Skip to content

Latest commit

 

History

History
59 lines (38 loc) · 2.86 KB

Draft_Snap_Parallel.md

File metadata and controls

59 lines (38 loc) · 2.86 KB
GuiCommand
Name Name/tr MenuLocation Workbenches Shortcut SeeAlso
Draft Snap Parallel
Taslak Paralel
Taslak , Draft Snap/tr , Paralel
Draft_Workbench/tr, Arch_Workbench/tr

Draft Snap Parallel/tr

Açıklama

Bu Yakalama modu, hayali bir çizgi üzerinde çizgi parçasına paralel bir nokta seçmenizi sağlar.

The Draft Snap Parallel option snaps to an imaginary line parallel to straight edges. The edges can belong to Draft or BIM objects but also to objects created with other workbenches.

Up to 8 edges can be referenced by this snap option and Draft Snap Extension, making it possible to snap to virtual intersections. Both snap options can also be combined with other snap options.

Snapping the second point of a line to an invisible line that is parallel to an edge

Kullanın

  1. Yakalama modunun açık olduğundan emin olun
  2. FreeCAD belgeside işlem yapılacak bileşeni seçin

For general information about snapping see Draft Snap.

  1. Make sure snapping is enabled. See Draft Snap Lock.
  2. If Draft Snap Parallel is not active do one of the following:
    • Press the Snap parallel button in the Draft snap toolbar.
    • Draft: Hold down the button in the Draft snap widget and in the menu that opens select the Snap parallel option.
    • BIM: Select the Snapping → Snap parallel option from the menu, or from the 3D view context menu.
  3. Choose a Draft or BIM command to create your geometry.
  4. Note that you can also change snap options while a command is active.
  5. Pick a first point. This snap option requires a previous point. The parallel snap line will pass through this point.
  6. Move the cursor over a straight edge.
  7. The edge is highlighted.
  8. If you now move the cursor around the previous point you will notice a "magnetic" effect when the cursor is on the parallel snap line.
  9. The point is marked and the icon is displayed near the cursor.
  10. Click to confirm the point.

Preferences

See Draft Snap.

⏵ documentation index > Draft > Draft Snap Parallel/tr