strings-swedish

<resources>
    <string name="click_next_for_setup">Klicka Nästa för att starta</string>
    <string name="try_again_text">Försök igen</string>
    <string name="continue_text">Fortsätt</string>
    <string name="connecting_please_wait">Ansluter. Vänligen vänta…</string>
    <string name="connection_server_failed">Anslutning till server misslyckades</string>
    <string name="connection_server_failed_message">Anslutningen till Home Assistant misslyckades. Dubbelkolla URL / IP och försök igen.</string>
    <string name="ok_text">OK</string>
    <string name="connection_success_text">Anslutningen lyckades</string>
    <string name="enter_assistant_password">Fyll i uppgifter för Home Assistant</string>
    <string name="password_text">Lösenord</string>
    <string name="incorrect_password_message_text">Lyckades inte att logga in med uppgifterna. Dubbelkolla uppgifterna och försök igen.</string>
    <string name="setup_complete_text">Installation klar</string>
    <string name="setup_complete_message_text">Installationen av Home Assistant lyckades. Du kan nu använda appen för att styra Home Assistant.</string>
    <string name="configure_text">Konfigurera</string>
    <string name="connection_server_failed_splash">Misslyckdes med att ansluta till Home Assistant. Du kan försöka att ansluta igen eller konfigurera servern igen. Vad vill du göra?</string>
    <string name="server_not_configured_text">Server är inte konfigurerad</string>
    <string name="server_not_configured_message_text">Home Assistant är inte konfigurerad ännu. Vill du ställa in den?</string>
    <string name="title_activity_dashboard">Dashboard</string>
    <string name="navigation_drawer_open">Öppna navigation</string>
    <string name="navigation_drawer_close">Stäng navigation</string>
    <string name="action_settings">Inställningar</string>
    <string name="location_enable_text">Aktivera plats</string>
    <string name="wifi_enable_text">Aktivera Wifi</string>
    <string name="wifi_state_connected">ANSLUTEN</string>
    <string name="wifi_state_connecting">ANSLUTER</string>
    <string name="wifi_state_disconnected">FRÅNKOPPLAD</string>
    <string name="wifi_state_disconnecting">KOPPLAR IFRÅN</string>
    <string name="wifi_choose_message">Välj ditt hemma Wi-Fi-nätverk som Home Assistant också använder. Det kommer att användas senare för att veta om det nätverk du är ansluten till är hemma, eller inte. Svep neråt för att uppdatera listan med Wi-Fi-nätverk om du inte ser rätt nätverk.</string>
    <string name="searching_wifi_networks">Söker efter Wi-Fi-nätvker…</string>
    <string name="home_text">HEMMA</string>

    <string name="button_scene_activate">aktivera</string>
    <string name="climate_current_temperature" formatted="true">Nuvarande: %1$.1f %2$s</string>
    <string name="media_player_stop_toast">Stoppar…</string>

    <string name="location_permission_required">För att fortsätta behöver du ge tillgång till Platsrättigheter för appen. Vill du aktivera det manuellt?</string>
    <string name="yes_text">JA</string>
    <string name="no_text">NEJ</string>
    <string name="skip_text">Hoppa över</string>
    <string name="connect_text">Anslut</string>
    <string name="server_connection_lost_message">Anslutningen till Home Assistant har tappats. Kolla din nätverksanslutning och tryck på anslut för att försöka igen.</string>
    <string name="contact_text">Kontakt</string>
    <string name="about_text">Om</string>
    <string name="open_web_ui_text">Öppna Web-UI</string>
    <string name="logbook_text">Loggbok</string>
    <string name="rate_app_text">Betygsätt App</string>
    <string name="enter_external_ip">Fyll i extern Home Assistant IP / URL och Port</string>
    <string name="ip_url_text">IP / URL och Port</string>
    <string name="external_access_text">Extern tillgång</string>
    <string name="external_access_message">För att ställa in extern tillgång till Home Assistant anslut till ett annat nätverk än hemmanätverket(eg: 3G / 4G / andra nätverk). Kom ihåg att för att det ska fungera måste du ha öppnat för Home Assistant att bli ansluten till i din router. Konsultera manualen för routern för hur du öppnar en port och styr den till rätt enhet. </string>
    <string name="cancel_text">Avbryt</string>
    <string name="off_text">Av</string>
    <string name="idle_text">Idle</string>
    <string name="media_players_text">Mediaspelare</string>
    <string name="server_not_running_text">Lyckades inte ansluta till Home Assistant</string>
    <string name="air_pressure_text">Lufttryck: </string>
    <string name="humidity_text">Luftfuktighet: </string>
    <string name="wind_speed_text">Vindhastighet: </string>
    <string name="choose_sensor_text">Välj</string>
    <string name="no_sensors_messages">Kan inte lägga till sensor-widget eftersom det inte finns några konfigurerade sensorer.</string>
    <string name="remove_ads">Ta bort annonser</string>
    <string name="no_zone_message">Vi kunde inte hitta någon zone entity i din Home Assistant-konfiguration. Kolla din konfiguration.</string>
    <string name="ads_disabled_message">Tack! Annonser har inaktiverats.</string>
    <string name="video_ad_failed_load">Misslyckades med att ladda videoannonser. Försök igen senare.</string>
    <string name="remove_ads_text_info">För att ta bort annonser krävs det att man kollar på ett reklamklipp först. Vill du fortsätta?</string>
    <string name="exit_text">Exit</string>
    <string name="map_text">Karta</string>
    <string name="server_config_text">Serverkonfiguration</string>
    <string name="logout_text">Logga ut</string>
    <string name="locked_text">Låst</string>
    <string name="unlocked_text">Öppen</string>
    <string name="target_temperature">Måltemperatur</string>
    <string name="operation_text">Funktion</string>
    <string name="away_mode_string">Bortaläge</string>
    <string name="default_notification_channel_id">Ihållande notis</string>
    <string name="firebase_notifications_enabled">Firebase-notiser har aktiverats</string>
    <string name="firebase_notifications_failed">Misslyckades med att aktivera Firebase-notiser. Dubbelkolla att HANotify är installerat på Home Assistant</string>
    <string name="lovelaceui_failed_to_enable">Misslyckades med att ladda Lovelace UI. Dubbelkolla att Lovelace är installerat på servern.</string>

