-
Hello. Im hoping to get help to recover my mib2 if possible. I installed M.I.B and probably did some bad stuff in there because my system now boots and get stuck on Radio screen. The car buttons are unresponsive only thing that works is reset. After some time 1-3 minutes the unit reboots. I can enter mmx via dlink adapter but not rcc. I can enter RCC with uart serial usb board. Here is the backup log Logging_MU1438-MHI2_ER_AUG22_K3346-JTB-07427.05.1611730A8E: ls --> total 2919 RCC-backup----> Found JTB-07427.05.1611730A8E Backup, will check if all complete... RCC-launcher----> RCC-backup----> Found JTB-07427.05.1611730A8E Backup, will check if all complete... MMX-fecel----> add FECs to FEC file from M.I.B backup folder copy FEC file from /patches/MHI2_ER_AUG22_K3346_MU1438_PATCH... -> done :-) MMX-fecel----> RCC-carp----> RCC-flash----> Found JTB-07427.05.1611730A8E Backup, will check if all complete... ls -als /net/mmx/mnt/boardbook --> total 192 search File MU1438-ifs-root-part2-0x00ba0000-7899EE00.ifs [flashlock] unlocking flash: DONEFlashing on OFFSET 0x00ba0000...
|
Beta Was this translation helpful? Give feedback.
Replies: 2 comments 2 replies
-
You flash process was interrupted. Can you still log into RCC via piutty and D-Link? |
Beta Was this translation helpful? Give feedback.
-
is MMX via telnet working? To fix this you have to flash ifs-root-stage2 manually. It can be the patched one directly. |
Beta Was this translation helpful? Give feedback.
is MMX via telnet working?
If so, see if /net/rcc/ can still be accessed.
Just a bit easier than UART.
To fix this you have to flash ifs-root-stage2 manually. It can be the patched one directly.
Most likely rcc will not be visible in /net/rcc/dev/fs0 in that case follow this:
https://mibwiki.one/doc/mount-rcc-fs0-6zJlPOu7Ml