I2ML Homepage

A simple lab webpage without any backstage or database!

Responsive for all devices including computer, phone and pad!

Contents of the page (i.e., members, news, publications and photos) can be easily updated by editing the dictionary files!

By fork -> edit elements of dict file -> pull, everyone can easily edit the contents!

Guidance for Update Members

Just edit elements in contents/members.js. In addition, since every member has a corresponding photo, you may need upload a photo to photos/ folder.

Example of adding a new student member:

Suppose we are going to adding a new postgraduate student named "Aris", whose year of attendence is 2023 and his research is about image recogonation.

First, upload his photo to "photos/2023/" folder, let the filename be "xx.png" (of course, "Aris.png" is more suggested). Notice: "xx.png" is better not to be too large, otherwise it will load slowly. <50KB is recommended.

Then, open up "contents/members.js", you will get a variable named members. Find the key of "Student":

members = {
    // ...
    "Student":[
        {
            "name":"Kang You",
            "photoUrl":"./photos/2020/Kang You.jpg",
            "introduction":"Research Area: Lossy Point Cloud Geometry Compression using Deep Learning.",
            "footnote":"Master Student",
            "footnote2":"Year of Attendance: 2020"
        },
        // etc...
    ],
    // etc...
}

Finally, add a new element with a similar format of other members:

members = {
    // etc...
    "Student":[
        {
            "name":"Aris",
            "photoUrl":"./photos/2023/xx.png",
            "introduction":"Research Area: Image Recogonation.",
            "footnote":"Master Student",
            "footnote2":"Year of Attendance: 2023"
        }, // don't forget this comma
        {
            "name":"Kang You",
            "photoUrl":"./photos/2020/Kang You.jpg",
            "introduction":"Research Area: Lossy Point Cloud Geometry Compression using Deep Learning.",
            "footnote":"Master Student",
            "footnote2":"Year of Attendance: 2020"
        },
        // etc...
    ],
    // etc...
}

Done! Every one will see Aris in the index page and member page!

Similarly, delete or edit the members in I2ML just need to delete or edit the corresponding elements of this file! Faculty members and Alumi members are in the same way.

Guidance for Update News

Just edit elements in contents/news.js.

Example of adding a new news:

Suppose we are going to adding a new news titled "Our paper accepted by CVPR!" with a content of "Congrats content." in 2023-01-01.

First, open up "contents/news.js", you will get a variable named news.

news = [
    {
        'title':'New homepage of our I2ML is published online!',
        'date':'2023-01-25',
        'newbrand':false,
        'content':'Publishing content from a website can be accomplished simply by manipulating dictionary objects! See our GitHub for details on the source code and how to use it!😄',
    },
    // etc...
}

Then, add a new element with a similar format of other news:

news = [ 
    {
        'title':'Our paper accepted by CVPR!',
        'date':'2023-01-01',
        'newbrand':true, // set true to show a cute red "New" tab before the title
        'content':'Congrats content.',
    }, // don't forget this comma
    {
        'title':'New homepage of our I2ML is published online!',
        'date':'2023-01-25',
        'newbrand':false,
        'content':'Publishing content from a website can be accomplished simply by manipulating dictionary objects! See our GitHub for details on the source code and how to use it!😄',
    },
    // etc...
}

Done! Every one will see this news in the index page and news page!

Similarly, delete or edit the news in I2ML just need to delete or edit the corresponding elements of this file!

Guidance for Update Publications

Just edit elements in contents/publications.js.

Example of adding a new publication:

Suppose we are going to adding a new publication titled "Aris, I2ML is all you need, CVPR, 2023." with paperlink of "https://ieeexplore.ieee.org/abstract/document/0000000/".

First, open up "contents/publications.js", you will get a variable named publications:

publications = [
    {
        'title':"Kang You, Pan Gao, and Qing Li. 2022. IPDAE: Improved Patch-Based Deep Autoencoder for Lossy Point Cloud Geometry Compression. In Proceedings of the 1st International Workshop on Advances in Point Cloud Compression, Processing and Analysis (APCCPA '22). Association for Computing Machinery, New York, NY, USA, 1–10.",
        'year':2022,
        'paperlink':'https://dl.acm.org/doi/abs/10.1145/3552457.3555728',
        'arxivlink':'https://arxiv.org/abs/2208.02519',
        'codelink':'https://github.com/I2-Multimedia-Lab/IPDAE',
    },
    // etc...
]