    <string name="firebase_notifications_disabled">Firebase-notiser har inaktiverats</string>
    <string name="firebase_notifications_disabled_failed">Mosslyckades med att inaktivera Firebase-notiser på denna enhet. Dubbelkolla att HANotify är installerad på Home Assistant</string>
    <string name="show_all_text">Visa Alla</string>
    <string name="show_groups_text">Visa Grupper</string>
    <string name="setting_firebase_summary">Tillåt Home Assistant server sända push-notiser till telefonen via Firebase. För mer informationgå till https://github.com/MCrissDev/HANotify</string>
    <string name="setting_firebase_title">HANotify Firebase-notiser</string>

    <string name="setting_webui_summary">När det här valet är aktiverat kommer Web UI att bli förhandsva istället för den inbyggda Android-vyn.</string>
    <string name="setting_webui_title">Web UI</string>

    <string name="setting_autoreconnect_summary">När det här valet är aktiverat kommer Ariela att försöka återuppta to kontakten med servern var 10:e sekund om anslutningen försvinner.</string>
    <string name="setting_autoreconnect_title">Återanslut automatiskt</string>

    <string name="settings_permanent_notification_title">Permanent Notis</string>
    <string name="settings_permanent_notification_summary">Visa en permanent notis när Ariela är ansluten till servern</string>

    <string name="settings_lovelaceui_title">Lovelace UI</string>
    <string name="settings_lovelaceui_summary">Använd Lovelace UI istället för standardvyn</string>
    <string name="settings_debugmode_title">Debug Mode</string>
    <string name="settings_debugmode_summary">Aktivera / Inaktivera Debug Mode</string>

    <string name="settings_device_tracker_title">Platsspårning</string>
    <string name="settings_device_tracker_summary">Aktivera / Inaktivera platsspårning för denna enhet</string>

    <string name="settings_phone_name_summary">Namn på denna enhet att visa för Home Assistant-server.</string>
    <string name="settings_phone_name_title">Enhetsnamn</string>
    <string name="get_pro_version_text">Skaffa PRO</string>
    <string name="choose_text_size">Välj textstorlek</string>
    <string name="choose_text">Välj</string>
    <string name="trigger_text">TRIGGER</string>
    <string name="debug_mode_activated">Debug Mode aktiverat</string>
    <string name="debug_mode_deactivated">Debug Mode inaktiverat</string>
    <string name="debug_mode_failed">Misslycakdes med att aktivera Debug Mode</string>
    <string name="device_tracker_failed">Misslyckdes med att aktiver platsspårning</string>
    <string name="notifications_string">Notiser</string>
    <string name="common_string">Vanliga</string>
    <string name="ui_string">UI</string>
    <string name="others_string">Andra</string>
    <string name="away_text">Borta</string>
    <string name="home_status_text">Hemma</string>

    <string-array name="array_setting_theme">
        <item>Förvalt</item>
        <item>Mörk</item>
        <item>Lila</item>
        <item>Mörkgrön</item>
        <item>Dark Gray</item>
    </string-array>

    <string-array name="array_setting_tracker_position">
        <item>1 meter</item>
        <item>10 meter</item>
        <item>50 meter</item>
        <item>100 meter</item>
        <item>300 meter</item>
        <item>500 meter</item>
    </string-array>

    <string-array name="array_setting_tracker_time">
        <item>30 sekunder</item>
        <item>1 minut</item>
        <item>5 minuter</item>
        <item>15 minuter</item>
        <item>30 minuter</item>
        <item>1 timme</item>
    </string-array>

    <string-array name="array_setting_tracker_type">
        <item>GPS</item>
        <item>Wi-Fi</item>
    </string-array>

    <string name="device_tracker_type_title">Platsläge</string>
    <string name="device_tracker_type_summary">Välj metod för att informera Home Assistant om enhetens plats</string>

    <string name="device_tracker_position_title">Uppdatera Position</string>
    <string name="device_tracker_position_summary">Välj positionsändring i meter för när platsuppdateringar ska skickas</string>

    <string name="device_tracker_period_title">Updateringsintervall</string>
    <string name="device_tracker_period_summary">Välj tidsintervall för hur ofta platsinformation ska skickas</string>

    <string name="web_login_text">Webbinloggning</string>
    <string name="please_wait_text">Vänligen vänta…</string>
    <string name="title_activity_map_viewer">Karta</string>

    <string name="hours_ago_text">%d timmar sedan</string>
    <string name="hour_ago_text">%d timme sedan</string>

    <string name="minutes_ago_text">%d minuter sedan</string>
    <string name="minute_ago_text">%d minut sedan</string>

    <string name="seconds_ago_text">%d sekunder sedan</string>
    <string name="config_validation_text">Kontrollera konfiguration</string>
    <string name="config_valid_message_text">Kontrollera din konfiguration om du nyligen gjort ändringar och vill dubbelkolla att allt stämmer</string>
    <string name="check_config_text">Kolla konfiguration</string>
    <string name="config_valid_text">Konfiguration är korrekt</string>
    <string name="config_invalid_text">Konfiguration är inte korrekt</string>
    <string name="failed_to_check_config">Misslyckades med att kolla konfiguration. Försök igen senare</string>
    <string name="config_reload_text">Konfiguration laddas om</string>
    <string name="config_reload_msg_text">Vissa delar av Home Assistant kan startas om utan starta om servern. Tryck på ladda omför att starta om just den komponenten. </string>

