- CIC Prefix : TILT2
- Author : Katarina Perendic
- Verison : 1.0.0
- Date : dec 2018.
We provide a library for the Tilt2 Click on our LibStock page, as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Library Description
The library contains a tilt detection function.
Key functions :
uint8_t tilt2_tiltDetection()- Tilt detection
Examples Description
The application is composed of three sections :
- System Initialization - Sets INT pin as INPUT for tilt detection
- Application Initialization - Initialization driver init
- Application Task - (code snippet) - Tilt detection, if the tilt is detected, the message is logs on USBUART.
void applicationTask()
{
uint8_t tilt;
tilt = tilt2_tiltDetection();
if(tilt == _TILT2_TILT_DETECTION)
{
mikrobus_logWrite(" Tilt detection.. ", _LOG_LINE);
Delay_ms( 300 );
}
}The full application code, and ready to use projects can be found on our LibStock page.
Other mikroE Libraries used in the example:
- GPIO
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.