The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions uses Node.js version which is deprecated and will be forced to run on node20: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

warning: doc list item missing indentation --> src/command/wifi/types.rs:740:9 | 740 | /// be done by the Wi-Fi disable/enable command (parameter | ^^^^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 740 | /// be done by the Wi-Fi disable/enable command (parameter | ++

warning: doc list item missing indentation --> src/command/wifi/types.rs:739:9 | 739 | /// settings to take affect, the Wi-Fi radio must be restarted. This can | ^^^^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 739 | /// settings to take affect, the Wi-Fi radio must be restarted. This can | ++

warning: doc list item missing indentation --> src/command/wifi/types.rs:627:9 | 627 | /// are enabled. Supported software versions 7.0.0 onwards | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 627 | /// are enabled. Supported software versions 7.0.0 onwards | ++

warning: doc list item missing indentation --> src/command/wifi/types.rs:583:9 | 583 | /// be done by the Wi-Fi disable/enable command (parameter | ^^^^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 583 | /// be done by the Wi-Fi disable/enable command (parameter | ++

warning: doc list item missing indentation --> src/command/wifi/types.rs:582:9 | 582 | /// settings to take affect, the Wi-Fi radio must be restarted. This can | ^^^^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 582 | /// settings to take affect, the Wi-Fi radio must be restarted. This can | ++

warning: doc list item missing indentation --> src/command/ping/mod.rs:26:5 | 26 | /// in another way. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 26 | /// in another way. | ++

warning: doc list item missing indentation --> src/command/ping/mod.rs:25:5 | 25 | /// OBS: If a remote host does not reply to an ICMP echo request, it does not mean that the host cannot be reached | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 25 | /// OBS: If a remote host does not reply to an ICMP echo request, it does not mean that the host cannot be reached | ++

warning: doc list item missing indentation --> src/command/ping/mod.rs:24:5 | 24 | /// OBS: Some remote hosts might not reply to the ICMP echo request if the data size of the echo request is too big. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 24 | /// OBS: Some remote hosts might not reply to the ICMP echo request if the data size of the echo request is too big. | ++

warning: doc list item missing indentation --> src/command/ping/mod.rs:23:5 | 23 | /// settings). | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 23 | /// settings). | ++

warning: doc list item missing indentation --> src/command/ping/mod.rs:22:5 | 22 | /// OBS: Some remote hosts might not reply to the ICMP echo request for security reasons (for example, firewall | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 22 | /// OBS: Some remote hosts might not reply to the ICMP echo request for security reasons (for example, firewall | ++

warning: doc list item missing indentation --> src/command/ping/mod.rs:21:5 | 21 | /// result (when there is no error). | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 21 | /// result (when there is no error). | ++

warning: doc list item missing indentation --> src/command/ping/mod.rs:20:5 | 20 | /// of the ping command execution is notified through the +UUPING: URC, which reports the +UPING command | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 20 | /// of the ping command execution is notified through the +UUPING: URC, which reports the +UPING command | ++

warning: doc list item missing indentation --> src/command/ping/mod.rs:19:5 | 19 | /// The AT+UPING allows the user to execute a ping command from the module to a remote host. The results | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 19 | /// The AT+UPING allows the user to execute a ping command from the module to a remote host. The results | ++

warning: doc list item missing indentation --> src/command/ping/urc.rs:24:5 | 24 | /// in another way. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 24 | /// in another way. | ++

warning: doc list item missing indentation --> src/command/ping/urc.rs:23:5 | 23 | /// OBS: If a remote host does not reply to an ICMP echo request, it does not mean that the host cannot be reached | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 23 | /// OBS: If a remote host does not reply to an ICMP echo request, it does not mean that the host cannot be reached | ++

warning: doc list item missing indentation --> src/command/ping/urc.rs:22:5 | 22 | /// OBS: Some remote hosts might not reply to the ICMP echo request if the data size of the echo request is too big. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 22 | /// OBS: Some remote hosts might not reply to the ICMP echo request if the data size of the echo request is too big. | ++

warning: doc list item missing indentation --> src/command/ping/urc.rs:21:5 | 21 | /// settings). | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 21 | /// settings). | ++