    <string name="reload_core_text">Ladda om core</string>
    <string name="reload_groups_text">Ladda om grupper</string>
    <string name="reload_automations_text">Ladda om automationer</string>
    <string name="reload_scripts_text">Ladda om skript</string>
    <string name="service_has_been_called">Tjänsten har blivit anropad</string>

    <string name="server_management_text">Serverhantering</string>
    <string name="server_management_message_text">Kontrollera din Home Assistant-server…från Ariela.</string>
    <string name="restart_text">Starta om</string>
    <string name="stop_text">Stopp</string>
    <string name="brightness_text">Ljusstyrka</string>
    <string name="rgb_color_text">RGB-färg</string>
    <string name="unknown_text">Okänd</string>
    <string name="users_text">Användare</string>
    <string name="users_config_summary">Hantera användare</string>
    <string name="general_text">Generellt</string>
    <string name="general_config_summary">Validera din konfigurationsfil och ta kontroll över servern</string>
    <string name="delete_text">Ta bort</string>
    <string name="failed_to_retrieve_users">Misslyckades med att hämta användare. Försök igen senare.</string>
    <string name="something_went_wrong">Något gick fel</string>
    <string name="unable_to_delete_own_account">Du kan inte ta bort ditt eget konto</string>
    <string name="alarm_code_text">Kod</string>
    <string name="arm_home_text">AKTIVERA HEMMA</string>
    <string name="arm_away_text">AKTIVERA BORTA</string>
    <string name="disarm_text">STÄNG AV</string>

    <string name="theme_text">Tema</string>
    <string name="theme_summary">Välj hur Ariela ska se ut och kännas</string>

    <string name="low_text">Låg</string>
    <string name="normal_text">Normal</string>
    <string name="cold_text">Kall</string>
    <string name="connected_text">Ansluten</string>
    <string name="disconnected_text">Bortkopplad</string>
    <string name="open_text">Öppen</string>
    <string name="closed_text">Stängd</string>
    <string name="gas_detected_text">Gas detekterad</string>
    <string name="clear_text">Klar</string>
    <string name="hot_text">Het</string>
    <string name="light_detected_text">Ljus detekterat</string>
    <string name="no_light_text">Inget ljus</string>
    <string name="wet_text">Våt</string>
    <string name="dry_text">Torr</string>
    <string name="motion_detected_text">Rörelse detekterat</string>
    <string name="no_motion_text">Ingel rörelse</string>
    <string name="moving_text">Rörelse pågår</string>
    <string name="stopped_text">Stoppad</string>
    <string name="occupied_text">Upptagen</string>
    <string name="plugged_in_text">Inkopplad</string>
    <string name="unplugged_text">Ej inkopplad</string>
    <string name="power_text">Ström</string>
    <string name="no_power_text">Ingen ström</string>
    <string name="problem_detected_text">Problem upptäckt</string>
    <string name="no_problem_detected_text">Inga Problem</string>
    <string name="unsafe_text">Osäker</string>
    <string name="safe_text">Säker</string>
    <string name="smoke_detected_text">Rök detekterat</string>
    <string name="sound_detected_text">Ljud detekterat</string>
    <string name="vibration_detected_text">Vibration detekterat</string>

    <string name="mqtt_string">MQTT</string>
    <string name="enable_mqtt_text">Aktivera MQTT</string>
    <string name="enable_mqtt_summary">Skicka dina enhetssensorer till Home Assistant</string>
    <string name="mqtt_sensors_text">Sensorer</string>
    <string name="mqtt_sensors_summary">Välj vilka sensorer du vill skicka till din MQTT-mäklare</string>

    <string name="battery">Batteri</string>
    <string name="battery_message">Skicka batteriinformation</string>

    <string name="light">Ljus</string>
    <string name="light_message">Skicka ljussensor</string>
    <string name="step_counter">Stegräknare</string>
    <string name="step_counter_message">Skicka stegräknare</string>
    <string name="instructions_text">Instruktioner</string>

    <string name="wi_fi_message">Skicka nätverksinformation (Wi-Fi)</string>

    <string name="clear_current_config">Rensa nuvarande konfiguration</string>
    <string name="current_external_config_cleared">Nuvarande tillgång via extern anslutning har återställts</string>
    <string name="call_state">Samtalstillstånd</string>
    <string name="call_state_message">Skicka information om den här enhetens samtalstilstånd (call state)</string>

    <string name="copy_to_clipboard">Kopiera till minnet</string>
    <string name="instructions_copied_to_memory">Instruktioner kopierat till minnet</string>

    <string name="setup_mqtt_first">Ställ in MQTT först för att kunna använda detta</string>

    <string name="discovery_topic">MQTT-prenumeration</string>
    <string name="discovery_topic_message">Värde för automatiskt bli upptäckt av MQTT</string>

    <string name="mqtt_topic">Rubrik</string>
    <string name="mqtt_payload">Meddelande (template tillåten)</string>
    <string name="publish_text">Publicera</string>
    <string name="publish_a_packet_text">MQTT: Publicera ett paket</string>

    <string name="time_text">Ändra tid</string>
    <string name="date_text">Ändra datum</string>
    <string name="add_item_text">Lägg till</string>
    <string name="checked_items">Valda</string>

    <string name="ambient_temperature">Temperatur omgivning</string>
    <string name="ambient_temperature_message">Skicka omgivningens temperatur</string>

    <string name="pressure_text">Lufttryck</string>
    <string name="pressure_message">Skicka lufttryck</string>

    <string name="user_text">Användare</string>
    <string name="setting_keepscreenon_summary">Om detta alternativ är aktiverat kommer Ariela dashboard att hålla skärmen vaken</string>
    <string name="setting_keepscreenon_title">Håll skärmen vaken</string>

