-
Notifications
You must be signed in to change notification settings - Fork 3
Home
14.4.2021: gaitutils now supports Python 3.6+ only. You also need Nexus 2.12. If you still need Python 2 support, check out the py2 branch (will not be actively maintained).
Gaitutils can be used to extract, process and visualize gait data (marker data, model outputs, EMG data). It supports reading data from Vicon Nexus or directly from c3d files. Note that it is still under heavy development.
This is a 'quick start' guide to help with installation and use of the graphical interface. The Python API is not comprehensively documented but may be in the future, especially if I get requests for that.
Anaconda is the recommended distribution. Alternatively you can use Miniconda for a smaller download. It's recommended to install a 64-bit version with Python 3.6 or newer.
Conda supports a feature called environments. Each enviroment can have its own Python version and a set of packages.
Gaitutils comes with a conda enviroment file that allows you to conveniently install all required packages into an environment. If you want to install the packages manually, see the Appendix instead.
Open Anaconda Prompt from Windows menu. Download the environment specification by giving the command:
curl -O http://raw.githubusercontent.com/jjnurminen/gaitutils/master/environment.yml
Alternatively, if curl does not work, download environment.yml by visiting the link given in the above command and saving the file. Make sure that it is saved under the correct filename - the browser save dialog may change the name. Then create the environment by typing:
conda env create -f environment.yml
To activate the environment in Anaconda Prompt, type
conda activate gaitutils
This will activate the environment for the current session only. For instructions on how to activate it every time you open the shell, see the Appendix.
To use gaitutils with Vicon Nexus (version 2.12 and above), you need to install the viconnexusapi package that comes with Nexus. After activating the environment as above, give the following commands:
cd "C:\Program Files (x86)\Vicon\Nexus2.12\SDK\Win64\Python"
pip install ./viconnexusapi
After activating the environment, you can run
gaitmenu
to start the graphical user interface to gaitutils.
In the activated environment, type
gaitmenu_make_shortcut
An icon should appear on your desktop, which will start the menu in the correct environment.
The graphical interface allows plotting of trials from c3d files or a running Vicon Nexus instance. Click "Add session..." to add either tagged trials or all trials from a given session. Alternatively, "Add C3D files..." can be used to load C3D files via the OS file dialog.
The plot layout defines the variables to plot. Some common layouts such as Plug-in Gait come predefined with the software. You can also define your own layouts in the config (see below).
Two different plotting backends are currently supported: plotly and matplotlib. The Plotly backend creates interactive plots in a web browser and is somewhat more polished. The matplotlib package creates static plots that may be more useful for hardcopies (e.g. PDF reports).
In gaitutils, the trials of interest are marked by tagging. This means that you mark the Eclipse Notes or Description fields of the desired trials with specific strings. The default tag strings are "E1", "E2", "E3", "E4", "T1", "T2", "T3", "T4", but this can be changed in the config (see below).
The autoprocessing functionality is intended for processing of dynamic trials in gait sessions (may also work for running, but less tested). It works in conjunction with Vicon Nexus and performs the following tasks:
- run preprocessing pipeline(s)
- evaluate forceplate contact for each forceplate and mark the corresponding Eclipse database fields
- mark gait events (foot strike and toeoff)
- run dynamic model(s)
- write trial info (processing results) into Eclipse, e.g. Description or Notes field
You should first create two pipelines in Nexus, called "Preprocessing" and "Dynamic model". (These are default names for the preprocessing and model pipelines, but this can be configured). The preprocessing pipeline should yield filtered marker trajectories, i.e. it should perform reconstruct, label gap fill (if necessary) and filter operations. You may also want to filter analog (forceplate) data. The modeling pipeline should run any subsequent modeling operations, e.g. Plug-in Gait. Note that save operations are not needed in either pipeline (and they will unnecessarily slow down the processing).
NOTE: it has been found out that long pipelines with multiple operations may occasionally cause Nexus to crash. If you experience this, break your preprocessing pipeline into a set of several smaller pipelines and specify those in the configuration instead (see Options/Autoprocessing).
In Nexus Data management window, browse to the session you want to process. Make sure the static trial has been processed so that labeling will work for dynamic trials. Start up the gaitutils menu. Select "Autoprocess session" or "Autoprocess single trial". The event detection is more accurate when processing the whole session, since it uses session level statistics.
You can improve the accuracy of forceplate detection by including foot lengths into your subject info (labeling skeleton template). In Nexus, click on the subject and select "Add parameter..." Add parameters called RightFootLen and LeftFootLen with the unit set as mm. Empty out all parameters and save the labeling skeleton as a new template. When taking subject measurements, measure the maximum length of the foot (or shoe) from heel to toe.
The package includes simple PDF and web-based (interactive) gait reports. These can be created from the Reports menu. The report functionality requires tagging the trials of interest (see above). The tagged trials will be included into the report. Note that the reports are currently a bit specific to the Helsinki gait lab.
In addition to the graphical user interface, you can import the package in your own Python scripts. To try it out, launch e.g. the Spyder IDE that comes with Anaconda and run some of the examples below. Note that you have to start the Python interpreter in the gaitutils environment - if you installed Anaconda, the Windows menu should already have an entry that runs Spyder in the correct environment.
To do your own data processing in Python, you can extract trial data as numpy arrays.
Load a gait trial in Nexus. Run at least reconstruct, label and the Plug-in Gait model. Also mark some foot strikes and toeoffs (at least one gait cycle).
