Warning
- Your warranty is void. Or valid, probably?
- Project Elixir is not responsible for any damage you made to your device. You have been warned!
- We are not responsible for anything that may happen to your phone by installing custom ROMs.
- We are not responsible for anything that may happen to your phone by installing any kernels.
- You do it at your own risk and take the responsibility upon yourself
- You are not to blame Project Elixir or its respected developers for any of your loss.
Basic Notes for all users:
- The provided instructions are for Project Elixir based on Android 14.
- These will only work if you follow every section and step precisely
- Do not continue after something fails! Contact in support group for help
- The device must have an unlocked bootloader & has Platform Tools installed in pc.
- If you are moving from any other Android version to Android 14, it is necessary to do CLEAN FLASH (Format Data)
- Take a backup for safe side (If you are coming from older Android version or doing a clean flash)
- For any queries or help related to Elixir, join our support group : Tap Here
-
Download the latest Android platform tools for Windows from the link below:
- Platform Tools Link (Windows): platform-tools-latest-windows.zip
-
Download the Recovery from the link below:
- Recovery Link: Tap here to download
-
Download the Project Elixir ROM for Redmi Note 12 5G / POCO X5 5G from a reliable source.
- Project Elixir ROM Link: DOWNLOAD
-
Download the latest build
-
Take a backup for safe side
-
Download recovery
-
Connect your phone to PC
-
Reboot To Fastboot ( Press Both Power_button_key + Vol_down_key)
-
Once your device is in Fastboot Mode, use the following command to check if Fastboot still detects your device:
fastboot devices
If your device is listed, you are ready to flash the Elixir Recovery.
fastboot boot twrp.img/elixir recovery
- After flashing the recovery, use the following command to reboot your Recovery:
fastboot reboot recovery
- Select Wipe Data/factory Reset & Confirm
- Go back and select Apply update from ADB
adb sideload Project-Elixir*.zip(or drag down the rom zip to cmd) & flash fw (if u want)
Then kindly perform a format data in the recovery afterwards.
Reboot!
### Dirty Flashing Steps
- Reboot to recover by holding power button and volume up simultaneously
- In the recovery menu select Apply update through ADB
- adb sideload Project-Elixir*.zip(or drag down the rom zip to cmd)
- After installation complete
Reboot! Enjoy!
- A14 recovery and vendor: Tap here for link
- Rom comes with Gapps inbuilt.
- Clean flash always recommended to get the best experience.
Important