    <string name="shopping_list_text">Inköpslista</string>
    <string name="text_to_speek">Text till tal</string>
    <string name="send_text">Skicka</string>
    <string name="input_source">Källa</string>
    <string name="sound_mode">Ljudläge</string>

    <string name="bluetooth_text">Blåtand</string>
    <string name="bluetooth_mqtt_text">Skicka blåtandsinformation</string>

    <string name="relative_humidity">Relativ luftfuktighet</string>
    <string name="relative_humidity_message">SKicka relativ luftfuktighet</string>

    <string name="apps_mqtt_text">Sensor med installerade appar på denna enhet</string>
    <string name="apps_text">Appar</string>

    <string name="setting_fullscreen_summary">Om detta alternativ är aktiverat kommer Ariela att visas i helskärmsläge</string>
    <string name="setting_fullscreen_title">Helskärmsläge</string>
    <string name="no_voice_recognition">Ingen röstigenkänning installerad</string>

    <string name="states_text">Tillstånd</string>
    <string name="effects_text">Effekter</string>
    <string name="color_temp_text">Färgtemperatur</string>
    <string name="title_text">Titel</string>
    <string name="icon_text">Ikon</string>
    <string name="url_path_text">URL</string>
    <string name="view_configuration">Visa Konfiguration</string>
    <string name="save_text">Spara</string>
    <string name="settings_text">Inställningar</string>
    <string name="badges_text">Märke</string>
    <string name="activate_text">Aktivera</string>
    <string name="execute_text">Exekvera</string>
    <string name="setting_scrolllongtext_title">Skrolla Lång Text</string>
    <string name="setting_scrolllongtext_summary">Om detta är aktiverat kommer text som är för lång för att visas i sin helhet att skrolla automatiskt istället för att bli förkortad</string>

    <string name="vacuum_cleaner_commands">Dammsugarkommandon:</string>
    <string name="notifications_empty">Inga notiser</string>
    <string name="dismiss_text">Avfärda</string>
    <string name="failed_to_retrieve_shopping_list">Misslyckades med att ladda inköpslistan. Dubbelkolla att komponenten är aktiverad på servern.</string>
    <string name="entity_editor_text">Enhetsredigerare</string>
    <string name="message_toast_failed_to_save_entity_info">Misslyckades med att spara enhet</string>

    <string-array name="array_setting_cards_column">
        <item>Auto</item>
        <item>1 kolumn</item>
        <item>2 kolumner</item>
        <item>3 kolumner</item>
        <item>4 kolumner</item>
    </string-array>

    <string name="number_of_columns_cards">Kortkolumner</string>
    <string name="number_of_columns_cards_info">Välj hur många kolumner som korten ska visas på.</string>

    <string name="debug_enabled_message">Debug mode har aktiverats. Starta om appen och försöker återskapa buggen du hittade. Efter det, för att kunna skicka en loggfil till oss, använd kontaktfunktionen inuti Ariela och välj din e-post-app. Loggfilen kommer att bifogas automatiskt. Om det inte sker finns det en fil på din telefon so heter  \'ariela_logfile.log\'. Bifoga den i ett mejl till: \'micro.criss.dev@gmail.com\'.</string>
    <string name="picture_text">Bild</string>

    <string name="create_notification">Skapa notis</string>
    <string name="message_text">Meddelande</string>
    <string name="create_text">Skapa</string>

    <string name="service_text">Tjänst</string>
    <string name="services_text">Tjänster</string>
    <string name="services_summary_text">Tjänsten utvecklarverktyg låter dig kalla på valfri tjänst tillgänglig i Home Assistant.</string>
    <string name="service_data_text">Tjänstdata (JSON, valfri)</string>
    <string name="call_service_text">Kör tjänst</string>

    <string name="intro_text">Introduktion</string>
    <string name="previous_text">Föregående</string>
    <string name="next_text">Nästa</string>
    <string name="enter_local_network_info_message">Vänligen fyll i uppgifter om ditt hemmanätverk (WiFi)</string>

    <string name="enter_wifi_home_name">Fyll i namnet på ditt hemma-WiFi. När Ariela är ansluten till detta nätvker kommer den använda den lokala adressen till Home Assistant. Det här nätkverket kommer också att användas för att informera Home Assistant att du är hemmma när Ariela är ansluten till detta nätverk.</string>
    <string name="wifi_name_hint">WiFi-namn</string>

    <string name="please_enter_wifi_name">Ange ett giltigt WiFi-namn.</string>
    <string name="local_ip_address">Home Assistant IP-adress</string>
    <string name="local_ip_address_msg">Ange IP-adress till Home Assistant IP. Om det inte är tillgängligt för tillfället kan du ange din externa adress istället om du ställt in så att du kan ansluta utifrån.</string>
    <string name="check_connection_text">Testa anslutning</string>
    <string name="external_ip_address_msg">Ange extern adress till Home Assistant. Om du inte tillåter externa anslutningar till din server kan du bara trycka på \"Hoppa över\" för att fortsätta</string>
    <string name="credentials_message">Ange namn och lösenord. Om du använderHome Assistant 0.78 eller tidigare kan du lämna fälten tomma och sedan logga in via API_PASSWORD. Om du har problem med inloggning eller använder 2FA använd webbinloggningen istället.</string>
    <string name="home_wifi_network_choose">WiFi-nätverksväljare</string>

    <string name="nfc_text">NFC</string>
    <string name="nfc_summary_text">Läs och skicka NFC-taggar till Home Assistant</string>

    <string name="mqtt_client">MQTT Client</string>
    <string name="mqtt_client_summary">Välj förvald MQTT-klient</string>

