We are done with our Group Placard which is due on Monday. Also I wrote my individual 30 second script.
Below is the link to my Individual 30 sec Script and group Placard.
I connected my sensors and i ran the command sudo ./ghmain. My Light sensor is working well but there is a problem in temperature sensor. It is showing the same temperature on all the reading.
My humdity sensor is also working now. Below is the picture of output of the sensor.
I tested all my sensors (Temperature, Humidity and Light).LED attached on the PCB Board is also blinking.
Here I am showing my blinking LED and sensors working in a picture below.
I am testing my sensors. On 28th november I tested my project sensor but it was not working. I tried to check the pins again with a diagram provided on the web and realised that even though my code was taking an input from pin 29, my sensor was giving the output to pin 31, and i missed that fact because of the close approximity of those two pins. When i realised that, I changed my pin and then my sensor worked well.
The parts which i ordered for my project delivered. I came to college to work on my PCB board.
In this week I submitted my Budget. I also start ordering my stuff for the project.
In this week I submitted my Project Schedule and I started working on Budget. By this time we also made our Groups.
In this week I submitted my Project Proposal and I brought my Parts kit to class.
In this week we had an individual Quiz and I made an account on Github