Skip to content

Latest commit

 

History

History
503 lines (377 loc) · 16.5 KB

INSTALL.md

File metadata and controls

503 lines (377 loc) · 16.5 KB
Raw

#Install Instructions

##Dependencies
Name Version Modules
Qt >= 5.2.0 core, gui, network, opengl, sql, svg, widget, xml
GCC/MinGW >= 4.8 C++11 enabled
toxcore most recent core, av
FFmpeg >= 2.6.0 avformat, avdevice, avcodec, avutil, swscale
OpenAL Soft >= 1.16.0
filter_audio most recent
qrencode >= 3.0.3
libXScrnSaver >= 1.2
##Linux ###Simple install Easy qTox install is provided for variety of distributions:

Generic

There are available generic binaries for Linux:

====

#### Arch

Please note that installing toxcore/qTox from AUR is not supported, although installing other dependencies, provided that they met requirements, should be fine, unless you are installing cryptography library from AUR, which should rise red flags by itself…

That being said, there are supported PKGBUILDs at https://github.com/Tox/arch-repo-tox

#### Gentoo

qTox ebuild is available in tox-overlay. To add it and install qTox you will need to have installed layman:

emerge layman

After that, add overlay and install qTox:

layman -f
layman -a tox-overlay
emerge qtox
 #### Slackware

qTox SlackBuild and all of its dependencies can be found here: http://slackbuilds.org/repository/14.1/network/qTox/

If your distribution is not listed, or you want / need to compile qTox, there are provided instructions.

Most of the dependencies should be available through your package manger. You may either follow the directions below, or simply run ./simple_make.sh after cloning this repository, which will attempt to automatically download dependencies followed by compilation.

Install git

In order to clone the qTox repository you need Git.

#### Arch Linux: ```bash sudo pacman -S --needed git ``` #### Debian / Ubuntu: ```bash sudo apt-get install git ``` #### Fedora: *`yum` is now officially deprecated by `dnf`. using `yum` will redirect to `dnf` on Fedora 21 and fail on future versions.* ```bash sudo dnf install git ``` ### openSUSE: ```bash sudo zypper install git ```

Clone qTox

Afterwards open a new Terminal, change to a directory of your choice and clone the repository:

cd /home/user/qTox
git clone https://github.com/tux3/qTox.git qTox

The following steps assumes that you cloned the repository at "/home/user/qTox". If you decided to choose another location, replace corresponding parts.

### GCC, Qt, FFmpeg, OpanAL Soft and qrencode #### Arch Linux: ```bash sudo pacman -S --needed base-devel qt5 openal libxss qrencode ffmpeg ``` #### Debian <10 / Ubuntu <15.04: **Note that FFmpeg is not included in those distribution version(!).**

This means that you have to compile FFmpeg yourself, otherwise compiling qTox will fail.

sudo apt-get install build-essential qt5-qmake qt5-default qttools5-dev-tools libqt5opengl5-dev libqt5svg5-dev libopenal-dev libxss-dev qrencode libqrencode-dev libglib2.0-dev libgdk-pixbuf2.0-dev libgtk2.0-dev

Go to FFmpeg section to compile it.

#### Debian >=10 / Ubuntu >=15.04: ```bash sudo apt-get install build-essential qt5-qmake qt5-default qttools5-dev-tools libqt5opengl5-dev libqt5svg5-dev libopenal-dev libxss-dev qrencode libqrencode-dev libavutil-ffmpeg-dev libswresample-ffmpeg-dev libavcodec-ffmpeg-dev libswscale-ffmpeg-dev libavfilter-ffmpeg-dev libavdevice-ffmpeg-dev libglib2.0-dev libgdk-pixbuf2.0-dev libgtk2.0-dev ``` #### Fedora: ```bash sudo dnf group install "Development Tools" sudo dnf install qt-devel qt-doc qt-creator qt5-qtsvg qt5-qtsvg-devel openal-soft-devel libXScrnSaver-devel qrencode-devel ffmpeg-devel qtsingleapplication ``` #### openSUSE: 
sudo zypper install patterns-openSUSE-devel_basis libqt5-qtbase-common-devel libqt5-qtsvg-devel libqt5-linguist libQt5Network-devel libQt5OpenGL-devel libQt5Concurrent-devel libQt5Xml-devel libQt5Sql-devel openal-soft-devel qrencode-devel libXScrnSaver-devel libQt5Sql5-sqlite libffmpeg-devel
 #### Slackware:

List of all the qTox dependencies and their SlackBuilds can be found here: http://slackbuilds.org/repository/14.1/network/qTox/

FFmpeg

If you have installed FFmpeg earlier (i.e. you don't run Debian <10 / Ubuntu <15.04), skip this section, and go directly to installing toxcore.

