Skip to content

MahjongPantheon/pantheon

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Mahjong Pantheon: automated statistics & assistance for japanese riichi mahjong sessions.

You may use github issues for error reports and feature requests. Pull requests are especially welcome :)

Pantheon can be run in production or in development mode. Please don't use development build for your production setup.

Production build

Clone the pantheon repository to your own server. Make sure repo folder is not accessible for the outer world.

To deploy pantheon on your own VPS or personal environment on production mode:

  1. Make sure you have GNU Make installed on your system. Also one of the following should be installed:
    • Docker with compose plugin - to run containers via docker runtime
    • Podman-docker wrapper and podman-compose - to run containers over kubernetes setup.
      • If you're using podman, please make sure you have ip_tables module inserted into your kernel on the host. Otherwise, containers will fail to start.
      • Please note: if you're using podman, trying to stop a single service container will result in also stopping all containers it depends on. Docker has no such issue.
  2. Create new environment config file Env/.env.production. There are examples in Env folder. Fill the file with proper settings for your setup.
  3. Fill new environment file with proper values, mostly it's about hosts, where you want the services to be accessible from the outer internet. Please note: setting up Nginx or any other reverse proxy is your responsibility. You may refer to nginx-reverse-proxy.example.conf file for basic nginx setup.
  4. Set up your reverse proxy, add SSL certificates (optionally). Please use included nginx-reverse-proxy.example.conf as reference of what host to point where. Note that *.pantheon.internal hosts are used to distinguish the services inside container network. Optionally, you can also point PgAdmin4 host to port 5632.
  5. Run make pull to fetch fresh containers from registry.
    • As an option, you can run make container to build containers from scratch, but it's not recommended for production environment.
  6. Run make prod_start to start containers
  7. Run the following command: make prod_compile. This will build all static files for Tyr/Forseti/Sigrun and Sigrun server.
  8. If you're making a fresh setup, run make bootstrap_admin to bootstrap a super-administrator account (admin@localhost.localdomain with password 123456). Don't do this on database that already has users!
  9. Basically, you're done :)

To update code on production server you will need to do the following:

Quick way

Use make prod_update to fetch all changes from master branch. Please note that your setup and intentions must meet the following requirements:

  • You use git-based version of code (cloned repository)
  • You want to use code from master branch (please note - master is not always stable!)
  • You don't have any changes is your working copy (except Sigrun-dist/server.js - this file is a result of prod_compile). If there are any changes, they will be discarded. You can check changes in your working copy using git status command. Production environment config is excluded from git, so it's guaranteed to be left untouched.

Long way

Basically these are the same commands that are done inside make prod_update but performed one-by-one for better control.

  1. Get new code from the repository (e.g. run git fetch && git checkout origin/master in repo folder)
  2. Pull new containers using make pull
  3. Restart containers with make prod_restart (please use this exact command, otherwise email service will be started with wrong environment settings)
  4. Run make prod_compile to build newer versions of the static code.

If you ever change the environment variables in your current Env/.env.production file, you should also restart the containers using make prod_restart. After that, if VITE_* variables have been changed, you should also run make prod_compile for changes to take effect.

Please note that db and pgadmin containers are not restarted during make prod_restart. To stop these containers as well, use make prod_stop_all. This is rarely needed, though.

Email agent

Pantheon provides container with pre-installed email agent (Hermod). If you want to send emails signed with DKIM, you will need to place your private keys to Hermod/opendkim_keys folder. Also following setting are required:

  • Some unique key in MAIL_ACTION_KEY variable in your environment config.
  • Mailer root host in ALLOWED_SENDER_DOMAINS variable in your environment config. Mailer address also will be set to noreply@[allowed domain].

HTTPS

You may use bin/letsencrypt-scripts and nginx-reverse-proxy.example.conf as an example and reference to set up your SSL certificates using Let's Encrypt. If you're not intending to use https, please disable corresponding directives in your reverse proxy nginx config.

Setting up database backups

Pantheon provides built-in database backups using git. By default, it just stores database dump as new commits in /var/lib/postgresql/backup folder of the Database container (you can get to shell using make shell_db). If you want to set up some remote backups, you should do the following:

  • Set the BACKUP_GIT_REMOTE variable in your environment config to point to your backup remote repository. There is an example included in the env file.
  • Go to Database folder and call make backup_dump_pubkey command to get ssh public key.
  • Add this key to trusted keys in your account in Github, Gitlab or wherever your remote repository will reside.
  • Restart the containers with make prod_restart

Every 15 minutes the database dump is made. You may view history of backups using make backup_show_history in Database folder. To rollback your database to previous state you may use either included pgadmin4 container (running at 5632 port) or the one-liner command from the Database folder: COMMIT=1234567 make backup_restore, where 1234567 should be replaced with target commit hash (which can be found using make backup_show_history command). Please note that one-liner will rollback both mimir and frey databases!

