Releases · Guilouz/Marlin-SuperRacer-MKS-Nano-V3

Firmware can be used with latest screen firmware V1.3 (see Readme for installation).
Improved motors current to 1250mA.
Added a command to control screen buzzer : M114 B0 & M500 to disable sound, M114 B1 & M500 to enable sound. By default sound is disabled.
Changed filament runout distance to 15mm.

If you like my job, you can support me by paying me a 🍺 or a ☕. Thanks 🙂

Assets 4

03 Sep 12:47

Guilouz

Firmware 03/09/2021

Unwanted EEPROM writes caused by power loss recovery feature are disabled. This fixes the EEPROM save/load issues.
STM32: Prevent possible crashes before HAL init.
Make F_CPU a compile time constant (and not a runtime constant).
Fixed Robin Nano V3 board X-diag pin.
Fixed smaller and larger I2C EEPROM support.
HAL eeprom cleanup.

If you like my job, you can support me by paying me a 🍺 or a ☕. Thanks 🙂

Assets 4

01 Sep 00:01

Guilouz

Firmware 01/09/2021

Fixed settings not stored correctly in EEPROM and not loaded correctly after power off/power on (language, Z0 etc.).
Fixed MKS Robin Nano V3 I2C pins.
Avoid triggering watchdog during long wired EEPROM writes.
Prevent watchdog reset.
Blocking Move Followup 2 (fix delta failed probe).

Special Thanks to MaximumChungus.

If you like my job, you can support me by paying me a 🍺 or a ☕. Thanks 🙂

Assets 2

20 Aug 13:45

Guilouz

Firmware 20/08/2021

Attempt to fix issue with missing text after flash (take a look to new steps of readme).
Attempt to fix issue were some settings was not registered to EEPROM (like Z0).

If you like my job, you can support me by paying me a 🍺 or a ☕. Thanks 🙂

Assets 2

18 Aug 00:26

Guilouz

Firmware 18/08/2021

If you like my job, you can support me by paying me a 🍺 or a ☕. Thanks 🙂

Assets 2

Provide feedback