NEWS

Noteworthy changes in release 1.6 (28th September 2017)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

* Fixed bug where iterators on CRAM files did not propagate error return
  values to the caller correctly.  Thanks go to Chris Saunders.

* Overhauled Windows builds.  Building with msys2/mingw64 now works
  correctly and passes all tests.

* More improvements to logging output (thanks again to Anders Kaplan).

* Return codes from sam_read1() when reading cram have been made
  consistent with those returned when reading sam/bam.  Thanks to
  Chris Saunders (#575).

* BGZF CRC32 checksums are now always verified.

* It's now possible to set nthreads = 1 for cram files.

* hfile_libcurl has been modified to make it thread-safe.  It's also
  better at handling web servers that do not honour byte range requests
  when attempting to seek - it now sets errno to ESPIPE and keeps
  the existing connection open so callers can revert to streaming mode
  it they want to.

* hfile_s3 now recalculates access tokens if they have become stale.  This
  fixes a reported problem where authentication failed after a file
  had been in use for more than 15 minutes.

* Fixed bug where remote index fetches would fail to notice errors when
  writing files.

* bam_read1() now checks that the query sequence length derived from the
  CIGAR alignment matches the sequence length in the BAM record.

Noteworthy changes in release 1.5 (21st June 2017)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

* Added a new logging API: hts_log(), along with hts_log_error(),
  hts_log_warn() etc. convenience macros.  Thanks go to Anders Kaplan
  for the implementation. (#499, #543, #551)

* Added a new file I/O option "block_size" (HTS_OPT_BLOCK_SIZE) to
  alter the hFILE buffer size.

* Fixed various bugs, including compilation issues samtools/bcftools#610,
  samtools/bcftools#611 and robustness to corrupted data #537, #538,
  #541, #546, #548, #549, #554.


Noteworthy changes in release 1.4.1  (8th May 2017)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This is primarily a security bug fix update.

* Fixed SECURITY (CVE-2017-1000206) issue with buffer overruns with malicious data. (#514).

* S3 support for non Amazon AWS endpoints. (#506)

* Support for variant breakpoints in bcftools. (#516)

* Improved handling of BCF NaNs. (#485)

* Compilation / portability improvements. (#255, #423, #498, #488)

* Miscellaneous bug fixes (#482, #521, #522, #523, #524).

* Sanitise headers (#509)


Release 1.4 (13 March 2017)

* Incompatible changes: several functions and data types have been changed
  in this release, and the shared library soversion has been bumped to 2.

  - bam_pileup1_t has an additional field (which holds user data)
  - bam1_core_t has been modified to allow for >64K CIGAR operations
    and (along with bam1_t) so that CIGAR entries are aligned in memory
  - hopen() has vararg arguments for setting URL scheme-dependent options
  - the various tbx_conf_* presets are now const
  - auxiliary fields in bam1_t are now always stored in little-endian byte
    order (previously this depended on if you read a bam, sam or cram file)
  - index metadata (accessible via hts_idx_get_meta()) is now always
    stored in little-endian byte order (previously this depended on if
    the index was in tbi or csi format)
  - bam_aux2i() now returns an int64_t value
  - fai_load() will no longer save local copies of remote fasta indexes
  - hts_idx_get_meta() now takes a uint32_t * for l_meta (was int32_t *)

* HTSlib now links against libbz2 and liblzma by default.  To remove these
  dependencies, run configure with options --disable-bz2 and --disable-lzma,
  but note that this may make some CRAM files produced elsewhere unreadable. 

* Added a thread pool interface and replaced the bgzf multi-threading
  code to use this pool.  BAM and CRAM decoding is now multi-threaded
  too, using the pool to automatically balance the number of threads
  between decode, encode and any data processing jobs.

* New errmod_cal(), probaln_glocal(), sam_cap_mapq(), and sam_prob_realn()
  functions, previously internal to SAMtools, have been added to HTSlib.

* Files can now be accessed via Google Cloud Storage using gs: URLs, when
  HTSlib is configured to use libcurl for network file access rather than
  the included basic knetfile networking.

* S3 file access now also supports the "host_base" setting in the
  $HOME/.s3cfg configuration file.

* Data URLs ("data:,text") now follow the standard RFC 2397 format and may
  be base64-encoded (when written as "data:;base64,text") or may include
  percent-encoded characters.  HTSlib's previous over-simplified "data:text"
  format is no longer supported -- you will need to add an initial comma.

* When plugins are enabled, S3 support is now provided by a separate
  hfile_s3 plugin rather than by hfile_libcurl itself as previously.
  When --enable-libcurl is used, by default both GCS and S3 support
  and plugins will also be built; they can be individually disabled
  via --disable-gcs and --disable-s3.

* The iRODS file access plugin has been moved to a separate repository.
  Configure no longer has a --with-irods option; instead build the plugin
  found at <https://github.com/samtools/htslib-plugins>.

* APIs to portably read and write (possibly unaligned) data in little-endian
  byte order have been added.

* New functions bam_auxB_len(), bam_auxB2i() and bam_auxB2f() have been
  added to make accessing array-type auxiliary data easier.  bam_aux2i()
  can now return the full range of values that can be stored in an integer
  tag (including unsigned 32 bit tags).  bam_aux2f() will return the value
  of integer tags (as a double) as well as floating-point ones.  All of
  the bam_aux2 and bam_auxB2 functions will set errno if the requested
  conversion is not valid.

* New functions fai_load3() and fai_build3() allow fasta indexes to be
  stored in a different location to the indexed fasta file.

* New functions bgzf_index_dump_hfile() and bgzf_index_load_hfile()
  allow bgzf index files (.gzi) to be written to / read from an existing
  hFILE handle.

