prelecture_07_conductors_and_capacitance
- Today will extend our study of electric potential to
- Conductors
- Capacitance
- We will introduce this topic
- Last time we introduced Electric Potential
- [\Delta V_{A \rightarrow B} = -\int\limits_{A}^{B}{ \vec E \cdot d \vec l}]
- All example shown had fixed charge distrobutions, today we will introduce conductors without a fixed charge distrobution. * Conductors where the charges are free to move
- After discussing non-uniform charge distrobution in a conductor, we go on to discuss capacitance
- Specifically we discuss parallel plates
- [C \equiv \frac{ Q}{ \Delta V}]
- Field betwee plates [E = \frac{ Q}{ \varepsilon_0 A}]
- [V_B - V_A = -\int\limits_{A}^B}{ \vec E \cdot d \vec l}]
- [V_B - V_A = 0]
- Since [\vec E = 0] everywhere within the conductor
- This implies that the entire conductor it self is an equipotential
- When the conductor is circularly symmetric, the field lines are perpendicular to the surface
- When we change the shape such that it is no longer circularly symmetric the charge density redistributes such that we have varying points of charge density
A solid elliptical conductor with a net charge [Q] is surrounded by a hollow spherical conductor with net charge [-Q]. Points [a] and [c] are on the outer surface of the inner conductor, and points [b] and [d] are on the inner surface of the outer conductor as shown.
Compare [V_{ab}], the magnitude of the potential difference between points [a] and [b], to [V_{cd}], the magnitude of the potential difference between points [c] and [d].
- [V_{ab} = V_{cd}]
- Since each conductor is an equipotential, the potential difference between any point on the inner conductor and any point on the outer conductor has to be the same.
-
Consider two conducting spheres which are seprerated by a large distance and have radius' [R_A] and [R_B = 4 R_A]
-
Calculating the potential at the surface of [A]
- [V_A = -\int\limits_{\infty}^{R_A}{ \vec E_A \cdot d \vec l}]
- [V_A = -\int\limits_{\infty}^{R_A}{ k \frac{ Q}{ r^2} d r}]
- [V_A = k \frac{ Q}{ R_A}]
-
Repeat for sphere [B]
- [V_B = k \frac{ Q}{ R_B}]
- [V_B = k \frac{ Q}{ 4 R_A}]
- [V_B = \frac{ 1}{ 4} V_A]
- What if we connect the sphere's via a thin wire?
- The charges will in essence become a single conductor
- Their charges will flow until the come to the same potential.
- [V_A = V_B]
- [k \frac{ Q_A}{ R_A} = k \frac{ Q_B}{ R_B}]
- [k \frac{ Q_A}{ R_A} = k \frac{ Q_B}{ 4 R_A}]
- [\frac{ Q_A}{ R_A} = \frac{ Q_B}{ 4 R_A}]
- [Q_A = \frac{ Q_B}{ 4}]
- [ 4 Q_A = Q_B]
- [ Q_A + Q_B = 2 Q]
- [ Q_A = \frac{ 2}{ 5} Q]
- [ Q_B = \frac{ 8}{ 5} Q]
- Note
- Even though sphere [B] has four times the charge of sphere [A] the charge density on sphere [A] is still larger.
- [4 Q_A = Q_B]
- [4 \sigma_A Area_A = \sigma_B Area_B ]
- [4 \sigma_A 4 \pi R_A^2 = \sigma_B 4 \pi R_B^2 ]
- [4 \sigma_A R_A^2 = \sigma_B R_B^2 ]
- [4 \sigma_A R_A^2 = \sigma_B (4 R_A)^2 ]
- [4 \sigma_A R_A^2 = \sigma_B 4^2 R_A^2 ]
- [4 \sigma_A = \sigma_B 4^2]
- [\sigma_A = \sigma_B 4]
- [\sigma_A = 4 \sigma_B]
- Uncharged spherical conducting shell with a positive charge placed in the cavity.
- The presence of the positive charge will cause the charges in the conducting
shell to move so as to preserve the zero electric field in the center
* QUESTION: This was an uncharged spherical shell, why is it worded this way in the prelecture??
- Consequently both surfaces of the shell receive an induced charge.
- [Q_{inner} = -q]
- [Q_{outer} = q]
- Should the charge at the center of the sphere move to the right
- Inner surface charge distribution changes accordingly.
- Outer surface charge distribution stays the same.