Skip to content

Peetz0r/GL.iNet-3310-LCD

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

10 Commits
 
 
 
 
 
 
 
 

Repository files navigation

#GL.iNet + 3310 LCD#

##The hardware## You basically connect the 3310 LCD pins directly to the GPIO pins of the GL.iNet. I hardwired the CE pin to GND and the led/backlight pin to 3.3V so I needed just 4 GPIO's. You could add a transistor and connect the led trough the 5th GPIO and change the brightness using PWM, but I did not do that.

I get 18 hours of battery life out of this 5200mAh USB battery pack. Quite impressive, with the backlight on and WiFi enabled all the time :)

##How to run this##

  • Get a GL.iNet
  • Flash a stock OpenWRT image on it
  • Run opkg install python python-imaging-library
  • If you run LuCI or uHTTPd (or anything really) on port 80, change this to another port
  • Place the script, html file and optionally the image in /root (or any directory)
  • Edit /etc/rc.local to start the script in the background
  • I configured OpenWRT to use wifi as WAN connection with a static IP (not using it as access point) and adding some firewall rules to make port 80 reacable on any interface
  • I also use another server as reverse proxy, but mostly just to use a subdomain (name-based virtual host) for this project where I only have one IP address
  • Reboot (or manually start the script in the background)
  • ...
  • PROFIT!

See it live at http://3310.haas-en-berg.nl/ (not 24/7, but close enough) (currently down because of wifi problems)

About

GL.iNet + 3310 LCD

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published