Draft_Snap_WorkingPlane.md

GuiCommand
Name Name/tr MenuLocation Workbenches Shortcut SeeAlso Draft Snap WorkingPlane Taslak Çalışma düzlemi Taslak , Draft Snap/tr , Çalışma düzlemi Draft_Workbench/tr, Arch_Workbench/tr

Draft Snap WorkingPlane/tr

Açıklama

Çalışma düzleminin dışındaki bir noktaya oturtsanız bile, yakalanan noktayı daima geçerli Çalışma düzlemi üzerine yerleştiren yakalama modu.

Snapping the second point of a line to the projected endpoint of an edge

Kullanım

For general information about snapping see Draft Snap.

1. Optionally change the working plane.
2. Make sure snapping is enabled. See Draft Snap Lock.
3. If Draft Snap WorkingPlane is not active do one of the following:
   • Press the Snap working plane button in the Draft snap toolbar.
   • Draft: Press the Snap working plane button in the Draft snap widget.
   • BIM: Select the Snapping → Snap working plane option from the menu, or from the 3D view context menu.
4. Make sure at least one other snap option is active.
5. Choose a Draft or BIM command to create your geometry.
6. Note that you can also change snap options while a command is active.
7. Move the cursor over the object you want to snap to.
8. The object is highlighted.
9. If a snap point is found it is projected onto the working plane where it is marked.
10. Click to confirm the point.

Preferences

See Draft Snap.

---

⏵ documentation index > Draft > Draft Snap WorkingPlane/tr