Skip to content

Latest commit

 

History

History
86 lines (71 loc) · 3.41 KB

redwood.md

File metadata and controls

86 lines (71 loc) · 3.41 KB
Raw

Installation Guide For Project Elixir

Installation Guide For Project Elixir on Redmi Note 12 Pro Speed / POCO X5 Pro 5G (redwood)

Warning

  • Your warranty is void. Or valid, probably?
  • Project Elixir is not responsible for any damage you made to your device. You have been warned!
  • We are not responsible for anything that may happen to your phone by installing custom ROMs.
  • We are not responsible for anything that may happen to your phone by installing any kernels.
  • You do it at your own risk and take the responsibility upon yourself
  • You are not to blame Project Elixir or its respected developers for any of your loss.

Basic Notes for all users:

  • The provided instructions are for Project Elixir based on Android 14.
  • These will only work if you follow every section and step precisely
  • Do not continue after something fails! Contact in support group for help
  • The device must have an unlocked bootloader & has Platform Tools installed in pc.
  • If you are moving from any other Android version to Android 14, it is necessary to do CLEAN FLASH (Format Data)
  • Take a backup for safe side (If you are coming from older Android version or doing a clean flash)
  • For any queries or help related to Elixir, join our support group : Tap Here

Step 1: Download Required Files

  1. Download the latest Android platform tools for Windows from the link below:

  2. Download the Recovery from the link below:

  3. Download the Project Elixir ROM for Redmi Note 12 Pro Speed / POCO X5 Pro 5G from a reliable source.

Clean Flash

  • Download the latest build

  • Take a backup for safe side

  • Download The Boot , Dtbo And Vendor_boot Images

  • Connect your phone to PC

  • Reboot To Fastboot ( Press Both Power_button_key + Vol_down_key)

  • Once your device is in Fastboot Mode, use the following command to check if Fastboot still detects your device:

fastboot devices

If your device is listed, you are ready to flash the Elixir Recovery.

fastboot flash dtbo dtbo.img

fastboot flash vendor_boot vendor_boot.img

fastboot flash boot boot.img
  • After flashing the recovery, use the following command to reboot your Recovery:
fastboot reboot recovery
  • Select Wipe Data/factory Reset & Confirm
  • Go back and select Apply update from ADB
adb sideload Project-Elixir*.zip(or drag down the rom zip to cmd)

Then kindly perform a format data in the recovery afterwards.

Reboot!

Dirty Flashing Steps

- Reboot to recover by holding power button and volume up simultaneously
- In the recovery menu select Apply update through ADB
- adb sideload Project-Elixir*.zip(or drag down the rom zip to cmd)
- After installation complete

Reboot! Enjoy!

Notes:

  • A14 recovery and vendor: Tap here for link
  • Rom comes with Gapps inbuilt.
  • Clean flash always recommended to get the best experience.

Important

Donate: Do consider donating or buying us a coffee