Mounting a DIP14 crystal on a lzx Cadet C1 SYNC GENERATOR modular.
The CSX750VCB13.500M-UT is no longer available. We can replace it with a custom DIP14 size crystal. So I made this adapter board to mount it on the original PCB.
| Designator | Qty | Value | Footprint | Description | References |
|---|---|---|---|---|---|
| parts soldered to cadet c1 | |||||
| 2x3PIN 2.54mm Male Connector(SMT) | 1 | Male Connector | SMT | Male Connector | 2x3PIN 2.54mm Male Connector(SMT) |
| parts soldered to adapter | |||||
| J1 | 1 | Female Connector | PTH | Female Connector | 2x3PIN 2.54mm Female Connector(PTH) |
| QG1 | 1 | Custom 13.50MHz VCXO Crystal | XO-14 | Custom 13.50MHz VCXO Crystal |
All Parts:
Soldering connector and crystal on adapter:
Soldering connector on Cadet C1:
Put them together:
Thanks to Eastwinder for finding the seller of this custom 5V VCXO crystal, which is hard to find these days.
This project is made available under a cc-by-sa-3.0 license.
https://github.com/lzxindustries/lzxcadet
Official website: https://biti.tech/