LUMOS RISC-V

Light Utilization with Multicycle Operational Stages (LUMOS) RISC-V Processor Core

Introduction

LUMOS is a multicycle RISC-V processor that implements a subset of RV32I instruction set, designed for educational use in computer organization classes at Iran University of Science and Technology. It allows for modular design projects, enabling students to gain hands-on experience with processor architecture.

Features

• LUMOS executes instructions in multiple stages, such as instruction_fetch, fetch_wait, fetch_done, decode, execute, memory_access, and etc. This approach allows for more complex operations and better utilization of processor resources compared to single-cycle designs. This processor does not support the entire RV32I instruction set, which is the base integer instruction set of RISC-V. Instead, it focuses on a subset of instructions that are essential for educational purposes and demonstrating the principles of computer architecture.

• The processor is designed with modularity in mind, allowing students to work on various components of the processor. As part of their course projects, students will design different execution units, such as FPUs, control units, memory interfaces, and other modules that are integral to the processor's functionality.

LUMOS Datapath

In a multicycle implementation, we can break down each instruction into a series of steps corresponding to the functional unit operations that are needed. These steps can be used to create a multi-cycle implementation. In this architecture, each step will take 1 clock cycle. This allows that components in the design and different functional units to be used more than once per instruction, as long as it is used on different clock cycles. This sharing of resources can help reduce the amount of hardware required. This classic view of CPU design partitions the design of a processor into data path design and control design. Data path design focuses on the design of ALU and other functional units as well as accessing the registers and memory. Control path design focuses on the design of the state machines to decode instructions and generate the sequence of control signals necessary to appropriately manipulate the data path.

Synthesis

This processor core is synthesizable in the 45nm CMOS technology node. LUMOS has gone through the RTL-to-GDS flow using Synopsys Design Compiler and Cadence SoC Encounter tools. At this node, the core can achieve a frequency of 500MHz while occupying 12000um2 of area and consuming around 3mw of power.

Copyright

Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.

Copyright 2024 Iran University of Science and Technology - iustCompOrg@gmail.com