Skip to content

Latest commit

 

History

History

crc_single_data

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
Makefile
Makefile
 
 
README.md
README.md
 
 
main.c
main.c
 
 
npk.yml
npk.yml
 
 

README.md

Introduction

This example is based on RV-STAR board. It shows how to use CRC to calculate the CRC value.

How to use

Build and run using Nuclei SDK

Here are the steps build and run in Nuclei SDK using command line.

# clone nuclei-sdk repo and cd to it
git clone https://github.com/Nuclei-Software/nuclei-sdk
cd nuclei-sdk
# Setup nuclei tools environment following https://doc.nucleisys.com/nuclei_sdk/quickstart.html#setup-tools-and-environment
# Assume you are in Windows, and have create and setup the setup_config.bat file
# source the nuclei tool environment
setup.bat
# clone nuclei-board-labs
git clone https://github.com/Nuclei-Software/nuclei-board-labs
cd nuclei-board-labs/
# cd to this example
cd rvstar/crc/crc_single_data
# Build this example for nuclei rvstar board
## clean this example first
make SOC=gd32vf103 BOARD=gd32vf103v_rvstar clean
## build this example
make SOC=gd32vf103 BOARD=gd32vf103v_rvstar all
## connect rvstar board using USB dongle, and make sure driver is setup correctly
## see https://rvmcu.com/column-topic-id-464.html
## upload this example
make SOC=gd32vf103 BOARD=gd32vf103v_rvstar upload
## debug this example
make SOC=gd32vf103 BOARD=gd32vf103v_rvstar debug

Then you will see the green led on, which means the hardware CRC unit calculate the correct CRC value.

You can also refer to this guide for more details:

Build and run using other tools

If you are not familar with command line, you can also create projects using Nuclei Studio and PlatformIO IDE, put this example code in the IDE and then build, upload and debug on it.

Create a project

You can create a project in Nuclei Studio IDE, PlatformIO IDE or Segger Embedded Studio.

Copy the source code

Copy the main.c file from this directory and replace the existing application code in the IDE project directory.

Build and Upload

Connect RVSTAR board to your PC, build and upload the project and then you will see the green led on, which means the hardware CRC unit calculate the correct CRC value.

Reference