Skip to content

Latest commit

 

History

History
112 lines (81 loc) · 4.23 KB

haydn.md

File metadata and controls

112 lines (81 loc) · 4.23 KB
Raw

Installation Guide For Project Elixir

Installation Guide For Project Elixir on Redmi K40Pro/Pro+/Mi11i/Mi 11X Pro (haydn/haydnin)

Warning

  • Your warranty is void. Or valid, probably?
  • Project Elixir is not responsible for any damage you made to your device. You have been warned!
  • We are not responsible for anything that may happen to your phone by installing custom ROMs.
  • We are not responsible for anything that may happen to your phone by installing any kernels.
  • You do it at your own risk and take the responsibility upon yourself
  • You are not to blame Project Elixir or its respected developers for any of your loss.

Basic Notes for all users:

  • The provided instructions are for Project Elixir based on Android 14.
  • These will only work if you follow every section and step precisely
  • Do not continue after something fails! Contact in support group for help
  • The device must have an unlocked bootloader & has Platform Tools installed in pc.
  • If you are moving from any other Android version to Android 14, it is necessary to do CLEAN FLASH (Format Data)
  • Take a backup for safe side (If you are coming from older Android version or doing a clean flash)
  • For any queries or help related to Elixir, join our support group : Tap Here

Step 1: Download Required Files

  1. Download the latest Android platform tools for Windows from the link below:

  2. Download the Recovery from the link below:

    • Recovery Link [ For Android 14 ]: Recovery

  3. Download the Project Elixir ROM for Redmi K40 Pro/Pro+/Mi 11i/Mi 11X Pro aka Haydn/Haydnin from a reliable source.

Step 2: Install ADB and Boot into Fastboot Mode

  1. Make sure you have ADB (Android Debug Bridge) installed on your computer.

Important

If your device is listed, proceed to the next step. If not, make sure your device is connected properly and that USB debugging is enabled in the developer options.

  1. Extract the downloaded platform-tools zip file on your computer.

  2. Connect your device to your computer using a USB cable.

  3. Open a command prompt (Windows) or terminal (macOS and Linux) on your computer.

  4. Navigate to the location where you extracted the platform-tools.

  5. Enter the following command to check if your device is connected and detected by ADB:

adb devices

If your device is listed, proceed to the next step. If not, make sure your device is connected properly and that USB debugging is enabled in the developer options.

  1. Now, reboot your device into Fastboot Mode using the following command:
adb reboot bootloader

Step 3: Flash TWRP Recovery using Fastboot

  1. Once your device is in Fastboot Mode, use the following command to check if Fastboot still detects your device:
fastboot devices

If your device is listed, you are ready to flash the TWRP Recovery.

  1. Download the TWRP.img (from the link provided in Step 1).

  2. Place the downloaded TWRP.img in the same location as the platform-tools folder on your computer.

  3. Now, flash the TWRP Recovery using the following command:

fastboot boot twrp.img

Your device will reboot with TWRP Recovery installed.

Step 4: Flash Project Elixir

Clean Flash

- Download the latest build
- Take a backup for safe side
- Reboot to Recovery - must use A14 recovery - link below
- Wipe Data, Metadata, Cache & Dalvik-Cache
- Flash the latest build
- Reboot Recovery
- Format Data
- Reboot System

Dirty Flashing Steps

- Reboot to recovery
- Flash the rom.zip
- Reboot to System

Note

Notes specific to device build

  • A14 recovery: Tap here for link
  • Firmware and Gapps are already included in zip no need to flash additionally
  • If you are coming from A12/A13 to A14 then clean flash is compulsory and format data.

Important

Donate: Do consider donating or buying us a coffee