warning: doc list item missing indentation --> src/command/ping/urc.rs:20:5 | 20 | /// OBS: Some remote hosts might not reply to the ICMP echo request for security reasons (for example, firewall | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 20 | /// OBS: Some remote hosts might not reply to the ICMP echo request for security reasons (for example, firewall | ++

warning: doc list item missing indentation --> src/command/ping/urc.rs:19:5 | 19 | /// result (when there is no error). | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 19 | /// result (when there is no error). | ++

warning: doc list item missing indentation --> src/command/ping/urc.rs:18:5 | 18 | /// of the ping command execution is notified through the +UUPING: URC, which reports the +UPING command | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 18 | /// of the ping command execution is notified through the +UUPING: URC, which reports the +UPING command | ++

warning: doc list item missing indentation --> src/command/ping/urc.rs:17:5 | 17 | /// The AT+UPING allows the user to execute a ping command from the module to a remote host. The results | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 17 | /// The AT+UPING allows the user to execute a ping command from the module to a remote host. The results | ++

warning: doc list item missing indentation --> src/command/ping/types.rs:23:5 | 23 | /// echo request. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 23 | /// echo request. | ++

warning: doc list item missing indentation --> src/command/ping/types.rs:22:5 | 22 | /// The time in milliseconds to wait after an echo reply response before sending the next | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 22 | /// The time in milliseconds to wait after an echo reply response before sending the next | ++

warning: doc list item missing indentation --> src/command/ping/types.rs:18:5 | 18 | /// provides the TTL value received in the incoming packet. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 18 | /// provides the TTL value received in the incoming packet. | ++

warning: doc list item missing indentation --> src/command/ping/types.rs:17:5 | 17 | /// The value of TTL to be set for the outgoing echo request packet. In the URC, it | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 17 | /// The value of TTL to be set for the outgoing echo request packet. In the URC, it | ++

warning: doc list item missing indentation --> src/command/ping/types.rs:13:5 | 13 | /// The maximum time in milliseconds to wait for an echo reply response. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 13 | /// The maximum time in milliseconds to wait for an echo reply response. | ++

warning: doc list item missing indentation --> src/command/ping/types.rs:9:5 | 9 | /// Size in bytes of the echo packet payload. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 9 | /// Size in bytes of the echo packet payload. | ++

warning: doc list item missing indentation --> src/command/network/types.rs:237:9 | 237 | /// with the U/L bit set to 1 for a locally administered address. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 237 | /// with the U/L bit set to 1 for a locally administered address. | ++

warning: doc list item missing indentation --> src/command/network/types.rs:235:9 | 235 | /// bridge is used. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 235 | /// bridge is used. | ++

warning: doc list item missing indentation --> src/command/network/types.rs:234:9 | 234 | /// network interface configurations is not used while the IP configuration of the | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 234 | /// network interface configurations is not used while the IP configuration of the | ++

warning: doc list item missing indentation --> src/command/network/types.rs:233:9 | 233 | /// the bridge is handled by the bridge. The IP configuration set in the individual | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 233 | /// the bridge is handled by the bridge. The IP configuration set in the individual | ++

warning: doc list item missing indentation --> src/command/network/types.rs:205:9 | 205 | /// enabled, the IPv4 Mode should be set to static. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 205 | /// enabled, the IPv4 Mode should be set to static. | ++

warning: doc list item missing indentation --> src/command/network/types.rs:204:9 | 204 | /// following formula - "(Static address and subnet mask) + 100". If DHCP Server is | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 204 | /// following formula - "(Static address and subnet mask) + 100". If DHCP Server is | ++

warning: doc list item missing indentation --> src/command/network/types.rs:176:9 | 176 | /// interfaces to accept IP traffic. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 176 | /// interfaces to accept IP traffic. | ++

warning: doc list item missing indentation --> src/command/network/types.rs:175:9 | 175 | /// For example, AT+UBRGC = 0,2,1,3. This allows the Wi-Fi station and Ethernet | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 175 | /// For example, AT+UBRGC = 0,2,1,3. This allows the Wi-Fi station and Ethernet | ++

warning: doc list item missing indentation --> src/command/network/types.rs:174:9 | 174 | /// 6.0.0 onwards only. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 174 | /// 6.0.0 onwards only. | ++

warning: doc list item missing indentation --> src/command/network/types.rs:164:9 | 164 | /// interfaces to the bridge. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 164 | /// interfaces to the bridge. | ++

