Heatmiser NeoHub, NeoStat, NeoPlug Library

This library controls the wireless mesh NeoStat thermostats, via the NeoHub.

It talks the JSON-over-TCP protocol, on the LAN, to the Neo Hub - so no internet access is required.

I do not have any wifi neostats, just the "mesh networked" (aka zigbee) ones.

This library uses asyncio, and strives to be a well-behaved async home-assistant component.

Python 3.5 required!

Although as of Nov 2017, home-assistant only requires python 3.4 or newer, this component needs python 3.5+ (async/await).

Home-assistant is planning to require python 3.5 sometime early 2018 anyway, and many distributions are already using it anyway.

Example CLI Usage

$ export NEOHUB_IP="192.168.0.123"
$ ./neocli.py list

<NeoStat id=1  temp=20.8 name='Bedroom'>
<NeoStat id=2 temp=21.7 name='Office'>
<NeoStat id=3  temp=23.4 name='Kitchen'>

<NeoPlug id=4  status=OFF name='Desktop fan plug'>


$ ./neocli.py rename_zone "Bedroom" "Master Bedroom"
$ ./neocli.py frost_on "Master Bedroom"
$ ./neocli.py switch_on "Desktop fan plug"

Bit of a half-assed CLI, because I mainly built this libary for the...

Home Assistant Integration

Although functional, this is not production ready. For now, installation via custom_components dir in your ~/.homeassistant config dir:

custom_components/
  climate/
    neohub --> link to this repo neohub dir
    heatmiser_neohub.py --> link to this repo heatmiser_neohub.py

and in configuration.yaml:

climate:
  platform: heatmiser_neohub
  host: 10.0.0.197
  port: 4242
  debug: True

Troubleshooting

Connection Refused

This API uses the Legacy API over port 4242.

To use this functionality, you will need to enable Legacy API access for your NeoHub. To do this, log into the app > Settings > API Access > Legacy API Enable. Your NeoHub will now listen to port 4242.