The Simplest Node.js CMS & SSG!
A tiny flame in the darkness of error...
Important
This documentation no longer represents the diverse features of Blog-Doc. Kindly consult the comprehensive documentation for up-to-date information on Blog-Doc's functionalities.
- A zero code configuration static site generator.
- Ready to use as a Node.js CMS.
- Without any unnecessary functionalities, loads in a blink of an eye.
- Easy to install and use.
- Responsive, elegant and simple layout.
- Ready to use template for blog and/or documentation.
- Easy to modify if you opt for another design.
- Administrate your app from the front-end!
- Themes to change the look and feel of your site! (COMING SOON TO SPACE)
- Gallery to upload your images
- Create, Read, Update & Delete your pages and posts
- Paginated blog with chosen number of posts per page
- Posts pagination to navigate between your posts
- Write your content in Markdown
- Ability to use HTML in Markdown
- Tag(s) for posts
- Featured image for posts and pages
- Archive route for posts
- Tags list route
- Individual route for each tag
- Titles & Meta Descriptions
- Drag and drop your menu links to sort them
- RSS feed
- Sitemap
- Search
- Code highlighting with highlight.js
- Ids for H2 till H4 in Markdown
- No need for hot reloading in development mode (INFO FOR DEVELOPERS)
To install Blog-Doc on Space, head over its installation page and click on the Install App button.
Once installed, open the app from your Horizon or by accessing the builder instance of the app and clicking on the Open Builder Instance button.
You will be redirected to the app's address and see in your browser the following message: Route Not Found.
Please don't freak out! I've tried some other ways, but this is the simplest and most secure one.
Now assuming that your instance of Blog-Doc has the following address:
https://abc-1-x234.deta.app, in the address bar of your browser.
Add after it /admin-blog-doc-config, the address is now:
https://abc-1-x234.deta.app/admin-blog-doc-config, hit enter.
You'll be redirected to a page that will guide you on setting the main configuration to begin using Blog-Doc, 2 easy steps of 2 minutes.
At the end you'll submit a form, it takes at most 30 seconds to upload the configuration, then you'll be redirected to the initial address https://abc-1-x234.deta.app and see once again: Route Not Found.
Again don't panic! Just add `/pages/documentation`` after the address. Browse inside the app for a minute (time for the code to interact with the newly created drive) without visiting the home route, then go to the main route and begin to use your own instance of Blog-Doc 🎉
If it doesn't work from the first time do it again once more and it will.
siteURL value before deploying the application.
Nota Bene : the live URL MUST end with a slash /
Of course, you MUST also modify siteTitle, siteDescription and rssCopyright in the Settings page.
You SHOULD replace the siteTitle, siteDescription and rssCopyright values with the ones of your site.
You MAY replace the rssSiteLanguage value with the language of your site.
A list of available language codes can be found on the RSS language codes page.
Like the RSS feed, you MUST provide the live URL of your site in the Settings page by modifying the siteURL value to generate the correct links for each page, post, tag and template as well as for the blog routes.
Please remember that the Site URL MUST end with a slash /
You can check the sitemap of your site under the /sitemap route.
Blog-Doc has a built-in search feature.
The search functionality allows a user to make a research on the titles and the contents of the posts.
You can check the search of your site under the /search route.
You can disable the search in the Node.js app as well as for the generated static site by giving searchFeature a value of false in the Site Settings page.
Blog-Doc uses highlight.js to highlight block of code.
To write inline code, surround your code with backticks ``.
To highlight it, provide the language for the inline code by putting after it a curly braces with the alias of the language of the code.
The following examples will give you a better idea.
Assuming this css line p : color { red }, to highlight it you'll write `p { color: red }`{language=css}.
The code is surrounded with backticks `` and followed by {language=alias of code language}.
To write a block of code, surround your block with a pair of 3 backticks ```.
To highlight it, provide the alias of the language for the block just after the first 3 backticks.
We'll take the previous example and highlight it as a block :
```css
p { color: red }
```
We'll get the following output :
p {
color: red;
}Visit the Supported Languages of highlight.js to get the correct alias if you're unsure.
Alternatively, you can write a block of code without providing an alias, highlight.js will automatically detect the language.
If the highlighter fails to detect the correct language for a block of code without an alias, just add the desired language to the block as indicated above.
Adding an id attribute to a heading tag, H2 till H4 only, is an optional activated feature by default.
This feature was built with edge cases and typing typos in mind :
- Regex to match curly braces ignoring everything before the last hashtag
- Replace accented characters, by their non accented letter
- Replace upper case letters by lower case one
- Remove special characters except hyphen and underscore
- Replace any number of underscore by one hyphen
- Replace any number of space by one hyphen
- Remove any number of hyphen at the beginning
- Replace any number of hyphen by one hyphen only
- Remove any number of hyphen at the end
To add an id, add a curly braces with a hashtag followed by the id's text.