    <string-array name="array_setting_mqtt_client">
        <item>HomeAssistant</item>
        <item>Inbyggd</item>
    </string-array>

    <string name="configure_build_in_mqtt_title">Konfigurera inbyggd MQTT-klient</string>
    <string name="configure_build_in_mqtt_title_summary">Dessa inställningar låter dig konfigurera den inbyggda MQTT-klienten</string>
    <string name="mqtt_setup_title">MQTT Inställningar</string>

    <string name="local_mqtt_address">Lokal MQTT-adress och port</string>
    <string name="external_mqtt_address">Extern MQTT-adress och Port</string>
    <string name="mqtt_connection_succeeded">MQTT-anslutning lyckades</string>
    <string name="mqtt_connection_failed">MQTT-anslutning misslyckades. Dubbelkolla inställningarna och försök igen.</string>
    <string name="mqtt_connection_external_failed">MQTT-anslutning till externt IP misslyckades. Dubbelkolla inställningarna och försök igen.</string>

    <string name="mqtt_setup_address_message">   Ange IP-adressen och port till MQTT-mäklaren.\n   Om du inte har tillgång till ditt lokala nätverk kan du ange den externa adressen för den lokala anslutningen.\n   Om du inte vill koppla upp dig mot MQTT när du inte är hemma lämna externt IP blankt.\n   Om du använder SSL behöver du ange \"ssl://\" istället för \"tcp://\" innan IP-adressen.</string>
    <string name="back_camera">Bakkamera</string>
    <string name="back_camera_summary">Skicka bilder från bakkamera</string>

    <string name="front_camera">Frontkamera</string>
    <string name="front_camera_summary">Skicka bild från frontkameran</string>
    <string name="enable_camera_permission">Tillåt appen att hantera kameran för att använda denna funktion.</string>

    <string name="common_text">Vanlig</string>

    <string name="wear_successfully_sync">Användaruppgifter har synkroniserats.</string>
    <string name="wear_failed_sync">Misslyckades med att synkronisera Wear användaruppgifter.</string>

    <string name="tts_text">Text till tal</string>
    <string name="tts_mqtt_summary">Aktivera detta för att låta din telefon omvandla text till tal´</string>

    <string name="server_connection_text">Server connection</string>
    <string name="server_setting_read_timeout_title">Read timeout</string>
    <string name="server_setting_read_timeout_summary">Choose timeout value when reading data from the socket.</string>

    <string name="server_setting_connect_timeout_title">Connect timeout</string>
    <string name="server_setting_connect_timeout_summary">Choose timeout value when trying to connect to socket.</string>

    <string name="alarm_text">Alarm</string>
    <string name="alarm_summary">Send this device time when the next alarm will be triggered</string>

    <string name="start_app_boot">Start at boot</string>
    <string name="start_app_boot_summary">Automatic start Ariela when the device start-up.</string>

    <string name="ariela_available_mqtt_sensor">Ariela Availability</string>
    <string name="ariela_available_mqtt_sensor_summary">Enable this to see time when Ariela last communicated with Home Assistant</string>

    <string name="notification_entities_empty">Go to Settings -> Notifications in order to add some entities here.</string>
    <string name="notification_entities_title">Notification Entities</string>
    <string name="notification_entities_summary">Choose entities that should appear in notification</string>
    <string name="notification_entities_max_reached">Maximum entities to display reached. Delete an existing entity and try again.</string>
    <string name="choose_entity_text">Choose Entity</string>

    <string name="internal_ip">Internal IP</string>
    <string name="internal_ip_summary">Use this option to modify the local IP where the HA instance can be found</string>

    <string name="external_ip">External IP</string>
    <string name="external_ip_summary">Use this option to modify the external IP where the HA instance can be found</string>

    <string name="force_vertical_stack">Force vertical behaviour</string>
    <string name="force_vertical_summary">When this option is enabled, Horizontal Stack cards will behave like vertical ones</string>

    <string name="bluetooth_headphone">Bluetooth Headphone</string>
    <string name="bluetooth_headphone_summary">Send Bluetooth Headphone connected device information</string>

    <string name="bluetooth_a2dp">Bluetooth Media</string>
    <string name="bluetooth_a2dp_summary">Send Bluetooth Media (A2DP) connected device information</string>

    <string name="paused_text">paused</string>

    <string name="start_app_update">Start after update</string>
    <string name="start_app_update_summary">Automatic start Ariela when application get\'s updated.</string>
    <string name="logout_text_info">Are you sure you to logout? Current connection info will be cleared.</string>

    <string name="home_assistant_servers">Home Assistant servers</string>
    <string name="home_assistant_servers_summary">Manager Home Assistan servers </string>
    <string name="create_server_text">Create Server</string>
    <string name="default_text">Default</string>
    <string name="error_create_server_text">Please enter a valid server name in order to continue.</string>
    <string name="active_server_cannot_delete">The active server cannot be deleted.</string>

    <string name="certificate_message_info">If you server connection requires custom certificates like PCKS12 you may enter here the path of the certificate to be used. This is useful when having your Home Assistant server running over NGINX for example.</string>
    <string name="please_enter_certificate_path">Use search button to enter the certificate path:</string>
    <string name="search_text">Search</string>
    <string name="choose_certificate">Choose Certificate</string>
    <string name="enter_certificate_password">If required, enter the certificate password:</string>

    <string name="use_internal_ip_home_ap">Use internal IP when connected to a Home AP</string>
    <string name="use_internal_ip_home_ap_summary">If this option is enabled, when Ariela detects you are connected to a home AP, internal IP will be used for connection.</string>

    <string name="sending_nfc_tag">Sending NFC TAG: %s</string>

    <string-array name="array_setting_mqtt_camera_resolution">
        <item>Low</item>
        <item>Medium</item>
        <item>High</item>
    </string-array>