warning: doc list item missing indentation --> src/command/network/types.rs:163:9 | 163 | /// For example, AT+UBRGC = 0,1,1,3. This adds the Wi-Fi station and Ethernet | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 163 | /// For example, AT+UBRGC = 0,1,1,3. This adds the Wi-Fi station and Ethernet | ++

warning: doc list item missing indentation --> src/command/network/types.rs:162:9 | 162 | /// 6.0.0 onwards only. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 162 | /// 6.0.0 onwards only. | ++

warning: doc list item missing indentation --> src/command/network/types.rs:83:9 | 83 | /// version 5.0.0 onwards only. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 83 | /// version 5.0.0 onwards only. | ++

warning: doc list item missing indentation --> src/command/network/types.rs:28:9 | 28 | /// version 5.0.0 onwards only. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 28 | /// version 5.0.0 onwards only. | ++

warning: doc list item missing indentation --> src/command/ethernet/types.rs:154:9 | 154 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 154 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ++

warning: doc list item missing indentation --> src/command/ethernet/types.rs:148:9 | 148 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 148 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ++

warning: doc list item missing indentation --> src/command/ethernet/types.rs:142:9 | 142 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 142 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ++

warning: doc list item missing indentation --> src/command/ethernet/types.rs:136:9 | 136 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 136 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ++

warning: doc list item missing indentation --> src/command/ethernet/types.rs:89:9 | 89 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 89 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ++

warning: doc list item missing indentation --> src/command/ethernet/types.rs:83:9 | 83 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 83 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ++

warning: doc list item missing indentation --> src/command/ethernet/types.rs:77:9 | 77 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 77 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ++

warning: doc list item missing indentation --> src/command/ethernet/types.rs:71:9 | 71 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 71 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ++

warning: doc list item missing indentation --> src/command/ethernet/types.rs:33:9 | 33 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 33 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ++

warning: doc list item missing indentation --> src/command/ethernet/types.rs:28:9 | 28 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 28 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ++

warning: doc list item missing indentation --> src/command/ethernet/types.rs:23:9 | 23 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 23 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ++

warning: doc list item missing indentation --> src/command/ethernet/types.rs:18:9 | 18 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 18 | /// Not available for ODIN-W2 software versions 2.0.0 or 2.0.1. Default PHY values will be used. | ++

warning: doc list item missing indentation --> src/command/data_mode/types.rs:206:9 | 206 | /// multiple TCP links are used, this should be low. | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation help: indent this line | 206 | /// multiple TCP links are used, this should be low. | ++

warning: doc list item missing indentation --> src/command/data_mode/types.rs:201:9 | 201 | /// always connected bit set (Default is 10000) | ^ | = help: if this is supposed to be its own paragraph, add a blank line = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation = note: `#[warn(clippy::doc_lazy_continuation)]` on by default help: indent this line | 201 | /// always connected bit set (Default is 10000) | ++

warning: you seem to be trying to use `match` for destructuring a single pattern. Consider using `if let` --> src/asynch/network.rs:59:13 | 59 | / match embassy_futures::select::select( 60 | | self.urc_subscription.next_message_pure(), 61 | | self.ch.wait_for_wifi_state_change(), 62 | | ) ... | 73 | | _ => {} 74 | | } | |_____________^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#single_match = note: `#[warn(clippy::single_match)]` on by default help: try | 59 ~ if let embassy_futures::select::Either::First(event) = embassy_futures::select::select( 60 + self.urc_subscription.next_message_pure(), 61 + self.ch.wait_for_wifi_state_change(), 62 + ) 63 + .await { 64 + #[cfg(feature = "edm")] 65 + let Some(event) = event.extract_urc() else { 66 + continue; 67 + }; 68 + 69 + self.handle_urc(event).await?; 70 + } |

warning: redundant field names in struct initialization --> src/asynch/control.rs:147:13 | 147 | urc_channel: urc_channel, | ^^^^^^^^^^^^^^^^^^^^^^^^ help: replace it with: `urc_channel` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_field_names = note: `#[warn(clippy::redundant_field_names)]` on by default

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions uses Node.js version which is deprecated and will be forced to run on node20: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The following actions uses Node.js version which is deprecated and will be forced to run on node20: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/