Loading the trial into Python:
from gaitutils import trial
tr = trial.nexus_trial()
print tr
Result:
<Trial | trial: 2018_11_14_seur_paljal_AH02, data source: <ViconNexus.ViconNexus instance at 0x000000000DE62648>, subject: Aamu, gait cycles: 6>
Extracting some marker data as Nx3 NumPy array:
t, mdata = tr.get_marker_data('RASI')
Extracting Plug-in Gait outputs:
t, mdata = tr.get_model_data('LPelvisAnglesX')
These will give frame-based data for the whole trial. t gives the frame number and has length equal to the data. To get data normalized to the first gait cycle, do:
t, mdata = tr.get_model_data('LPelvisAnglesX', 0)
Note that cycle numbering is 0-based. Now t is the percentage of gait cycle 0..100% and mdata is the normalized LPelvisAnglesX variable.
get_cycles can be used to get a specific gait cycle. For example, to normalize to first cycle with right context and forceplate contact, do:
cycles = tr.get_cycles({'R': 'forceplate'}) # returns all gait cycles on R that start with forceplate contact
cyc = cycles[0] # pick the 1st one
t, mdata = tr.get_model_data('LPelvisAnglesX') # extract cycle normalized data
The plotter supports a number of predefined layouts such as Plug-in Gait lower body kinematics. It handles normalization of data etc. This example plots lower body kinematics and kinetics from two c3d files using the matplotlib backend.
from gaitutils.viz import plots, show_fig
c3ds = ['data1.c3d', 'data2.c3d']
fig = plots.plot_c3ds(c3ds, layout_name='lb_kin', backend='matplotlib')
show_fig(fig)
The first import of the package (see 'Verification' above) should create a config file named .gaitutils.cfg in your home directory. You can edit the file to reflect your own system settings. You can also change config items from the graphical user interface (go to File/Options) and save either into .gaitutils.cfg (will be automatically loaded on startup) or some other file.
The most important settings to customize are described below, by section:
If you want to plot normal data for Plug-in Gait variables, edit normaldata_files to reflect the path to your normaldata file. .gcd and .xlsx (Polygon normal data export) file formats are supported.
Set devname to name of your EMG device shown in Nexus (for example 'Myon EMG'). When reading data from Nexus, analog devices cannot be reliably identified, except by name. This setting does not affect reading c3d files.
channel_labels has the following structure: {'ch1': 'EMG channel 1', 'ch2': 'EMG channel 2', ...} Edit ch1, ch2 etc. to match your EMG channel names (as shown in Nexus). Edit the descriptions as you desire. Partial matches for channel names are sufficient, e.g. if you have a channel named 'RGas14' in Nexus you can specify the name as 'RGas'. In case of conflicting names, a warning will be given and the shortest matching name will be picked.
default_model_cycles and default_emg_cycles specify which gait cycles to plot. The options are
-
'all': plot all gait cycles -
'forceplate': plot all cycles that begin on valid forceplate contact -
'1st_forceplate': plot first forceplate cycle -
0: plot first cycle (NOTE: explicit cycle numbering is zero-based!) - A list, e.g.
'[0,1,2]': plots first to third cycles - A tuple, e.g.
(forceplate, 0): plot forceplate cycles, or if there are none, first gait cycle
Set eclipse_write_key to e.g. 'DESCRIPTION' to automatically update Eclipse fields after processing. Set it to None if you want to leave the Eclipse fields alone. The enf_descriptions determines what to write into the Eclipse field.
Set events_range to limit automatically marked events to certain coordinate range in the principal gait direction.
Layouts defines the predetermined plotting layouts. Defaults include layouts such as
lb_kinematics = [['PelvisAnglesX', 'PelvisAnglesY', 'PelvisAnglesZ'],
['HipAnglesX', 'HipAnglesY', 'HipAnglesZ'],
['KneeAnglesX', 'KneeAnglesY', 'KneeAnglesZ'],
['AnkleAnglesX', 'FootProgressAnglesZ', 'AnkleAnglesZ']]
This would be 4 rows and 3 columns of PiG variables. Rows are inside the inner brackets, separated by commas. You can add your own layouts.
Currently, reading data from the following models is supported: Plug-in Gait upper and lower body, CGM2, Oxford foot model, muscle length. The variable names are not yet documented here, but see models.py for details.
To update, give the command
pip install --upgrade https://github.com/jjnurminen/gaitutils/archive/master.zip
Occassionally it may be beneficial or necessary to upgrade the dependencies as well. Unfortunately, there's currently no easy way to do this. The best way may be to simply delete the whole environment with
conda activate base
conda env remove -n gaitutils
and reinstall via conda env create -f environment.yml
Create a file called .bashrc in your home directory. Put the following lines there:
. /c/Anaconda2/etc/profile.d/conda.sh
conda activate gaitutils
These commands will activate the gaitutils enviroment whenever you open git bash. Change c/Anaconda2 to your Anaconda install directory. c is the drive letter.
gaitutils needs the btk package to read c3d files. A 64-bit version for Python 2.7 is bundled. If you prefer to run 32-bit Python, you need to install btk yourself.
Download and run the installer from https://pypi.python.org/pypi/btk/0.3#files. The btk installer always puts the package into the conda root environment. Thus, after installation you need to copy the folder C:\Anaconda2\Lib\site-packages\btk into C:\Anaconda2\envs\gaitutils\Lib\site-packages\btk (modify paths depending on where you installed Anaconda)
If you create new layouts in gaitutils.cfg, you need to restart gaitmenu. The layouts config tab cannot handle loading new layouts yet.