RaspiOpener

Open source project to remotely operate electronic door openers. You need to connect a raspberry pi (zero?) with a relay to the normal button that you use. The App to use with it is "DoorOpenerApp"

Installation Guide:

Install "RaspiOpener" "sudo java -jar AliveKeeper.jar" in new screen

• flash sd card with RaspberryOS Lite (https://www.raspberrypi.org/software/operating-systems/)

• copy your wpa-supplicant.conf and the ssh file on the boot partition Thats how the wpa-supplicant.conf file could look:

  country=[insert your country code here without the square brackets]
  update_config=1
  ctrl_interface=/var/run/wpa_supplicant
  
  network={
  ssid="MyTestNetwork"
  psk="Password"
  }

• install all required packages:

  sudo apt-get install openjdk-8-jdk -y & sudo apt-get install wiringpi -y & sudo apt-get install screen -y & sudo apt-get install git -y

• download the installer

  wget https://github.com/Kreck-Projekt/PiInstaller/releases/download/V1.0/installer.sh

• making the installer executable

  chmod +x installer.sh

• run the installer

  ./installer.sh

• create a new screen and execute the AliveKeeper.jar

  screen -S RaspiOpener
  sudo java -jar AliveKeeper.jar

  To exit hit Ctrl + A and then d

• now install the app and go through the init process in the app.(only android)
  Download Link: https://github.com/Kreck-Projekt/DoorOpenerApp/releases/download/v1.0/door-opener-release.apk

• If the initializing was succesful you should now open port 5000 in your network.

• After that change the IP-Addres in the app You can look up your public ip here: https://whatismyipaddress.com

  !Warning! After the reboot you must redo the last step

Developer Notes:

Command syntax:

Store Key: k:'key'
Store Password: p:('hash');'nonce'
Change Password: c:('oldHash';'newHash');'nonce'
Set new OTP: "s:('otp';'hash');'nonce'
Use OTP: e:'otp';'time'
Open: o:('hash';'time');'nonce'
Reset: r:('hash');'nonce'