KAMP-for-K1-Series shows Repo is corrupt

[steveharman]

Prior to the latest script which incorporates the KAMP toggle, I had followed instructions here and manually implemented the toggle option. Since that point Fluidd -> System -> Software update showed "Repo is corrupt":

I am now on the latest script but the error persists. I've tried removing and reinstalling KAMP support but that didn't help.

I tried using the Recover option in Software Update, which results in this error:

Git Repo KAMP-for-K1-Series: Attempting Repo Recovery...
Git Repo KAMP-for-K1-Series: Resetting Git Repo...
fatal: could not read Username for 'https://github.com': No such device or address
Attempting to repair loose objects...
Attempt to repair loose objects failed, hard recovery is required
Error Recovering KAMP-for-K1-Series
Git Repo KAMP-for-K1-Series: Attempting Repo Recovery...
Git Repo KAMP-for-K1-Series: Starting Clone Recovery...
Cloning into '/usr/data/.KAMP-for-K1-Series_repo_backup'...
fatal: could not read Username for 'https://github.com': No such device or address
Git Repo KAMP-for-K1-Series: Git Clone Failed
Error Recovering KAMP-for-K1-Series

Now that the KAMP toggle is supported within the script I'd just like to forget about the manual change and have a clean repo like all the other components. How can I achieve this please?

[alkattaf]

Re install root and everything's again
There are alot of change with the new update

[steveharman]

ok, thanks. And start with a full factory reset? As per: https://guilouz.github.io/Creality-K1-Series/firmwares/reset-factory-settings/

[alkattaf]

Yes , full factory reset , then root again , you can check the change log , more future added

[steveharman]

Great, many thanks.

[leseaw]

https://github.com/Guilouz/KAMP-for-K1-Series

This is because the site has moved.
Click on the small square with the arrow and you will see the old url in it