* hts_idx_push() will report when trying to add a range to an index that
  is beyond the limits that the given index can handle.  This means trying
  to index chromosomes longer than 2^29 bases with a .bai or .tbi index
  will report an error instead of apparantly working but creating an invalid
  index entry.

* VCF formatting is now approximately 4x faster.  (Whether this is
  noticable depends on what was creating the VCF.)

* CRAM lossy_names mode now works with TLEN of 0 or TLEN within +/- 1
  of the computed value.  Note in these situations TLEN will be
  generated / fixed during CRAM decode.

* CRAM now supports bzip2 and lzma codecs.  Within htslib these are
  disabled by default, but can be enabled by specifying "use_bzip2" or
  "use_lzma" in an hts_opt_add() call or via the mode string of the
  hts_open_format() function.

Noteworthy changes in release 1.3.2  (13 September 2016)

* Corrected bin calculation when converting directly from CRAM to BAM.
  Previously a small fraction of converted reads would fail Picard's
  validation with "bin field of BAM record does not equal value computed"
  (SAMtools issue #574).

* Plugins can now signal to HTSlib which of RTLD_LOCAL and RTLD_GLOBAL
  they wish to be opened with -- previously they were always RTLD_LOCAL.


Noteworthy changes in release 1.3.1  (22 April 2016)

* Improved error checking and reporting, especially of I/O errors when
  writing output files (#17, #315, PR #271, PR #317).

* Build fixes for 32-bit systems; be sure to run configure to enable
  large file support and access to 2GiB+ files.

* Numerous VCF parsing fixes (#321, #322, #323, #324, #325; PR #370).
  Particular thanks to Kostya Kortchinsky of the Google Security Team
  for testing and numerous input parsing bug reports.

* HTSlib now prints an informational message when initially creating a
  CRAM reference cache in the default location under your $HOME directory.
  (No message is printed if you are using $REF_CACHE to specify a location.)

* Avoided rare race condition when caching downloaded CRAM reference sequence
  files, by using distinctive names for temporary files (in addition to O_EXCL,
  which has always been used).  Occasional corruption would previously occur
  when multiple tools were simultaneously caching the same reference sequences
  on an NFS filesystem that did not support O_EXCL (PR #320).

* Prevented race condition in file access plugin loading (PR #341).

* Fixed mpileup memory leak, so no more "[bam_plp_destroy] memory leak [...]
  Continue anyway" warning messages (#299).

* Various minor CRAM fixes.

* Fixed documentation problems #348 and #358.


Noteworthy changes in release 1.3  (15 December 2015)

* Files can now be accessed via HTTPS and Amazon S3 in addition to HTTP
  and FTP, when HTSlib is configured to use libcurl for network file access
  rather than the included basic knetfile networking.

* HTSlib can be built to use remote access hFILE backends (such as iRODS
  and libcurl) via a plugin mechanism.  This allows other backends to be
  easily added and facilitates building tools that use HTSlib, as they
  don't need to be linked with the backends' various required libraries.

* When writing CRAM output, sam_open() etc now default to writing CRAM v3.0
  rather than v2.1.

* fai_build() and samtools faidx now accept initial whitespace in ">"
  headers (e.g., "> chr1 description" is taken to refer to "chr1").

* tabix --only-header works again (was broken in 1.2.x; #249).

* HTSlib's configure script and Makefile now fully support the standard
  convention of allowing CC/CPPFLAGS/CFLAGS/LDFLAGS/LIBS to be overridden
  as needed.  Previously the Makefile listened to $(LDLIBS) instead; if you
  were overriding that, you should now override LIBS rather than LDLIBS.

* Fixed bugs #168, #172, #176, #197, #206, #225, #245, #265, #295, and #296.


Noteworthy changes in release 1.2.1  (3 February 2015)

* Reinstated hts_file_type() and FT_* macros, which were available until 1.1
  but briefly removed in 1.2.  This function is deprecated and will be removed
  in a future release -- you should use hts_detect_format() etc instead


Noteworthy changes in release 1.2  (2 February 2015)

* HTSlib now has a configure script which checks your build environment
  and allows for selection of optional extras.  See INSTALL for details

* By default, reference sequences are fetched from the EBI CRAM Reference
  Registry and cached in your $HOME cache directory.  This behaviour can
  be controlled by setting REF_PATH and REF_CACHE enviroment variables
  (see the samtools(1) man page for details)

* Numerous CRAM improvements:
  - Support for CRAM v3.0, an upcoming revision to CRAM supporting
    better compression and per-container checksums
  - EOF checking for v2.1 and v3.0 (similar to checking BAM EOF blocks)
  - Non-standard values for PNEXT and TLEN fields are now preserved
  - hts_set_fai_filename() now provides a reference file when encoding
  - Generated read names are now numbered from 1, rather than being
    labelled 'slice:record-in-slice'
  - Multi-threading and speed improvements

* New htsfile command for identifying file formats, and corresponding
  file format detection APIs

* New tabix --regions FILE, --targets FILE options for filtering via BED files

* Optional iRODS file access, disabled by default.  Configure with --with-irods
  to enable accessing iRODS data objects directly via 'irods:DATAOBJ'

* All occurences of 2^29 in the source have been eliminated, so indexing
  and querying against reference sequences larger than 512Mbp works (when
  using CSI indices)

* Support for plain GZIP compression in various places

* VCF header editing speed improvements

* Added seq_nt16_int[] (equivalent to the samtools API's bam_nt16_nt4_table)

* Reinstated faidx_fetch_nseq(), which was accidentally removed from 1.1.
  Now faidx_fetch_nseq() and faidx_nseq() are equivalent; eventually
  faidx_fetch_nseq() will be deprecated and removed [#156]

* Fixed bugs #141, #152, #155, #158, #159, and various memory leaks