE

NOTE: this configuration was successfully tested in an ST_STM32F769I_DISCOVERY board using the Serial port through the onboard ST Link USB connection.

ADC configurations

The following ADC channels (and respective GPIO pins) are available to the managed API, in the respective index:

  • PA6, ADC1 IN6
  • PA4 ADC1 IN4
  • PC2 ADC1 IN12
  • PF10 ADC1 IN8
  • PF8 ADC3 IN6
  • PB8 ADC3 IN7
  • Temp Sensor ADC1
  • VrefInt ADC1
  • Vbatt ADC1

Floating point

The current build is set to add support for single-precision floating point. Meaning that System.Math API supports only the float overloads. The double ones will throw a NotImplementedException.