-
-
Notifications
You must be signed in to change notification settings - Fork 42
Get USB Serial from Motherboard
-
Connect your printer to one of the Speeder Pad's USB ports.
-
Connect in SSH then enter the following command to retrieve the motherboard USB serial:
cd ~ && ls /dev/serial/by-id/*
-
You should see the USB serial appear like this (serial is different depending on the motherboard):
-
In case you use same multiple printers connected on the Speeder Pad and you only see one serial when running this command, enter this one instead:
ls /dev/serial/by-path/*
-
If the second command shows multiple results, adjust the path of the serial accordingly, so all instances of
/by-id/
should be replaced with/by-path/
. -
Go to your Mainsail Web interface then click on
Machine
tab. -
Open
printer.cfg
file and find[mcu]
section. -
Edit the following existing line with serial you have just obtained like this:
serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
-
Click on
SAVE & RESTART
at the top right to save the file. -
Your printer should connect to your Speeder Pad.
• About
• Wiki Changelog
• KlipperScreen Changelog
• STL Files & Themes
• Restore OS Image File
• SSH Connection
• Change pi User Password
• Change Timezone
• Change Wi-Fi Location
• Update Dependencies
• Delete Flsun Builds
• Install Official Builds (1 instance)
• Install Official Builds (Multiple instances)
• V400 (MKS Nano V2.0 - STM32F103)
• V400 (Nano V2.1 Clone - GD32F303)
• V400 (BigTreeTech SKR 3.0)
• V400 (MKS Nano V3.0/V3.1)
• Super Racer (MKS Nano V3.0/V3.1)
• Super Racer (BigTreeTech SKR 1.3)
• Super Racer (BigTreeTech SKR 2.0)
• Fix Shutdown button in Mainsail
• Add Webcams Support
• Add Timelapse Support
• Add Exclude Objects Support
• Use Klipper TMC Autotune
• Use Neopixels Ring Light
• Use BigTreeTech KNOMI
• Calibrate your Printer
• Measure resonances with Raspberry Pi Pico
• Measure resonances with Fysetc Portable Input Shaper
• Start and End Gcode
• Enable Firmware Retraction
• Display Thumbnails in Mainsail and KlipperScreen
• Enable Root Access
• Change SSH Welcome Message and Cleanup Files
• Set a Static IP Address
• Change Boot Logo