Note
This project is only a temporary solution and currently only provides minimal maintenance. Parsec-vdd will directly provide a more complete solution, please continue to pay attention.
where find it？ 👉👉👉https://github.com/nomi-san/parsec-vdd
本项目仅作为一个临时解决方案，目前只提供最低限度的维护，Parsec-vdd将直接提供更完善的解决方案，请各位持续关注。
Create virtual displays in Windows with ease, supporting a range of resolutions and refresh rates (such as 4K 240Hz). Ideal for remote control or graphics card spoofing.
This project builds upon the ParsecVDD foundation and utilizes the repository found at https://github.com/nomi-san/parsec-vdd.
Please select the latest release version.
- Download and install the application. It is recommended to create a shortcut.
- Double-click to launch (virtualDisplayLit.exe, please make sure to run in administrator mode).
- The program will by default hide in the system tray at the bottom right corner, Right-click the icon to access the feature menu.On the initial run, install the driver (only required the first time).
- Then, click 'Start Virtual Display' to access the display settings via right-click on the desktop, just like configuring a physical monitor.
From top to bottom, the menu options are as follows: Start Virtual Display, Stop Virtual Display, Force Quit, Install Driver, Uninstall Driver, and Exit.
- Start Virtual Display
- Stop Virtual Display
- Force Quit
- Install Driver
- Uninstall Driver
- Exit
Privacy Screen (Remote Control/Streaming): After starting the virtual display, configure it to display only on Display 2 (Virtual Display) in the display settings. This will cause the host machine's screen to go black while the client machine displays the host's screen, allowing you to work discreetly without being detected by others.
Unrestricted creation of virtual displays with various resolutions and refresh rates, allowing the client to output user-preferred resolutions and refresh rates (such as 4K 240Hz) on low-performance displays or systems without a physical display.
轻松在Windows中创建虚拟显示器，支持各种分辨率和刷新率（如4k 244hz）。非常适用于远程控制或图形卡欺骗。
本项目基于ParsecVDD的基础构建，并利用了位于https://github.com/nomi-san/parsec-vdd的存储库。
请选择最新发布版本。
- 下载并安装应用程序。建议创建快捷方式。
- 双击启动（virtualDisplayLit.exe），请确保以管理员模式运行。
- 该程序默认隐藏在右下角系统托盘中，右键单击图标即可访问功能菜单。首次运行时，请安装驱动程序（仅首次运行）。
- 然后，单击“启动虚拟显示器”以通过在桌面上右键单击来访问显示设置，就像配置物理显示器一样。
从上到下，菜单选项如下：启动虚拟显示器、停止虚拟显示器、强制退出、安装驱动、卸载驱动和退出。
- 启动虚拟显示器：正常启动（首次运行前务必安装驱动）
- 停止虚拟显示器：正常停止
- 强制退出：某些情况下驱动可能会出现占用导致虚拟显示器启动不正常，此时可以先启用强制退出功能，确保驱动异常占用不是本程序导致的，然后卸载重装驱动或修复驱动
- 安装驱动：首次启动务必先安装驱动！！！首次启动务必先安装驱动！！！首次启动务必先安装驱动！！！
- 卸载驱动：卸载驱动
- 退出：退出程序
启动虚拟显示器后，在显示设置中设置仅在显示器2（虚拟显示器）上显示，此时被控端（host）将黑屏，控制端（client）将正常显示被控端（host）的画面，允许你成为卷王而不被其他人发现。
无限制的创建各种分辨率和各种刷新率的虚拟显示器，允许被控端在低性能显示器或无显示器搭载的情况下，控制端输出用户喜好的分辨率和刷新率（如4K 240Hz）。