    <string name="mqtt_camera_resolution">MQTT Camera Resolution</string>
    <string name="mqtt_camera_resolution_summary">Choose the MQTT Camera Resolution</string>

    <string name="states_dev_summary">Set the representation of a device within Home Assistant. This will not communicate with the actual device. </string>
    <string name="set_state_text">Set State</string>
    <string name="entity_text">Entity</string>
    <string name="state_text">State</string>
    <string name="state_attributes">State Attributes (JSON, optional)</string>

    <string name="notification_entity_show_value_text">Notification entity state</string>
    <string name="notification_entity_show_value_summary">If this option is enabled, entities that are shown in notification will display its current value instead of its name</string>

    <string name="active_server_cannot_be_deleted">The active server can\'t be deleted. Switch to another server in order to do this action.</string>

    <string name="web_ui_swipe_tabs">WebUI tabs swap</string>
    <string name="web_ui_swipe_tabs_summary">Enable this option in order to change tabs in Web UI mode by swap left / right</string>

    <string name="delete_server_title">Delete Server</string>
    <string name="delete_server_confirmation">Are you sure you want to delete \"%s\"?</string>

    <string name="switch_server_title">Switch Server</string>
    <string name="switch_server_confirmation">Are you sure you want to switch HA connection to \"%s\"?</string>
    <string name="switch_server_already_active">This server is already active</string>

    <string name="mobile_app_notification">Mobile APP Notification</string>
    <string name="mobile_app_notification_summary">Click here to see notification example</string>

    <string name="web_ui_scroll_refresh_title">WebUI Scroll Down Refresh</string>
    <string name="web_ui_scroll_refresh_summary">Enable this option in order to allow scroll down to refresh option</string>

    <string name="horizontal_card_items">Horizontal-Stack items count</string>
    <string name="horizontal_card_items_summary">Select the number of items horizontal-stack card should show.</string>
    <string name="auto_text">Auto</string>

    <string name="mqtt_sensor_notification_grabber">Notifications Grabber</string>
    <string name="mqtt_sensor_notification_grabber_message">Send notifications content from other applications to Home Assistant.</string>
    <string name="permission_text">Permission Required</string>
    <string name="notification_grabber_permission_required">In order this function to work you need to give Ariela permission to access other applications notification. Do you wish to continue?</string>

    <string name="info_text">Info</string>
    <string name="wifi_network">WiFi Network</string>
    <string name="certificate_text">Certificate</string>
    <string name="credentials_text">Credentials</string>
    <string name="add_user">Add User</string>
    <string name="name_text">Name</string>
    <string name="no_home_wifi_text">No Home Wi-Fi networks</string>

    <string name="failed_to_load_ads_message">Failed to load advertisement. If you like this app consider purchasing PRO version in order to help further development of the app. Thank you!</string>

    <string name="mqtt_retain_message">MQTT Retain</string>
    <string name="mqtt_retain_summary">Inform MQTT broker to keep last messages</string>

    <string name="mobile_app_credentials_force">Force Mobile App credentials</string>
    <string name="mobile_app_credentials_force_summary">Force Ariela to redo Mobile App connection.</string>
    <string name="disable_notification_message">Please go to Settings -> Apps -> Ariela in order to disable notifications.</string>
    <string name="mobile_app_force_failed">Failed to force Mobile App integration</string>
    <string name="mobile_app_force_succeeded">Mobile App force integration is successful</string>
    <string name="mobile_app_text">Mobile APP</string>

    <string name="sensors_disabled_text">All sensors had been disabled. Please re-enable the sensors in order to have Ariela sensors updated.</string>
    <string name="mobile_app_credential_force_warning">In order to not have duplicates, you should go to Home Assistant -> Integrations and delete this device. Do you wish to continue deleting this device?</string>
    <string name="vibrate_ui_controls_title">Vibrate UI controls</string>
    <string name="vibrate_ui_controls_summary">Create vibration feedback whenever you toggle a switch, button etc</string>

    <string name="setting_device_tracker_mobile_app">Device Tracker - Mobile App</string>
    <string name="setting_device_tracker_mobile_app_summary">Enable updating device tracker created by Mobile APP</string>
    <string name="setting_device_tracker_see">Device Tracker - See</string>
    <string name="setting_device_tracker_see_summary">Enable updating device tracker using See service</string>

    <string name="wear_battery_sensor">Wear Battery</string>
    <string name="wear_battery_sensor_message">Send Android Wear battery level</string>

    <string name="device_tracker_accuracy_title">Accuracy</string>
    <string name="device_tracker_accuracy_message">Do not send GPS location if accuracy (in meters) is higher then this value. Put 0 (zero) to send GPS location for any accuracy.</string>

    <string name="allow_background_running">Allow background running</string>
    <string name="allow_background_running_summary">If this option is enabled, Ariela will be allowed to run in background. This is useful if you want to receive entities updates in realtime but its possible to consume more battery.</string>

    <string name="entity_registry_text">Entity Registry</string>
    <string name="entity_registry_summary">Overview of all known entities.</string>
    <string name="failed_to_retrieve_entities_message">Failed to retrieve entities list. Please try again later.</string>

    <string name="heart_rate_text">Heart Rate</string>
    <string name="heart_rate_summary">Send Heart Rate information sensor to Home Assistant</string>
    <string name="enable_body_sensors_permission">Please enable Body Sensors permission in order to use this function.</string>

    <string name="wear_heart_rate_sensor">Wear Heart Rate</string>
    <string name="wear_heart_rate_message">Send Android Wear heart rate sensor info.</string>

    <string name="vpn_connection_text">VPN Connection</string>
    <string name="vpn_connection_summary">If this option is enabled, the internal IP address will be used for communicating with Home Assistant.</string>
    <string name="device_tracker_update_mode">Update Mode</string>