To get ffmpeg compiled and put in directory libs, run this script in qTox directory:

[ ! -e "libs" ] && mkdir libs   # create directory libs if doesn't exist
[ ! -e "ffmpeg" ] && mkdir ffmpeg

cd libs/
export PREFIX_DIR="$PWD"

cd ../ffmpeg
wget http://ffmpeg.org/releases/ffmpeg-2.7.2.tar.bz2
tar xf ffmpeg*
cd ffmpeg*


./configure --prefix="$PREFIX_DIR" \
            --enable-shared \
            --disable-static \
            --disable-programs \
            --disable-protocols \
            --disable-doc \
            --disable-sdl \
            --disable-avfilter \
            --disable-avresample \
            --disable-filters \
            --disable-iconv \
            --disable-network \
            --disable-muxers \
            --disable-postproc \
            --disable-swresample \
            --disable-swscale-alpha \
            --disable-dct \
            --disable-dwt \
            --disable-lsp \
            --disable-lzo \
            --disable-mdct \
            --disable-rdft \
            --disable-fft \
            --disable-faan \
            --disable-vaapi \
            --disable-vdpau \
            --disable-zlib \
            --disable-xlib \
            --disable-bzlib \
            --disable-lzma \
            --disable-encoders \
            --enable-memalign-hack   # rm that line for debug stuff


make -j$(nproc)
make install

cd ../../

filter_audio

This step is best done before compiling toxcore.

Now you can either follow the instructions at https://github.com/irungentoo/toxcore/blob/master/INSTALL.md#unix or use the bootstrap.sh script. The script will automatically download and install toxcore and libfilteraudio:

## in qTox directory
./bootstrap.sh # use -h or --help for more information

If you've used script, you can skip directly to compiling qTox.

If you want to compile and install it manually:

git clone https://github.com/irungentoo/filter_audio
cd filter_audio
make -j$(nproc)
sudo make install

toxcore dependencies

Install all of the toxcore dependencies.

#### Arch Linux: ```bash sudo pacman -S --needed opus libvpx libsodium ``` #### Debian >=8 / Ubuntu >=15.04: ```bash sudo apt-get install libtool autotools-dev automake checkinstall check libopus-dev libvpx-dev libsodium-dev ``` #### Fedora: ```bash sudo dnf install libtool autoconf automake check check-devel libsodium-devel opus-devel libvpx-devel ``` #### openSUSE: ```bash sudo zypper install libsodium-devel libvpx-devel libopus-devel patterns-openSUSE-devel_basis ``` #### Slackware:

List of all the toxcore dependencies and their SlackBuilds can be found here: http://slackbuilds.org/repository/14.1/network/toxcore/

#### Ubuntu <15.04: ```bash sudo apt-get install libtool autotools-dev automake checkinstall check libopus-dev libvpx-dev ```

You will need to install manually libsodium:

git clone git://github.com/jedisct1/libsodium.git
cd libsodium
git checkout tags/1.0.3
./autogen.sh
./configure && make check
sudo checkinstall --install --pkgname libsodium --pkgversion 1.0.0 --nodoc
sudo ldconfig
cd ..

toxcore compiling

Provided that you have all required dependencies installed, you can simply run:

git clone https://github.com/irungentoo/toxcore.git
cd toxcore
autoreconf -if
./configure
make -j$(nproc)
sudo make install
echo '/usr/local/lib/' | sudo tee -a /etc/ld.so.conf.d/locallib.conf
sudo ldconfig

Compile qTox

Make sure that all the dependencies are installed. If you experience problems with compiling, it's most likely due to missing dependencies, so please make sure that you did install all of them.

Run in qTox directory to compile:

qmake
make

If you had to compile FFmpeg manually, run this script from qTox directory before starting qTox:

cd libs/lib
export LD_LIBRARY_PATH="$PWD"
cd ../../

Now you can start compiled qTox with ./qtox

Congratulations, you've compiled qTox :)

openSUSE / Fedora:

Note to Fedora users: check qt5 version before building default is 4.8 on fedora 21 / 22, everything up until qmake-qt5 will build fine but then qmake-qt5 will freak out.

qmake-qt5
make

Debian / Ubuntu / Mint

If the compiling process stops with a missing dependency like: ... libswscale/swscale.h missing try:

apt-file search libswscale/swscale.h

And install the package that provides the missing file. Start make again. Repeat if nessary until all dependencies are installed. If you can, please note down all additional dependencies you had to install that aren't listed here, and let us know what is missing ;)

====

###Building packages

Alternately, qTox now has the experimental and probably-dodgy ability to package itself (in .deb form natively, and .rpm form with alien).

