Skip to content

Latest commit

 

History

History
56 lines (39 loc) · 1.99 KB

README.md

File metadata and controls

56 lines (39 loc) · 1.99 KB
Raw

GPD Pocket and GPD Pocket 2 hardware configuration for Ubuntu

A couple of scripts for GPD Pocket and GPD Pocket 2 Ubuntu users.

  • gpd-pocket-ubuntu.sh: installs the required hardware configuration on a running Ubuntu install.
  • gpd-pocket-ubuntu-respin.sh: respin and existing Ubuntu .iso image add inject the required hardware configuration.

GPD Pockets

NOTE! Both scripts have only been tested on Ubuntu MATE 18.10. It is unlikely they will work completely on Ubuntu if your use Wayland. Almost certainly that only work reliably on one of the Ubuntu 18.10 (or newer) flavours.

Pre-configured image

The Ubuntu MATE team offers a bespoke image for the GPD Pocket and GPD Pocket 2 that includes the hardware specific tweaks to get these devices working "out of the box" without any faffing about.

gpd-pocket-ubuntu.sh

Install one of the Ubuntu 18.10 (or newer) flavours on a GPD Pocket or GPD Pocket 2 and run the following to inject the required hardware configuration.

git clone https://github.com/wimpysworld/gpd-pocket2-ubuntu.git
cd gpd-pocket2-ubuntu
sudo ./gpd-pocket-ubuntu.sh enable || disable

You must supply one of the following modes of operation

  • enable : apply the GPD Pocket hardware configuration
  • disable : remove the GPD Pocket hardware configuration
  • help : This help.

gpd-pocket-ubuntu-respin.sh

git clone https://github.com/wimpysworld/gpd-pocket2-ubuntu.git
cd gpd-pocket2-ubuntu
  • Download an .iso image for one of the Ubuntu 18.10 (or newer) flavours.
  • Edit gpd-pocket-ubuntu-respin.sh and update the ISO_IN= with the full path the .iso your downloaded.
sudo ./gpd-pocket-ubuntu-respin.sh

A new .iso will be created that includes the additional hardware tweaks required by the GPD Pocket and GPD Pocket 2.