    <string name="notification_vibrate_title">Vibrate</string>
    <string name="notification_vibrate_summary">Vibrate whenever a push notification is shown.</string>
    <string name="notification_notification_lights">Lights</string>
    <string name="notification_notification_summary">Enable light whenever a push notification is shown.</string>
    <string name="push_notifications_text">Push Notifications</string>

    <string name="language_text">Language</string>
    <string name="language_setting_summary">Choose application language.</string>

    <string-array name="array_setting_language_column">
        <item>English</item>
        <item>German</item>
        <item>Spanish</item>
        <item>Italian</item>
        <item>Norwegian</item>
        <item>Dutch</item>
        <item>Polish</item>
        <item>Portuguese</item>
        <item>Romanian</item>
        <item>Russian</item>
        <item>Swedish</item>
        <item>French</item>
        <item>Chinese</item>
    </string-array>

    <string name="language_changed_dialog_message">Please restart the application in order to have the changes applied.</string>

    <string name="attention_text">Attention</string>
    <string name="web_ui_enable_mode_message">In order to return to native Ariela or access the Ariela settings, please swipe right from the left display margin.</string>
    <string name="push_notifications_text_aa">Android Auto Push Notifications</string>
    <string name="add_wifi_text">Add WiFi</string>
    <string name="zone_text">Zone</string>
    <string name="wifi_name_cannot_be_empty">WiFi name cannot be empty</string>
    <string name="settings_wifi_home_title">WiFi &amp; Zones</string>
    <string name="settings_wifi_home_summary">When you will be connected to one of the listed networks, Ariela will inform Home Assistant that your device is at the assigned zone location.</string>
    <string name="screen_state_summary">Send information if screen is off or on</string>
    <string name="screen_state_text">Screen State</string>
    <string name="preset_text">Preset</string>
    <string name="notification_settings_text">Push Notification Settings</string>
    <string name="notification_settings_summary">Change notification sound, vibration mode etc.</string>
    <string name="fan_mode">Fan Mode</string>
    <string name="swing_mode">Swing Mode</string>
    <string name="accelerometer_text">Accelerometer</string>
    <string name="accelerometer_sensor_summary">Send accelerometer sensor informations to Home Assistant</string>

    <string name="device_tracker_distance_title">Distance between locations</string>
    <string name="device_tracker_distance_message">Do not send GPS location if the distance (in meters) between previous location send to Home Assistant and the new location received from GPS is less then the set value. Put 0 (zero) to send GPS location for any distance.</string>
    <string name="proximity_sensor">Proximity Sensor</string>
    <string name="proximity_sensor_summary">Send proximity sensor information to Home Assistant</string>

    <string name="rtsp_camera_text">MJPEG Camera Streaming</string>
    <string name="rtsp_camera_enable_text">Enable MJPEG Camera streaming</string>
    <string name="rtsp_camera_enable_summary">Enable MJPEG Camera streaming. Note that having this function enabled will make MQTT camera not to work.</string>
    <string name="configuration_text">Configuration</string>
    <string name="streaming_source_text">Stream Source</string>
    <string name="streaming_source_summary">Choose camera streaming source</string>

    <string-array name="array_setting_rtsp_stream_source">
        <item>Back Camera</item>
        <item>Front Camera</item>
    </string-array>

    <string name="streaming_setup_instructions_title">Setup Instructions</string>
    <string name="streaming_setup_instructions_summary">Click here to view how to integrate streaming with Home Assistant</string>
    <string name="stream_port_text">Stream Port</string>
    <string name="stream_port_summary">Choose a unique port where the Ariela will create and stream the mjpeg data</string>
    <string name="jpeg_compression_quality">Compression Quality</string>
    <string name="jpeg_compression_quality_summary">Choose a value from 10 – 100 that will represent the JPEG compression quality.</string>
    <string name="mjpeg_stream_resolution">Stream Resolution</string>
    <string name="mjpeg_stream_resolution_summary">Choose the video resolution of the stream.</string>
    <string name="webui_startup_page">WebUI Startup Page</string>
    <string name="webui_startup__page_summary">Put the page number (or name) on which Web UI mode will start. Default is 0 (zero) which represent home or first tab.</string>

    <string name="error_log">Error Log</string>
    <string name="error_log_summary">Check Home Assistant errors log.</string>
    <string name="error_log_retrieve_toast">Failed to retrieve error history. Please try again later.</string>
    <string name="error_log_no_issues">There are no new issues!</string>

    <string name="speech_recognizer">Speech Recognizer</string>
    <string name="speech_recognizer_summary">Use your phone to send voice controlled instructions to Home Assistant</string>

    <string name="quick_settings_web_ui">Quick Settings</string>
    <string name="quick_settings_web_ui_summary">Enable Quick Settings button when using Web UI.</string>

    <string-array name="array_setting_tracker_priority">
        <item>Wifi &amp; Cell</item>
        <item>GPS</item>
        <item>No Power</item>
    </string-array>

    <string name="device_tracker_priority_title">Priority</string>
    <string name="device_tracker_priority_summary">Choose the method how Ariela will going to retrieve the location.</string>

    <string name="flash_text">Flash</string>
    <string name="flash_summary">Enable Flash when streaming back camera.</string>

    <string name="sensor_motion_detector">Motion Detection</string>
    <string name="sensor_motion_detector_summary">Enable Motion Detection when streaming MJPEG camera</string>

    <string name="mobile_app_notification_setting_title">Push Notifications - Mobile App</string>
    <string name="mobile_app_notification_setting_summary">Enable / disable push notifications of mobile_app component</string>

    <string name="device_tracker_ignore_wifi_setting">Ignore WiFi &amp; Zones</string>
    <string name="device_tracker_ignore_wifi_setting_summary">When using GPS tracking, ignore WiFi &amp; Zones detection. Use this function to rely only on GPS data.</string>