After installing the required dependencies, run bootstrap.sh and then run the buildPackages.sh script, found in the tools folder. It will automatically get the packages necessary for building .debs, so be prepared to type your password for sudo.

##OS X Compiling qTox on OS X for development requires 3 tools, [Xcode](https://developer.apple.com/xcode/) and [Qt 5.4+](http://www.qt.io/qt5-4/), and [homebrew](http://brew.sh).

###Required Libraries

First, let's install the dependencies available via brew.

brew install git ffmpeg qrencode

Next, install filter_audio (you may delete the directory it creates afterwards):

git clone https://github.com/irungentoo/filter_audio.git
cd filter_audio
sudo make install
cd ../

Then, clone qTox:

git clone https://github.com/tux3/qTox``

Finally, copy all required files. Whenever you update your brew packages, you may skip all of the above steps and simply run the following commands:

cd qTox
sudo bash bootstrap-osx.sh

###Compiling

Either open Qt creator and hit build or run qmake && make in your qTox folder and it'll just work™.

Note that if you use the CLI to build you'll need to add Qt5's bins to your path.

export PATH=$PATH:~/Qt/5.4/clang_64/bin/

###Fixing things up

The bad news is that Qt breaks our linker paths so we need to fix those. First cd in to your qtox.app directory, if you used Qt Creator it's in ~/build-qtox-Desktop_Qt_5_4_1_clang_64bit-Release most likely, otherwise it's in your qTox folder.

Install qTox so we can copy its libraries and shove the following in a script somewhere:

~macdeployqt qtox.app
cp -r /Applications/qtox.app qtox_old.app
cp qtox.app/Contents/MacOS/qtox qtox_old.app/Contents/MacOS/qtox
rm -rf qtox.app
mv qtox_old.app qtox.app
  • Give it a name like ~/deploy.qtox.sh
  • cd in to the folder with qtox.app
  • run bash ~/deploy.qtox.sh

###Running qTox You've got 2 choices, either click on the qTox app that suddenly exists, or do the following:

qtox.app/Contents/MacOS/qtox
  • Enjoy the snazzy CLI output as your friends and family congratulate you on becoming a hacker
##Windows

###Qt

Download the Qt online installer for Windows from qt-project.org. While installation you have to assemble your Qt toolchain. Take the most recent version of Qt compiled with MinGW. Although the installer provides its own bundled MinGW compiler toolchain its recommend installing it separately because Qt is missing MSYS which is needed to compile and install OpenCV and OpenAL. Thus you can - if needed - deselect the tab "Tools". The following steps assume that Qt is installed at "C:\Qt". If you decided to choose another location, replace corresponding parts.

###MinGW

Download the MinGW installer for Windows from sourceforge.net. Make sure to install MSYS (a set of Unix tools for Windows). The following steps assume that MinGW is installed at "C:\MinGW". If you decided to choose another location, replace corresponding parts. Check that the version of MinGW, corresponds to the version of the QT component!

###WGet Download the WGet installer for Windows from( http://gnuwin32.sourceforge.net/packages/wget.htm). Install them. The following steps assume that WGet is installed at "C:\Program Files\GnuWin32". If you decided to choose another location, replace corresponding parts.

###Setting up Path

Add MinGW/MSYS/CMake binaries to the system path to make them globally accessible. Open Control Panel -> System and Security -> System -> Advanced system settings -> Environment Variables...(or run "sysdm.cpl" select tab "Advanced system settings" -> button "Environment Variables") In the second box search for the PATH variable and press Edit... The input box "Variable value:" should already contain some directories. Each directory is separated with a semicolon. Extend the input box by adding ";C:\MinGW\bin;C:\MinGW\msys\1.0\bin;C:\Program Files (x86)\CMake 2.8\bin;C:\Program Files\GnuWin32\bin". The very first semicolon must only be added if it is missing. CMake may be added by installer automatically.

###Cloning the Repository

Clone the repository (https://github.com/tux3/qTox.git) with your preferred Git client. SmartGit is very nice for this task (you may need to add the path to the git.exe system variable Path). The following steps assume that you cloned the repository at "C:\qTox". If you decided to choose another location, replace corresponding parts.

Getting dependencies

Run bootstrap.bat in cloned C:\qTox directory Script will download rest of dependencies compile them and put to appropriate directories.