Please note that backups will consume quite much disk space. To clean up some space you may consider deleting the /var/lib/postgresql/backup/.git directory and changing the BACKUP_GIT_REMOTE variable, followed by containers restart.

Development environment

Pantheon developer environment works on *nix hosts (mac, linux, *bsd). Windows-based systems are not supported (while it still MAY work, it is not tested at all, also you may want to try using it under WSL in Windows 10+).

Prerequisites

First, please add the following entries to your /etc/hosts file so you could access pantheon services locally:

127.0.0.1   bragi.pantheon.local
127.0.0.1   forseti.pantheon.local
127.0.0.1   frey.pantheon.local
127.0.0.1   gullveig.pantheon.local
127.0.0.1   hermod.pantheon.local
127.0.0.1   hugin.pantheon.local
127.0.0.1   mimir.pantheon.local
127.0.0.1   munin.pantheon.local
127.0.0.1   sigrun.pantheon.local
127.0.0.1   skirnir.pantheon.local
127.0.0.1   tyr.pantheon.local
127.0.0.1   pga.pantheon.local

Second, make sure your local port 80 is not used by any other software (like nginx, apache or another web server).

  • If the port is not used, everything should work as is. Please note that in this case Pantheon development environment will use port 80, and no other service using that port can be started until make pantheon_stop is run.
  • Otherwise, please refer to Common/ReverseProxy/external-proxy.example.conf file for a list of hosts configuration (for nginx). For other web servers, please use equivalent instructions. Modify configuration of your currently running web server to allow requests pass to the services from your local browser.
  • If there is some external nginx running inside docker container on your local machine, you can use Common/ReverseProxy/nginx.conf file to add pantheon configuration there. You'll also need to add the container to pantheon_internal_net docker network.

Installing and running

Make sure you have Docker and Docker Compose installed and daemon running on your system. For debugging, please make sure all the php extensions are installed as well, see Dockerfile for a complete list.

Note: on some linux distros almost every docker-related command should be run as root. If nothing happens, or error is displayed, try adding sudo before make.

  1. Run make pull to fetch all the containers from registry. This is optional, though, it will allow you to skip container build process.
    • As an option, you can run make container_dev to build containers from scratch on you local machine. This may take a long time.
  2. Run make dev to start all containers, install dependencies for all projects, run database migrations and start webpack dev servers for Tyr and Forseti.
  3. After everything is build, you can use make logs and make php_logs in each subsystem folder to view logs in real-time. Also you may use make shell to get to container shell, if you want to. Notice that killing php-fpm, postgres or nginx will ruin the container entirely.
  4. You can use make pantheon_stop to stop all containers (without deleting the data) and make kill to stop the container AND clean images (e.g. this will remove all db data).

Please note: if you're using podman, trying to stop a single service container will result in also stopping all containers it depends on. Docker has no such issue.

To create an event and fill it with some data, run make seed, make seed_bigevent or make seed_tournament (with sudo if required). Note that users are re-seeded on each command run.

A separate guide about debugging in PhpStorm IDE is available.

Local port 5532 will available for PostgreSQL connections - if you want to use external pgAdmin3/4 or any other client to access your databases.

Services will be available at:

Mimir and Frey use twirp interface to communicate with other services. See protocol description files in Common folder. Please note:

  • If you change the protocols, you should run make proto_gen in root repo folder to regenerate all protocol related code.
  • You always should change the proto files and never should change the generated code by hand.

End-to-end tests

Pantheon services include e2e testing framework based on Playwright. To run it locally, make sure pantheon development environment is running (make dev) and use make e2e_dev command in separate terminal window. Note that it will run tests against development build, so no SSR is tested locally.

If you want to test full production build locally, you may stop the development environment and use following commands:

make e2e_run
make e2e_compile
make e2e

Remember to remove all the files created during the run before committing changes.

Email agent

Pantheon provides container with pre-installed email agent (Hermod). You can view last sent email in CLI using make dump_last_mail command. This is useful to test registration and password recovery, because emails sent from the developer environment will most likely be rejected by target email relay (e.g. gmail rejects it in 100% of cases).

Notifications agent

Pantheon supports realtime notifications (currently only via Telegram, but Discord may also be added soon). To use this functionality you should register a bot in Telegram and set its nickname and secret token in Env/.env.production:

BOT_TOKEN=yourtoken
VITE_BOT_NICKNAME=bot_nickname

After that your users should open the bot, start the conversation and follow the link it sends. After pressing the confirmation button, bot will be enabled for this particular user.

Pull requests

Any pull request should pass all current code style checks; also all unit tests should pass. Don't forget to run make check (with sudo if required) before sending your pull request. To fix all code style issues automatically (in php code only), run make autofix (also sudo may be required).

External services

One may want to use Pantheon API in some own external service. Please make sure you have protoc v3.21.9-r0 so generated binary code matches our protocol version.