    <string name="unsupported_lovelace_card">Unsupported Card</string>
    <string name="unsupported_lovelace_card_message">\"%s\" lovelace card is not supported yet. Please request adding it via email. Thank you!</string>

    <string name="disable_unsupported_cards">Render Unsupported Card</string>
    <string name="disable_unsupported_cards_summary">If this option is enabled, a card will appear when a Lovelace card is not supported.</string>

    <string name="enable_microphone_permission">Please enable Record permission in order to use this function.</string>
    <string name="sensor_microphone">Microphone Sensor</string>
    <string name="ssensor_microphone_summary">Enable Microphone Sensor for silence detection and more.</string>

    <string name="app_support_development">Support App Development</string>
    <string name="error_products_none">There are no products found! Error code is %s</string>
    <string name="subscriber_text">Subscribe \n %s / month</string>
    <string name="subscribing_success_text">Thank you very much for the subscription. As a gift the ads will be disabled for each month subscription is running.</string>

    <string name="useful_resources">Useful Resources</string>
    <string name="changelog_text">Changelog</string>
    <string name="documentation_text">Online Documentation</string>

    <string name="settings_password">Settings Password</string>
    <string name="settings_password_summary">Put settings password in order to not allow unauthorized access.</string>
    <string name="password_required">Password Required</string>
    <string name="enter_password_text">Please enter password to access settings</string>
    <string name="invalid_password_text">Invalid password! Please try again later.</string>

    <string name="arm_night_text">ARM NIGHT</string>
    <string name="arm_custom_bypass_text">CUSTOM BYPASS</string>
    <string name="unnamed_view_text">unnamed view</string>

    <string name="social_text">Social Links</string>
    <string name="facebook_text">Facebook</string>
    <string name="twitter_text">Twitter</string>
    <string name="patreon_text">Patreon</string>
    <string name="help_translate_app">Help App Translation</string>

    <string name="show_tabs_bottom_setting">Show Tabs on Bottom</string>
    <string name="show_tabs_bottom_setting_summary">Enable this option if you want tabs to be shown on bottom of the screen instead of top (useful for big screens)</string>

    <string name="background_image_text">Background Image</string>

    <string name="copy_certificate_text">Please copy your certificate to \"%s\". Due to Android 10 security policies, this cannot be automated unfortunately.</string>
    <string name="view_visible_in_ariela">Disable this view in Ariela</string>
    <string name="clear_hidden_lovelace_views">Clear Hidden Lovelace views</string>
    <string name="clear_hidden_lovelace_views_summary">Use this option in order to show again any hidden views in Ariela when using Lovelace mode.</string>

    <string name="independent_mqtt_session">Independent MQTT Session</string>
    <string name="independent_mqtt_session_summary">When this option is enabled and build-in MQTT client its used, the MQTT session will remain active even if connection to the HA server is broken.</string>

    <string name="ip_name_hint">IP</string>
    <string name="settings_wifi_ip_home_title">WiFi IP\'s &amp; Zones</string>
    <string name="settings_wifi_ip_home_summary">When you will be connected to one of the listed IP\'s, Ariela will inform Home Assistant that your device is at the assigned zone location.</string>

    <string name="invalid_date_text">Invalid Date</string>
    <string name="help_text">Help</string>
    <string name="certificate_choose_text">Does your server connection requires custom certificates like PCKS12? If yes, press \"Continue\" else please press the \"Skip\" button. </string>
    <string name="location_permission_text">This function requires location access permission in order to continue. Please allow that permission to Ariela in order to retrieve device location in the background and send regular updates to Home Assistant server. Do you wish to continue?</string>
    <string name="connection_local_ip_success_text_message">Connection to Home Assistant server is successful. Do you want to setup external IP also? Note that you can do setup the external IP at a later point from the app settings. What would you like to do?.</string>
    <string name="setup_external_ip_text">Setup External IP</string>
    <string name="use_web_login_option_text">or use WEB login</string>
    <string name="setup_location_text_2">In order to use location tracking features or different connection urls based on WiFi SSID, we need access to your location. If you want consistent background updates your will also need to allow background processing.</string>
    <string name="setup_location_text">This app collects location data in order to enable "Device Tracker" feature even when the app is closed or not in use. Please note that the location information is only sent to your hosted Home Assistant server and its not stored, logged or shared with another 3rd party. This data is also used to provide ads. Would you like to grant the Location permission to the app?</string>
    <string name="grant_permission_text">Grant Permission</string>
    <string name="background_location_not_active_text">Background location access was not granted. You can enable later this permission by going to phone settings. The application will be able to send location updates only while the app is in use.</string>
    <string name="permission_location_not_active_text">Location permission is not granted and device tracker capabilities were disabled. You can enable device tracker later using the app settings.</string>
    <string name="add_widget_text">Add Widget</string>
    <string name="powered_by_text">Powered by: </string>
    <string name="app_quick_launch">Ariela: Quick Launch</string>
    <string name="dashboards_text">Dashboards</string>
    <string name="device_name_text">Device Name</string>
    <string name="device_name_info">Please enter device name:</string>
    <string name="build_in_mqtt_options_text">Build-in MQTT Client options</string>
    <string name="overview_text">Overview</string>
    <string name="switch_dashboard_text">Switch Dashboard</string>
    <string name="switch_dashboard_info_text">Choose to switch dashboard only in this current app session or the dashboard should be also set as default.</string>
    <string name="switch_only_text">Switch Only</string>
    <string name="switch_setdefault_text">Switch &amp; set default</string>
    <string name="forecast_text">Forecast</string>
    <string name="edit_current_view_text">Edit Current View</string>
    <string name="native_rendering_text">Native Rendering UI</string>
</resources>