Then, add a new element with a similar format of other publications:

publications = [
    {
        'title':"Aris, I2ML is all you need, CVPR, 2023.",
        'year':2023，
        'paperlink':'https://ieeexplore.ieee.org/abstract/document/0000000/',
        'arxivlink':'', // if you have an arxiv version, put the link in. other wise keep an empty quotes like ''.
        'codelink':'', // if you have an open-source code, put the link in. other wise keep an empty quotes like ''.
    }, // don't forget this comma
    {
        'title':"Kang You, Pan Gao, and Qing Li. 2022. IPDAE: Improved Patch-Based Deep Autoencoder for Lossy Point Cloud Geometry Compression. In Proceedings of the 1st International Workshop on Advances in Point Cloud Compression, Processing and Analysis (APCCPA '22). Association for Computing Machinery, New York, NY, USA, 1–10.",
        'year':2022,
        'paperlink':'https://dl.acm.org/doi/abs/10.1145/3552457.3555728',
        'arxivlink':'https://arxiv.org/abs/2208.02519',
        'codelink':'https://github.com/I2-Multimedia-Lab/IPDAE',
    },
    // etc...
]

Done! Every one will see this publication in the index page and publication page!

Similarly, delete or edit the publication in I2ML just need to delete or edit the corresponding elements of this file!

Guidance for Update Gallery

Just edit elements in contents/gallery.js. If you are adding a photo, make sure you have uploaded a photo to the "/photos/gallery/" folder.

Example of adding a new photo to the gallery:

Suppose we are going to adding a new photo with labels "2023-05-02" and "Test Label".

First, upload photo to "/photos/gallery/" folder, let the filename be "xx.jpg" (using the name of date such as "20230502.jpg" is more suggested!)

Then, open contents/gallery.js, you will get a variable named gallery.

gallery = [
    {
        photo: './photos/gallery/12.jpg',
        labels:['2023-04-07', 'Graduation'],
        thumbnail:'./photos/gallery/12.jpg',
    },
    // etc...
]

Then, just add a new element with a similar format like other photos:

gallery = [
    {
        photo: './photos/gallery/xx.jpg',
        labels:['2023-05-02', 'Test Label'],
    }, // don't forget this comma
    {
        photo: './photos/gallery/12.jpg',
        labels:['2023-04-07', 'Graduation'],
        thumbnail:'./photos/gallery/12.jpg',
    },
    // etc...
]

Done! Every one will see Aris in the index page and member page!

Similarly, delete or edit the photos in I2ML just need to delete or edit the corresponding elements of this file!

You may have noticed that there is a "thumbnail" attribute on the element below. It's ok to omit this attribute when the photo is not too large, for example, less than 2MB. But, for those HD photos with large size, a thumnail is highly recommanded.

For example, if the above-mentioned “xx.jpg” is too large, you'd better upload a smaller version "xx-lr.jpg" to "/photos/gallery/", and linked to the thumbnail attribute:

gallery = [
    {
        photo: './photos/gallery/xx.jpg',
        labels:['2023-05-02', 'Test Label'],
        thumbnail: './photos/gallery/xx-lr.jpg',
    },
    // etc...
]

Then, the thumbnial will be shown in the gallery page, instead of the HD photo. The real photo will not be shown until user click on the image.

File Organization

This project is organized in the following format:

project/
    ├── assets/
    |       ├── css/    //
    |       ├── img/    // 网页tab上的logo、NUAAlogo、微信扫一扫图片等
    |       ├── js/     //
    |       └── scss/   //
    ├── contents/
    |       ├── config.js       // 页面的某些设置，如主页最多显示几条新闻等，可以在这里修改
    |       ├── gallery.js      // 照片墙变量
    |       ├── members.js      // 成员列表变量
    |       ├── news.js         // 新闻列表变量
    |       └── publications.js // 成果列表变量
    ├── photos/             // 照片
    ├── article.html        // 新闻详情页
    ├── gallery.html        // 照片墙页
    ├── index.html          // 主页（包含部分成员、新闻及成果）
    ├── members.html        // 成员列表页
    ├── news.html           // 新闻列表页
    ├── publications.html   // 成果列表页
    └── README.md

Thanks

This project is build upon Mundana, a free HTML bootstrap blogging template by Sal.

Also, thanks to the great efforts of: Bootstrap, Gulp and SASS.

Thank you for your support!