export DOTNET_SYSTEM_NET_HTTP_USESOCKETSHTTPHANDLER=false # may be needed on debian / ubuntu based distro's
/opt/PleXZattoo/PleXZattoo /zattoo-username:<your username> \
/zattoo-password:<your password> \
/outfile:/opt/telly/channels.m3u8
# THIS SECTION IS REQUIRED ########################################################################
[Discovery] # most likely you won't need to change anything here
Device-Auth = "telly123" # These settings are all related to how telly identifies
Device-ID = 12345678 # itself to Plex.
Device-UUID = ""
Device-Firmware-Name = "hdhomeruntc_atsc"
Device-Firmware-Version = "20150826"
Device-Friendly-Name = "telly"
Device-Manufacturer = "Silicondust"
Device-Model-Number = "HDTC-2US"
SSDP = true
# Note on running multiple instances of telly
# There are three things that make up a "key" for a given Telly Virtual Tuner:
# Device-ID [required], Device-UUID [optional], and port [required]
# When you configure your additional telly instances, change:
# the Device-ID [above] AND
# the Device-UUID [above, if you're entering one] AND
# the port [below in the "Web" section]
# THIS SECTION IS REQUIRED ########################################################################
[IPTV]
Streams = 1 # number of simultaneous streams that telly virtual tuner will provide
# This is often 1, but is set by your iptv provider; for example,
# Vaders provides 5
Starting-Channel = 10000 # When telly assigns channel numbers it will start here
XMLTV-Channels = true # if true, any channel numbers specified in your M3U file will be used.
FFMpeg = true # if this is uncommented, streams are buffered through ffmpeg;
# ffmpeg must be installed and on your $PATH
# if you want to use this with Docker, be sure you use the correct docker image
# if you DO NOT WANT TO USE FFMPEG leave this commented; DO NOT SET IT TO FALSE [Issue #185]
# THIS SECTION IS REQUIRED ########################################################################
[Log]
Level = "info" # Only log messages at or above the given level. [debug, info, warn, error, fatal]
Requests = true # Log HTTP requests made to telly
# THIS SECTION IS REQUIRED ########################################################################
[Web]
Base-Address = "192.168.0.2:6077" # Set this to the IP address of the machine telly runs on AS SEEN BY PLEX
# telly will be telling Plex to connect to URLs at this address.
Listen-Address = "0.0.0.0:6077" # this can stay as-is
# THIS SECTION IS OPTIONAL ========================================================================
#[SchedulesDirect] # If you have a Schedules Direct account, fill in details and then
# UNCOMMENT THIS SECTION
# Username = "" # This is under construction; Vader is the only provider
# Password = "" # that works with it fully at this time
# AT LEAST ONE SOURCE IS REQUIRED #################################################################
# DELETE OR COMMENT OUT SOURCES THAT YOU ARE NOT USING ############################################
# NONE OF THESE EXAMPLES WORK AS-IS; IF YOU DON'T CHANGE IT, DELETE IT ############################
#[[Source]]
# Name = "" # Name is optional and is used mostly for logging purposes
# Provider = "Vaders" # named providers currently supported are "Vaders", "area51", "Iris"
## IF YOUR PROVIDER IS NOT ONE OF THE ABOVE, CONFIGURE IT AS A "Custom" PROVIDER; SEE BELOW
# Username = "YOUR_IPTV_USERNAME"
# Password = "YOUR_IPTV_PASSWORD"
# # THE FOLLOWING KEYS ARE OPTIONAL IN THEORY, REQUIRED IN PRACTICE
# Filter = "YOUR_FILTER_REGULAR_EXPRESSION"
# Telly is written in Go, and uses the Go regular expression system,
# which is limited compared to other regular expression parsers.
# FilterKey = "group-title" # Telly applies the regular expression to the contents of this key in the M3U.
# FilterRaw = false # FilterRaw will run your regex on the entire line instead of just specific keys.
# Sort = "group-title" # Sort will alphabetically sort your channels by the M3U key provided
#[[Source]]
# Name = "" # Name is optional and is used mostly for logging purposes
# Provider = "IPTV-EPG" # DO NOT CHANGE THIS IF YOU ARE USING THIS PROVIDER
# Username = "M3U-Identifier" # From http://iptv-epg.com/[M3U-Identifier].m3u
# Password = "XML-Identifier" # From http://iptv-epg.com/[XML-Identifier].xml
# # NOTE: THOSE KEY NAMES DO NOT MAKE SENSE FOR THIS PROVIDER ################
# # THIS IS JUST AN IMPLEMENTATION DETAIL. JUST GO WITH IT.
# # For this purpose, IPTV-EPG does not have a "username" and "password", HOWEVER,
# # telly's scaffolding for a "Named provider" does. Rather than special-casing this provider,
# # the username and password are used to hold the two required bits of information.
# # THIS IS JUST AN IMPLEMENTATION DETAIL. JUST GO WITH IT.
# # NOTE: THOSE KEY NAMES DO NOT MAKE SENSE FOR THIS PROVIDER ################
# # THE FOLLOWING KEYS ARE OPTIONAL HERE; IF YOU"RE USING IPTV-EPG YOU'VE PROBABLY DONE YOUR
# # FILTERING THERE ALREADY
# # Filter = ""
# # FilterKey = ""
# # FilterRaw = false
# # Sort = ""
[[Source]]
Name = "Zattoo" # Name is optional and is used mostly for logging purposes
Provider = "Custom" # DO NOT CHANGE THIS IF YOU ARE ENTERING URLS OR FILE PATHS
# "Custom" is telly's internal identifier for this 'Provider'
# If you change it to "NAMEOFPROVIDER" telly's reaction will be
# "I don't recognize a provider called 'NAMEOFPROVIDER'."
M3U = "/etc/telly/zattoo.m3u8" # This can be either URL or fully-qualified path.
# This needs to be an M3Uplus file
# IT CANNOT BE A STREAM ADDRESS
# IT CANNOT BE AN M3U THAT LINKS TO ANOTHER M3U
EPG = "https://github.com/sunsettrack4/xmltv_epg/raw/master/zattoo-epg-de.gz" # This can be either URL or fully qualified path.
# THE FOLLOWING KEYS ARE OPTIONAL IN THEORY, REQUIRED IN PRACTICE
# Filter = "YOUR_FILTER_REGULAR_EXPRESSION"
# Telly is written in Go, and uses the Go regular expression system,
# which is limited compared to other regular expression parsers.
# FilterKey = "group-title" # Telly applies the regular expression to the contents of this key in the M3U.
# FilterRaw = false # FilterRaw will run your regex on the entire line instead of just specific keys.
# Sort = "group-title" # Sort will alphabetically sort your channels by the M3U key provided
# END TELLY CONFIG ###############################################################################
telly:
image: tellytv/telly:dev-ffmpeg
container_name: telly
restart: always
ports:
- "6077:6077"
volumes:
- /opt/telly/telly.config.toml:/etc/telly/telly.config.toml
- /opt/telly/channels.m3u8:/etc/telly/zattoo.m3u8
environment:
- PGID=1000
- PUID=1000
- TZ=Europe/Berlin