Version 0.6.0

[benoit9126]

A new version with the following improvement/bug correction

• Add custom pint wrapper #149 BUG: DimensionalityError when voltage of the source is Quantity #145 Add custom pint wrapper for better handling of pint arrays.
• Deprecate LineParameters.from_name_lv method #148 ENH: LineParameters alternative constructors #122 deprecate LineParameters.from_name_lv() in favour of the more generic
  LineParameters.from_geometry(). The method will be removed in a future release.
• Add voltage unbalance calculation #142 ENH: Voltage Unbalance Factor (VUF) #136 Add Bus.res_voltage_unbalance() method to get the Voltage Unbalance
  Factor (VUF) as defined by the IEC standard IEC 61000-3-14.
• Add support for Python 3.12 and networkx graphs #141 ENH: NetworkX #137 Add ElectricalNetwork.to_graph() to get a networkx.Graph object
  representing the electrical network for graph theory studies. Install with the "graph" extra to
  get networkx.
  ElectricalNetwork also gained a new buses_clusters property that returns a list of sets of
  IDs of buses that are connected by a line or a switch. This can be useful to isolate parts of the
  network for localized analysis. For example, to study a LV subnetwork of a MV feeder. Alternatively,
  to get the cluster certain bus belongs to, you can use Bus.get_connected_buses().
• Add support for Python 3.12 and networkx graphs #141 Add official support for Python 3.12. This is the last release to support Python 3.9.
• Add network constraints for load flow analysis #138 Add network constraints for analysis of the results.
  • Buses can define minimum and maximum voltages. Use bus.res_violated to see if the bus has
    over- or under-voltage.
  • Lines can define a maximum current. Use line.res_violated to see if the loading of any of the
    line's cables is too high.
  • Transformers can define a maximum power. Use transformer.res_violated to see if the transformer
    loading is too high.
  • The new fields also appear in the data frames of the network.
• Add Qmin and Qmax limits #133 ENH: Maximum produced/consumed reactive power #126 Add Qmin and Qmax limits of flexible parameters.
• Add a doc page about converters and constants #132 DOC: Improve the documentation of additional RLF toolboxes (utils, constants, converters, etc.) #101 Document extra utilities including converters and constants.
• Flexible load documentation ++ #131 DOC: Flexible loads feasible domains #127 Improve the documentation of the flexible loads.
  • Add the method compute_powers method to the FlexibleParameter class to compute the resulting flexible powers
    for a given theoretical power and a list of voltage norms.
  • Add the plot_control_p, plot_control_q and plot_pq methods to the FlexibleParameter class to plot the
    control curves and control trajectories.
  • Add the extra plot to install matplotlib alongside roseau-load-flow.
• Flexible load documentation ++ #131 Correction of a bug in the error message of the powers setter method.
• Mark internal attributes as private #130 Mark some internal attributes as private, they were previously marked as public.
• Add some shortcuts to the Line class #128 Add the properties z_line, y_shunt and with_shunt to the Line class.
• Improve conda workflow #125 Speed-up build of conda workflow using mamba.

[alihamdan]

Great, thanks.

Please also make it clear in the release notes that this is the last version to support Python 3.9