The following examples will give you a better idea :
<!-- Heading tags with an id property -->
## My awesome H2 title {# my-awesome-h2-title}
The HTML output will be : <h2 id="my-awesome-h2-title">My awesome H2 title</h2>
### My awesome H3 title {# my awesome h3 title}
The HTML output will be : <h3 id="my-awesome-h3-title">My awesome H3 title</h3>
#### My awesome H4 title {# My awesome H4 title}
The HTML output will be : <h4 id="my-awesome-h4-title">My awesome H4 title</h4>Every Whitespace is automatically replaced by a hyphen and any number of consecutive hyphens are replaced by one hyphen only.
Any number of hyphen at the beginning or the end of the id's text are removed so the following is also valid :
## My awesome H2 title { # ----- My ----- aWEsOMe ----- h2 ----- tITlE ----- }
Whatever the number of whitespace characters / hyphens is at the beginning,
between the words or at the end, the HTML output will still be :
<h2 id="my-awesome-h2-title">My awesome H2 title</h2>Anything before the last hashtag is ignored and special characters in the id's text are ignored too :
## My awesome H2 title { /!@# a comment ?%^& # -my= awesome+ h2 \ ( title ) | }
The HTML output will be : <h2 id="my-awesome-h2-title">My awesome H2 title</h2>& will be parsed to amp (ampersand)
" will be parsed to quot (quotation)
> will be parsed to gt (greater then)
< will be parsed to lt (less then)As an example :
## Honey & Bees {#Honey & Bees}
The HTML output will be : <h2 id="honey-amp-bees">Honey & Bees</h2>If you wish to disable this feature, set the addIdsToHeadings value to false in the Site Settings page.
Since Blog-Doc turned into a CMS, I've planned to add a gallery and a way to retrieve images for the pages and posts directly.
Now it's almost done. Almost, because there is always space to bring on improvements.
For now, you can visit the gallery by hitting the /admin/gallery/images route, or go to the Administration page and click on the Gallery link in the menu or it's card.
In the global spirit of Blog-Doc, The Galley is pretty simple to use.
You'll find a drop zone where you can drop your image(s) or click on it and choose the image(s) you wish to upload.
You can also delete an image from the gallery by clicking on it's ✘ DELETE button.
Finally, to assign an image to a page or a post, you can, while creating or updating, choose an image from the gallery by selecting it directly from the page or post.
(coming soon to Space)
You can switch between themes and choose the design that suites your needs.
Blog-Doc comes with:
- A default theme based on the Responsive Side Menu Layout of Pure.css
- A clean-blog theme based on Clean Blog from Start Bootstrap
If a picture is worth a thousand words, a video is worth a million!
A 30 seconds video showing the ability to instantly change the look and feel of your site with Blog-Doc.
I'll be adding more themes to Blog-Doc over time.
If you've coded a theme for Blog-Doc and wish to list it among the available themes, you can let me know in the Discussions of Blog-Doc's repository under the Ideas category.
Please keep in mind that Blog-Doc themes MUST only use plain JavaScript and cannot contain any code or image(s) that have publishing and/or distribution restrictions!
With all due respect to the time and hard work of every developer who made a Static Site Generator with Node.js, including the previous versions of Blog-Doc, those are gasworks!
I offer my sincerest apologies in advance to each one of these developers, but an app is not supposed to be a gasworks...
While the following posts are no more relevant to the actual version of Blog-Doc they explain quite well my motivation and may shock you.
Please read From 145 to 7 💪
Also read The New Blog-Doc
Also read node_modules is not heavy, developers are lazy!
- Node.js 16.x or higher.
- Velocy, A blazing fast, minimal backend framework for Node.js .
- Eta, lightweight, powerful, pluggable embedded JS template engine.
- Marked, Markdown parser and compiler. Built for speed.
- formidable, The most used, flexible, fast and streaming parser for multipart form data.
- And deta for the Drive SDK.
Blog-Doc for Space now uses only 14 modules (1916.1 KB or 1.9161 MB) instead of 131 (10082 KB or 10.082 MB)!
I have an issue!
Go to the Issues page of Blog-Doc Space on GitHub and create a New issue by explaining as much as possible the problem you're facing.
I have an idea!
Go to the Ideas of Blog-Doc Space on GitHub and tell me about it.
Why the SSG is not in Blog-Doc on Space?
Including the SSG in Blog-Doc on Space requires some architecture modifications.
I'll consider later on to include the SSG or not depending on Blog-Doc's usage and requirements on Space.
When I open the app I get: Route Not Found!
Please read the installation section.
I intend to make a lot of improvements to this app in my short free time.
You can take Blog-Doc as a prototype and modify it totally to use it with another design and/or another template language.
I really hope that this app will be useful in any way for a lot of people out there, I'm considering it as my personal contribution to the Node.js and Markdown communities.
Ideas, comments and suggestions are most welcome.
SYA, LebCit
Built with ❤️ by LebCit